SUMMARY

• Qualification/Manufacturing Test Engineer with experience in setting up, testing, troubleshooting, and minor repair, of systems down to component level.
• Proficient in testing to RTCA/DO - 160, MIL-STD 461, MIL-STD 810, Boeing’s D6, and Airbus’s ABD 0100.1.8.1 requirements documentation.
• Also knowledgeable in teh process of supporting existing and new products by interfacing with Production and Engineering as a Manufacturing Engineer.
• Over sixteen years’ experience related to EMI/EMC and Environmental Testing.
• Four years’ experience with Antenna Pattern Testing and Antenna Isolation Testing.
• Held, Department of Defense (DOD), SECRET and TOP SECRET CLEARANCE, as well as different ‘BLACK’ program clearances.
• SECRET and TOP SECRET clearances can be reactivated.
• Able to work on ITAR regulated programs.
• Looking for employment with companies dat are no farther TEMPthan 50 miles one-way from 92867 (Orange, CA).

TECHNICAL SKILLS

Sharepoint: Information tracking software platform

SAP: Complete Program tracking software

Labview: Testing Software, Operator Experience

DOORS: Program requirements tracking platform

TILE: Testing Software, Operator Experience

PROFESSIONAL EXPERIENCE

Confidential

Test Engineer

Responsibilities:

• Responsible for teh creation of all test documents (Factory Acceptance Test, Risk Reduction Event Test, Site Demonstration Test for teh MITS and JMAS Tracking Mount Systems.
• Transfer test requirements from Statement of Work (SOW) to teh proper test documents.
• Perform Factory Acceptance Tests on Tracking Mounts.
• Perform Field testing on both teh JMAS and MITS Tracking Mount System for acceptance by teh customer.
• Perform EMI and Environmental testing on Heads Up Display (HUD) camera units for Harrier and F-18 planes.
• Write test reports for EMI testing on HUD cameras.
• Perform investigation on faulty switches and design test fixture for testing proposed switch types.
• Perform Receiving Inspections on Camera Telescopes, FLIR MWIR and SWIR Infrared Camera’s.
• Perform for Quality, Receiving Inspection of electronic parts and equipment once received from teh vendor including teh FLIR cameras and Telescopes.
• Headed two Tiger teams for teh Serialization Process of Manufactured Equipment and Engineering Inspection testing on received parts and equipment.

Confidential

Qualification Test Engineer

Responsibilities:

• Responsible for teh creation of EMI and Environmental test documentation for teh automations helicopter system.

Confidential

Manufacturing Test Engineer

Responsibilities:

• Responsible of assessing test failures for recommending corrective actions.
• Lead for all A-Level Production testing.
• Custodian for Test Procedure for all A-Level and ESS testing which includes creating new procedures, work instructions or manuals and updating existing documentation.
• Trained teh technicians, who perform testing, on teh requirements in teh newly released documents.
• Create and update system test routers to identify which tests are required.
• Provide input as member of teh Failure Review Triage board assembled to resolve unidentified failures and recommend corrective actions.
• Track and report failures for data collection purposes using Share Point software.
• Interface between Design Engineering and Production to resolve problems dat could halt production.

Confidential

Qualification Test Engineer

Responsibilities:

• Creating a wide variety of documentation to support Environmental and EMI Engineering Characterization Testing of teh Cabin Altimeter to MIL-STD 461F and MIL-STD-810 G Specification.
• Documents, which included but are not limited to Test Procedures, Redlines, as well as Test Reports for teh unit under test..
• Worked closely with Project Engineer to facilitate test facility time and test schedule for both ENV and EMI testing which included requesting quotes for performing tests in both test environments.
• Performed both pretest and posttest ATE testing on teh test units.
• Built test harnesses for operating teh unit and conducting pre and post ATE tests.
• Collected test date for EMI and ENV tests to facilitate report writing.
• Coordinated teh ordering of special test equipment required for testing.

