SUMMARY

• Secure a challenging position wif growth opportunity utilizing personal aerospace and product development design and structural analysis expertise, along wif technical noledge to create an environment for business success.

TECHNICAL SKILLS

Tools: SolidWorks, LabVIEW, ANSYS 8.0, MSC.Patran, CATIA V5, CATIA V4, Product Data Manager, IVT, ENOVIA V5 and V6, SmarTeam, Siemens NX6, Pro-E Creo 2.0, Windchill, AutoCAD, Zuken CR5000, CreoView 3.0, Teamcenter, and Vismockup

Operating Systems: Windows 10, 8, 7, Windows Vista, XP, 2000, 98

Applications: MS Word, Excel, PowerPoint, PROJECT, Matlab, DOORS
 

PROFESSIONAL EXPERIENCE

Confidential

Senior System Engineer

Responsibilities:

• Worked wif NISSC technical baseline team wif updating CCIC2S, Legacy Space, and Enterprise Baseline Network Design Documents, NW Topology, Authorization Boundary Documents for upgrades to NORAD Cheyenne Mountain and other affiliated systems.
• Use IBM Rational Clear Quest and Engineering Lifecycle Management System to carry documents through teh System Engineering Change Board to be implemented by teh ELMS Rhapsody Team.
• Investigate System Change Requests for teh NISSC Technical documentation to upgrade systems at Peterson Air Force Base and Cheyenne Mountain for SPADOC, CCIC2S, and other associated system in teh network.
• Worked wif teh Mission Planning Team on teh V - 22 Osprey Program wif updating User Interface Design Documents, running Mission Planning Software for upgrades to teh avionics and mission planning computers.
• Used programs such as Falconview, CV-22 AWE, and other programs used to run system engineering tests in relation to different functionality types in Mission Planning.
• Used IBM Rational DOORS in updating requirements, running system engineering and software engineering test cases to test different features and programs associated wif mission planning.

Confidential

Responsibilities:

• Worked wif teh Integration, Verification, and Validation group on teh AWW-13 Digital Data Link Pod Program wif making Integrated Test Plan and Airworthiness documents for internal System Requirements Review.
• Worked on teh Antenna Switch Assembly wif making Verification Cross-reference Matrices, Requirements Allocation, and specification development for teh RF Switch on teh AWW-13 Digital Data Link Pod Program to support Preliminary Design Review.

Confidential, Warren, Michigan

Mechanical Engineer

Responsibilities:

• Designed teh C4ISR installation and Countermeasures Installation bracketry, systems, and created FEA analysis using BETA CAE for loads analysis for mechanical systems on teh Mobile Protected Firepower contract for GDLS.
• Used CREO Parametric 3.0 and Teamcenter Vismockup 10.1 in creating structural components and mechanical subsystem parts.

Confidential, Sterling Heights, Michigan

Mechanical Engineer

Responsibilities:

• Created request for variances and request for changes to existing AAV engineering drawings and assemblies for updates to engineering parts.
• Carried out a root cause corrective action on updated parts to make sure dat existing parts are made to print based upon program requirements.
• Created work instructions for assembly personnel for putting together part assemblies and installation onto teh five different variants for teh Armored Multi-Purpose Vehicle.
• Used PTC Pro-Engineer CREO in creating pictorials for installation of mechanical equipment by operational sequence number based upon where teh vehicle is in teh assembly line.
• Designed a replacement military armored infantry fighting vehicle for teh United States Army to replace teh aging Bradley Fighting Vehicle.
• Used PTC Pro-Engineer CREO in creating structural components and mechanical subsystem parts.

Confidential, Northville, Michigan

Design Engineer

• Used CATIA V5 and Zuken CR5000 to route electrical wire harnesses for Toyota cars and trucks.
• Created electrical routing systems for teh cars and trucks such as engine room main, instrumentation panel, floor and others used to run power throughout teh entire vehicle.

Confidential, Hornell, New York

Electrical Design Engineer

Responsibilities:

• Used AutoCAD 2014 and E3 Schematic System to route electrical harnesses for light rail train vehicle systems.
• Created electrical routing systems for teh train such as auxiliary power, battery, and cabin console control power as well.

Confidential, Gainesville, Texas

Design Engineer

Responsibilities:

• Used CATIA V5 and SmarTeam to develop aircraft seats used on Boeing and Airbus aircraft, including aircraft seats for Sri Lanka airlines on Airbus A330 aircraft like Z300 model seats.
• Used Pro Engineer and Intralink in teh translation of models from Pro E into CATIA V5 for aircraft seats design and development, including designed seat structure tooling used to put teh aircraft seats together during teh assembly process for ease of manufacturability.

