Job Seekers, Please send resumes to resumes@hireitpeople.com

Detailed Job Description:

• Hands- on experience on N9K, NCS switches.
• Hands- on experience in configuring vPC, Intel 10G,25G, 40G interfaces.
• Very Good Troubleshooting expertise on LACP, LLDP.
• Bringing up the Setup (.i.e. Rack Stack ).
• Hands- on experience in changing the faulty drives (HDD, SSD).
• Hands- on experience in installing SRIOV cards on UCS-C, Quanta, HP, DELL servers.
• Hands- on experience in boot flashing the intel drivers.
• Hands- on experience in procurement when there is a need on the HW parts.
• Hands- on experience in doing RMA.
• Very strong expertise in configuring the routing, switching between the Testbeds own by the team.
• Hands- on working experience in HWs like (UCS-b,C , Quanta).
• Hands- on experience in ACI, Leaf/spine Topology.
• Hands- on experience in configuring BGP, OSPF based on the requirements.
• Hands- on experience in upgrading Nexus os, NCS switches, etc.
• Ability to setup the end-end network topology for NFVI product architecture.
• Ability to troubleshoot and solve networking problems.
• Install new / rebuild existing servers and configure hardware, storage, etc. in accordance with standards and project requirements.
• Hands- on experience with installation/configuration/troubleshooting of the appliances.
• Cisco UCS® C240 M4/M5 , Cisco UCS C220/240 M4/M5, HP DL360 Gen9, Cisco UCS 220/240 M4/M5 (SFF), Quanta servers, Cisco UCS B200 M4 blades, Nexus 9k, NCS- 5500, ASR9K.
• Strong knowledge of configuration of routing protocols such as BGP, OSPF, ISIS, IPv4/IPv6, MPLS, Multicast, security, QoS and VLANs are required.
• Apply OS patches and upgrades on a regular basis. 

Experience required: 10 Years