SUMMARY:

• 20+ years Experience in Engineering, Designing, Fabrication, Installation, Project Management, Repair, Maintenance, Programming, Applications Review, Product Selection, Field Startup Support,, and Purchasing of equipment and software for Electrical, Instrumentation, Controls, Automated Systems, Process Controls, Machinery, Data Communications, and Wireless me/O & Networks.
• 14+ years Experience in, Engineering Sales and Applications Engineering, Estimating, Project Management, Take - offs, Proposals, BOM's, RFQs, RFIs, Submittals, and O&M's for EI&C Projects.
• 5 years Experience in Sputtering, PECVD, Laser Etch, Plasma deposition, Rebuilding complete controls for Sputtering Machines, and Startup and programming PECVD Machine, and knowledge of Cryo-Vac, and RF Power Supplies
• 4 years Experience in Engineering, Designing, Programming, and integration of BMS, EMS, and BACnet systems, wired and wireless

PROFESSIONAL EXPERIENCE:

Confidential

Project Manager / Applications Engineer/ Estimator

Responsibilities:

• Promoted Sales of in house designed and fabricated Lighting, Access, and HVAC Controllers and UL508A Panels, and Other Vendor Equipment and systems, including Schnieder and Delta Controls Project Manager/Applications Engineer for Commercial, Telecom, & Cable projects. Estimating Take - offs for formal Project Proposals to Clients and Corporate Facilities Management for Electrical, Lighting, HVAC, Monitoring and Controls Turned wrong number call into a sales opportunity for 31 complete system installations. Engineering Sales, Create individual Take-Offs for Proposals from Architectural, Electrical, and Mechanical Plans and Specifications for 210+ National Express Mall Retail stores HVAC and Lighting Controls. Design, Integration Programming and Project Management for the Installation, Startup, and commissioning of each site.
• Project Manager, Application, Engineering, Design, Fabricating, Installation, and Integration of Electrical, HVAC, and Lighting control systems. Managed Contracted System Installers for turn-key projects of HVAC, Lighting Controls, and Monitoring of Power, HVAC, and Lighting for Cable Hubs, Telecom, and Towers Supported Sales Staff as Sales Engineer for Electrical,
• Controls, HVAC, and Wireless Projects Provided and Prepared Documentation for installed systems. Use communications skills to develop leads for current and future projects. Provide Remote NOC Applications Engineering Support to Facilities Managers and Service Technicians for HVAC Controls, Units, and Lighting Controls for nation-wide T-Mobile and Express retail stores. Provided remote interactive IIOT support and repair trouble shooting and guidance to HVAC facilities Managers and HVAC field repair technicians. Created Customized Take-Off spreadsheet in Microsoft Excel for Labor, Materials, Project
• Duration, lead time, cost, and Margin to generate Client Proposals, and managing projects to meet or exceed margins. Programmed algorithms for HVAC and Lighting controllers to a 30% savings in client's energy costs.

Confidential

Controls & Automation Estimator

Responsibilities:

• Project Manager/Applications and Sales Engineer for Large & Small projects, Supported Controls Sales Account Manager as Sales Engineer for Electrical, Controls, and Automation Projects Developed Customized Excel Take - Off spreadsheet to include Labor wif Burden, Engineering, Materials, Fabrication, Administrative, Deployment, Tools, and Project Duration in Microsoft Excel Analyzing project cost from current and past Bid and proposal data to support new products and cost estimates. Attend Bid Meetings and Walkdowns to accurately compile data for accurate Bid Take-Offs and Proposals Contact GCs,
• Vendors, and Subs from Bid Meeting sign in sheets for RFQs and RFI's, and to identify competitive Bidders. Estimating & Proposals to Direct Clients, GCs, Sub-Contractors, and Company Internal Divisions for Electrical, Controls, Instrumentation, VFDs, E-Houses, Data Centers, theme park ride controls for
• Disney, Universal, Busch Gardens, and Industrial Electrical and Controls for a variety of other industries - Water/Wastewater, Reclaimed, Power Service Entrance, Mining, Sugar, and Citrus Estimates and Proposals for Client Design Builds by Pre-Engineering, Design, Product Selection, Application Review of Equipment, and project Bill of Materials. Sales Engineer, Applications Engineer, and Project Manager for the Fabrication, Installation, and Startup of 32 quadraplex digital controller/panel meter pump control panels for Dam Safety Reservoir Protection Project Manager, Application, Engineering, Design,
• Fabricating, Installation, and Integration of Electrical, Instrumentation, and Automation Controls Projects to a 35%+ labor & materials margin On Site Project Management for projects, managed Foremen, Journeymen, Electricians, Apprentices, and Sub-Contractors Provided and Prepared Documentation for RFI's, Submittals, and O&M manuals Start-Up Support, Field Installation, Field Service and Sales support wif GCs, Engineers, Sub Contractors, and Clients Hands on Technical support for projects wif Installers, Technicians, Electricians, and Helpers Developed and edited documents and drawings for
• Engineering and Clients using Adobe Pro and AutoCAD Managed Fabrication of UL508A Panels, and Vendor Account Equipment, Supplies, Costs, and Discounts Worked effectively wif clients, GCs, Sub-Contractors, Vendors, and Company Divisions Work hours as needed to support company goals and deadlines.