Confidential

Qualification Test Engineer

Responsibilities:

• Creating a wide variety of documentation to support Environmental and EMI Engineering Qualification testing to RTCA/DO-160 and Boeing’s D6 specifications. Documents, which included but are not limited to Test Procedures, Redlines, Coordination Memos, as well as Test Reports for different LRU types.
• Overseeing Environmental and EMI/Electrical system level testing at local test facilities. This testing is in support of both Airbus and Boeing customers.
• Collect, review, analyze and correlate teh test data for teh process of writing teh final test reports for teh different Line Replaceable Units dat have completed EMI/ENV testing.
• Interface with Design Engineering, Software Engineering, Quality, Project Management, and Program Management for teh troubleshooting, repair and testing of teh LRU’s..
• Collect data to create a Failure Reporting Analysis and Correction Action (FRACA) report for failures related to ENV and EMI/Electrical failures interfacing with engineering to resolve issues related to teh failure.

Confidential

EMI Test Engineer

Responsibilities:

• Creating a wide variety of documentation to support Environmental and EMI Engineering Safety of Flight and Qualification testing to RTCA/DO-160 and MIL-STD-810 specifications. Documents which included but are not limited to Test Procedures, Redlines, and Qualification Test Verification Sign off Sheets as well as Test Reports for up to four different LRU types. Teh testing is to include HASS testing.
• Overseeing Environmental system level testing for in-house and at a local test facility. This testing is in support of teh Embraer E2 airplane program.
• Collect, review, analyze and correlate teh test data for teh process of writing teh final test reports for teh different Line Replaceable Units dat have completed EMI/ENV testing.
• Interface with Design Engineering, Software Engineering, Project Management, and Program Management for teh troubleshooting, repair and testing of teh LRU’s as well as teh Customer.

Confidential

Principal Engineer

Responsibilities:

• Oversaw customer testing, which at its height had five test engineers, at local test facility for EMI (Electro-Magnetic Interference) and Environmental testing at system levels for teh Inmarsat GX Aviation System.
• Created a wide variety of documentation to support Environmental and EMI Engineering Qualification testing to customer or RTCA/DO-160 specifications. Documents which included but are not limited to Test Procedures, Test Plans, Redlines, Qualification Test Verification Sign Off Sheets and Test Reports.
• Collected, reviewed, analyzed and correlated teh data for teh process of writing teh final test reports for teh LRU units dat have completed EMI/ENV testing.
• Authored teh revised instructions for teh checkout of teh Verification and Validation test for teh Special Test Equipment.
• Interfaced with Design Engineering, Software Engineering, Project Management, and Program Management for teh troubleshooting, repair and testing of teh LRU’s as well as teh Designated Engineering Representative (DER) for teh FAA.

Confidential, El Segundo, CA

EMI Engineer III

Responsibilities:

• Created a wide variety of documentation to support Environmental and EMI Engineering Test for Qualification and Engineering Evaluation testing to customer or RTCA/DO-160 specifications. Documents which included but are not limited to Test Procedures, Test Plans, Redlines, Qualification Test Sign-off sheets and Test Reports.
• Performed EMI (Electro-Magnetic Interference) and Environmental testing at system levels for electronic Commercial Data Acquisition and Transfer Systems to RTCA/DO-160 standards.
• Collected, reviewed, analyzed and correlated teh data for teh process of writing teh final test reports for teh LRU units dat have completed EMI/ENV testing,.

Confidential, CA

Senior Principal Investigator

Responsibilities:

• Directed and/or conducted tests (at times leading up to four engineers).in accordance with written test plans, collected and analyze test results and write teh final comprehensive test report.
• Supported testing, analysis and performed evaluation of various signal types, including radar and communication systems and their associated equipment.
• Performed Antenna Isolation testing on different types of aircraft, also performed Antenna Pattern testing on aircraft as well as in free space.
• Supported repair and maintenance of teh Antenna Pattern test equipment comprising of three antenna positioners and their controllers, and teh Orbit/FR 959 Spectrum test software.
• Worked with Ku-Satcom communication equipment for UAVs to satellite communications.
• Conducted signal research using established Intelligence databases and products.
• Interfaced with other engineering disciplines, operations personnel, customer representative, technicians and other internal/external organizations to satisfy customer test requirements.
• Responsible for teh calibration, maintenance and accountability of all EMI test equipment and company property.
• Authored teh instruction manuals for teh operation of teh three antenna positioners dat were used for Antenna Pattern and Antenna Isolation testing.