Confidential, Utah

Design Engineer

Responsibilities:

• Worked wif hydro mechanical actuation systems for hydraulic fluid actuated systems such as actuators, manifolds, linkages for teh flaps and control surfaces for aircraft and landing gear.
• Used CATIA V5 and ENOVIA V6 for designing control systems equipment and storage of models after they has been completed or are in work.
• Designed a nose wheel gear steering assembly for teh Boeing 737-MAX aircraft and slat actuator assemblies for teh new Gulfstream AAP Program, along designed and refined tooling used for teh assembly of hydro mechanical actuator components together.

Confidential, Tempe, Arizona

Mechanical Designer NE

Responsibilities:

• Worked on cleaning up teh CATIA V5 datasets for renaming convention and how teh parts were constrained in teh CAT Product assemblies.
• Coordinated wif other teammates and Goodrich for issues dat come up from teh data cleanse process.

Confidential, Mesa, Arizona

Mechanical Systems Design and Analysis Engineer

Responsibilities:

• Worked on a Side guide Intercostal Optimization for teh 787-8 and -9 Section 43 side guide intercostal.
• Worked on PEEK fastener change of screws to push pin screws for 787-8 Section 43 ECS ducts.
• Coordinated wif 787-8 and -9 Section 43 team for issues dat come up from carrying design changes through teh design change process. Optimized and redesigned composite layup tooling jigs for fabrication of intercostals and frames for teh 787 Section 43 fuselage section.
• Worked in teh Selective Laser Sintering Lab on making plastic parts used on teh AH-64 Apache, A-160 Hummingbird, and other programs dat needed SLS support.
• Used Unigraphics NX6 and Team-Center in teh creation of “stl” files dat contained CAD models which were loaded into teh Sinterstation 2500 machine which created SLS parts
• Design plastic fixture tooling used in teh drilling of determinate assembly holes in teh composite skin panels for teh A-160 Hummingbird program.

Confidential

Product Review Engineer

Responsibilities:

• Disposition routine nonconforming parts in Electronic Product Assessment Record (EPAR) system and Longbow Apache Product Assessment Record (LAPARR) system to figure out corrective action for parts.
• Participated in Material Review Board and Integrated Product Teams by coordinating in cross function teams across disciplines on teh AH-64 Apache Helicopter Program.
• Disposition parts on teh AH-64 Apache Attack Helicopter, F/A-18 Hornet, F-15 Eagle, and other IWA Programs dat needed support.
• Performed root cause analysis and corrective action of non-conformances to reduce scrap, minimize rework, reduce cost and improve quality to meet all requirements.

Mechanical Systems Design and Analysis Engineer

Confidential

Responsibilities:

• Created impact drawings in CATIA V5 used for structural impact testing for teh aft wheel well bulkhead and horizontal pressure deck.
• Coordinated wif Section 45 Test Team for placement of strain gages and issues dat come up from structural testing.
• Designed impact test tooling used to create test specimens dat allow teh specimens to be attached to teh test fixtures used during impact testing.

Confidential

Responsibilities:

• Used CATIA V5 in designing interface control models for teh Cargo Floor Handling System in Sections 41, 43, and 46, creating layout drawings in support of drawing release.
• Coordinated wif other structural design Integrated Product Teams and aircraft partners for concurrence on design issues associated wif aircraft design.

Confidential, Renton, Washington

Structural and Payload Design Engineer

Responsibilities:

• Used CATIA V4 in designing Skin Lap Integration Joints, stringers, creating layout drawings in support of drawing release.
• Coordinated wif other structural design Integrated Product Teams for concurrence on design issues associated wif aircraft design. Created engineering bill of materials in Program Data Manager to support drawing release.
• Designed Body Handling Fitting tooling used during assembly dat rotates fuselage from upside down configuration to right side up

Structural and Payload Design Engineer

Confidential

Responsibilities:

• Used CATIA V4 in designing structural side frames and creating layout drawings in support of drawing release.
• Created hydroforming tooling used for teh bending of structural frames and shear ties dat attach to teh skin panels.
• Coordinated wif other structural design Integrated Product Teams for concurrence on design issues associated wif aircraft design, along wif creating engineering BOM in Program Data Manager to support drawing release.

Structural Analysis Engineer

Confidential

Responsibilities:

• Used MSC.Patran as FEA analysis of components to create strength check notes and supporting structural analysis lead’s tasks. Worked wif teh support structure from main mechanical systems to teh primary structure.
• Designed and analyzed tooling used for attaching On Board Inert Gas Generation System components to primary structure.