Confidential

Programmer

Responsibilities:

• Sales/Project Management - $750,000.00 project City of Cocoa Beach. Demolition of Old Controls, Upgraded, and integrated into Allen Bradley PLC 500/5000 system in a VTSCADA Plant Wide HMI. Project Management, Engineering, Design, Fabrication, Applications Engineering/Sales, Field Service, Installation, and Integration of Industrial Automation Controls to maintain 35% project margin Supervised Engineers, Designers, Superintendents, Foremen, Journeymen, Electricians, Apprentices, Sub-Contract labor, and Supervised the fabrication of UL 508A Control Panels Design, Estimating, Fabrication, and
• Integration of Electrical, Instrumentation, Controls, Panels, PLCs, RTUs, DCS, and SCADA systems for Water/Wastewater/Reclaimed Clients Radio Modeling Software and GPS information to produce radio models for feasibility before ordering of equipment or wasting man-hours at field locations Start-Up,
• Engineering/Sales, Field Service, and for Field Installations wif GC's, Engineers, Sub Contractors, and Clients Hands on Technical support for projects wif Installers, Technicians, Electricians, and Helpers Participated in Vendor Siemens events Checkout, Testing, and Programming for Chiller Water recycle filter skid at the TECO Polk Power Station Wireless Model and Site Survey for Duke Energy DeBary Power Station for Wireless Remote Gas Valve control and monitoring Designed Panel Layouts. Fabricated Control Panels, upgraded & rebuilt automated machinery & processes, and maintained working demo systems for client & demonstrations Engineered, Designed, Implemented, and Maintained RF Telemetry systems, Installed Wireless Ethernet, Cellular, Remote me/O, Gateway systems, and RF Radio Site Surveys Direct experience wif Estimates, Proposals, and Closing Contract Bids for EI&C Contracts to $1.5
• Million, Interaction wif Clients as Applications Engineer, Technical Support, and Consultant to provide Clients wif complete project satisfaction Interaction wif General Contractors & Clients, Pre & Post Bid and Sales. Conducted Formal and Informal Pre & Post Bid Meetings, Problem Solving and Discussion sessions Understanding and Interpretation of statement/scope of work, specifications, and plans for Engineering, Design, Estimating, and Project Management Application review and Product selection of Equipment & Materials wif the Preparation & Generation of BOMs & Submittals, as-built drawings, and turn-over packages Actively supported business development and Sales to promote new business opportunities.

Confidential

Sr. System Engineer

Responsibilities:

• Engineering Sales, Applications Engineering, Project Management, Estimation, Proposal, and Bidding of a $1.57M WTP Process Control Upgrade from Antiquated Relay Logic controls to a new Allen Bradley Control Logix Redundant Controllers Fiber Optic Remote Rack Control System wif Wonderware HMI, and Provided for the Client Project Management, Engineering, Design, Field Service, Fabrication, Sales, Applications Engineering, and direct contact wif contractors, sub - contractors, and clients. Driving Projects to a company standard 35% margin Project Management of Electrical Construction projects for
• Water/ Wastewater/ Reclaimed Water Plants, and Distribution Project Manager for Power Generation Outages DCS/SCADA Upgrades, Repairs, and Maintenance wif hands on experience wif Power Generation Outage El&C Upgrades, Cable Drops & Terminations, Checkout, Point to Point, and
• FunctionalTesting on Ovation DCS System using P6 Applications Sales, Project Management - Designed, Engineered, and Fabricated Control Panels for a Diesel Power Generation Plant, Diesel Fuel Management System, providing power for the St. Regis Temenos Resort, Anguilla, British West Indies Applications Sales, Project Management - Designed, Engineered, and Integrated Wireless me/O systems for remote monitoring of County Wide Reclaimed/Potable Water Systems. Using Weidmuller 900Mhz Spread Spectrum me/O Radios & Gateways, ModBus TCP protocol, and Wonderware Intouch HMI System.
• Provided for maintenance technicians. Drove multiple $15,000.00 projects to a minimum of 35% gross margin Hands on Management and Supervision of Engineers, Designers, Superintendents, Foremen, Journeymen, Electricians, Apprentices, and Sub-Contract labor Engineering, Design, Lay-out, and
• Supervision of the fabrication of UL 508A Control Panels Estimates and Proposals for Lighting installations and verification of Lighting Drawings & Fixtures to Lux standards for Office and Industrial areas Use of Radio Modeling Software & GPS information to produce radio models for feasibility before ordering of equipment or wasting man-hours at field locations. Engineered, Designed, Implemented, Fabricated, Installed, and Maintained RF Telemetry systems in licensed 900 MHz Spread Spectrum Remote me/O / Gateway systems Start-Up, Engineering/Sales, Field Service, and for Field Installations wif GC's,
• Engineers, Sub Contractors, Installers, Technicians, Electricians, Helpers, and Clients Engineering, Designing, Estimating, Programming, Fabrication, and Integration of EI&C projects, PLCs, RTUs, DCS, SCADA, and Lighting systems. Upgrading, Field Service, Process Improvement, and rebuilding controls, and automated machinery Estimating and closing Contract Bids for EI&C Contracts to $15.5M Interacted wif Contractors and Clients as Customer Service/Sales Rep and Technical Support Consultant and provided Clients wif complete project satisfaction.

Confidential

Automation Systems Technician

Responsibilities:

• Design, Engineering, Installation, Repair, Maintenance, Product Selection, and Requisitioning the purchase of state of the art Manufacturing Machinery, Instrumentation, Controls, and Systems Design, Engineering, Repair, and Project Management to facilitate the rebuilding of older obsolete machines and controls, and provide maintenance and optimization for new Upgrades, Designs, improvements, and Control Concepts Complete Machine Automation Upgrade for three Sputtering Machines, Engineering, Design, Programming, and Fabrication & Modification of part tray handling and end effector Robotic
• Controls to transfer part trays from PECVD chamber thru clean room sealed passage for part processing Data Driven Core Technology Support and implementation of changes in Controls, Processes, and Instrumentation to meet or exceed production requirements Complete Strip Down, Upgrade, Panel
• Fabrication, and PC Board level repairs for Control systems and three Sputtering machines to improve system Thin Films Deposition reliability and quality Upgrade of a manufacturing expansion from 600,000 to 1,000,000 parts per year by providing technical support, direction, installation, maintenance, and startup support of technologically advanced electrical, mechanical, robotic, hydraulic/pneumatic, and electronic systems & controls for a 17 - machine manufacturing line wif Sputtering, Snow Cleaning, Laser Etching/Marking, Welding, Weld Analysis, Wire Bonding, Oven Curing, SMT PCB Assembly, Hot &
• Ambient Calibration, Final Assembly, and Final Part Testing Design, Engineering, Installation, Repair, Maintenance, Startup, and Operation of Sputtering and PECVD machines, instrumentation, and processes. Maintained Chemical tank inventory and connection of chemical tanks to machines Designed, Engineered, Fabricated, Programmed, and Installed process control systems for Environmental Ovens and Chiller Controls

Confidential

Electronic Controls Technician

Responsibilities:

• Design, Engineering, Installation, PLC Programming, Repair, Fabrication, and Requisitioning the purchase of High Speed Packaging Machinery controls and systems to improve machine functionality, reliability, yield, quality, and operator ease of use Maintenance and optimization of Controls & Process to improve Safety, Quality, Production, and Revenue Provided trouble shooting, repair, maintenance, and programming support for 13 High Speed Punch Press Lining Machines, 4 Industrial Printing Machines, 5 Compression Lining Machines, 24 injection molding machines, and 1 CNC Lathe in a fast paced, production oriented industrial environment using Omron and Rockwell Automation/Allen Bradley PLCs Engineered, Fabricated, Installed and Programmed a new Pad Printing machine to support 3 pad printers wif Oriental Motor stepping motor motion control to index a 3 - up star wheel utilizing custom cam positioning for printer queue, start commands, and cycle finished report back Implemented Cam Cycle Controls for High Speed Punch Presses for Vision Inspection Camera Control, Reject Station Control, and Glue injection machine interfacing for part production rates to 1000 parts per minute, and provide
• Repair and Maintenance of A/C Environmental Controls Managed and Implemented the change in Hardware & Programming from mechanical cam fabrication control to Programmable Digital Electronic Rotary Encoders to replace Main Axis Physical Cam Axis Controls, resulting in high precision timing controls of all machine functions based on main axis position Increased production and lowered part losses utilizing Main Axis Programmable Digital Rotary Encoders on all production lines for Control of Web feeders, Glue Machine injectors, Vision System Camera Control, and Part Reject Station Control Upgraded
• Automated Box Fillers/Shifters from relay logic to Programmed PLC controls for 13 manufacturing lines to eliminate shipping box over/under filling using Omron PLCs Implemented networking of 13 manufacturing lines wif the plant IT network to provide accessibility to production floor production data
• Upgraded, replaced, and Reprogrammed PLC's and sensors for feed plate & hopper controls to eliminate feed plate & hopper over/under fil Upgraded and replaced the sensors for an upside-down cap sensing system to eliminate expensive punch and die crashes Implemented the change from mechanical cam fabrication control to Programmable Digital Electronic Rotary Encoders to replace Main Axis Physical Cam Axis Control, resulting in high precision timing controls of all machine functions based on main axis position Design, Engineer, Prototype, Fabricate, and Program Automation Process Systems and Control Panels Documented changes, upgrades, and new control systems designs & schematics in AutoCAD Trouble shoot system problems in electrical, electronic, and mechanical systems

Confidential

Instrumentation Technician

Responsibilities:

• Managed Projects and programmed HMI software for the installation and upgrade of SCADA control system, and designed county wide Proprietary HSQ Technology "Miser" OEM SCADA HMI Managed Project - Manatee County Water Treatment Plant Expansion control system from 44 MGD to 60 MGD, and upgraded and interfaced the new and existing plant controls into the new SCADA / DCS / RTU system, and Programmed OEM HMI Controls for the existing plant, expansion, and remote Pump Stations Developed, managed, installed, and implemented automated SCADA / DCS for County Wide Water System

  Maintained Water Treatment Plant Telemetry system, Radios, Modems, Antennae, Cabling, and Licensing Modified New RTU EPROM software for existing radio SCADA infrastructure and designed radio interface Replaced County Wide Mercury Well Transmitters wif solid state stainless steel diaphragm transmitters to eliminate the possibility of Mercury Contamination in the Public Water System Designed, Engineered, Installed, and Maintained Control system for multi-pump 1500 foot deep well pumping system wif monitoring well level system Designed, Engineered, and Implemented Lightning Protection

  Systems for Local & Remote Telemetry, Control, and Instrumentation Systems to greatly reduce downtime and losses from lightning and surges Upgraded and replaced old individual pneumatic filter operating controls to Electrical, Electronic, and Instrumentation controls, and integrated into the main Plant SCADA system wif an OEM HMI interface Installed, Implemented, and Programmed solar & electric powered watershed rainfall monitoring system to provide reservoir water inflow predicting in remote powerless locations Designed, Installed, Implemented, and Programmed the remote control SCADA system to regulate water pressures on Anna Maria Island and Longboat Key, Florida Designed, Engineered and installed Analog to BCD Remote water flow and totalization billing/monitoring and flow control systems to provide local BCD printing for accurate Billing Data logging for water consumption billing to Longboat

  Key and Sarasota County, Florida Wrote technical specifications for contract bids on computers, data communications equipment, instrumentation, repair & maintenance service contracts, and closed circuit TV Provided for technicians and operators in software, control theory, repairs, maintenance, and calibration and worked closely wif Plant Electrician Effectively used computer aided design/drafting applications to document plan and drawing changes Responsible for accurate data acquisition from process instrumentation to insure bulk product accuracies and balances for formal reports, billing of water sales to municipalities, and accurate water Budget Balance between Raw Water Intake, Plant Water Use, Production, Accurate watershed rainfall runoff monitoring, and Reservoir Inflow/Outflow & Flood Gate Position Calculated Outflow Service Repair and Maintenance