PROFESSIONAL EXPERIENCE

Confidential, Clearwater FL

Aerospace Quality/Sr. Engineer

Responsibilities:

• Participate and drive Honeywell Operating System activities related to process and product improvements, including the identification of opportunities for set up reductionproduction flow improvement, value stream mapping, visual factory implementation, and participate actively in continuous improvement activity.
• Possess an in - depth understanding of high-mix/low-volume manufacturing Experience with SMT assembly processes and requirements, including AS9100/9102; IPC-610; and J-STD-001.
• Develop, implement, maintain and improve methods, operation sequences, processes and applicable work instructions in the fabrication and testing of parts with a focus on e-factory execution and improvement.
• Knowledge performing full and partial FAI’s per AS9102
• Knowledge of Corrective Action and failure reporting processes
• Experience with document collection, hardware hierarchy, and specification reviews with customers.
• Ample knowledge of data collection and statistical techniques including ability to implement Statistical Process Control.
• Acquire and maintain data on factory performance in assigned work areas. Identify, analyze and extensive knowledge of Corrective Action to reduce labor, reporting processes scrap and reworkimprove yields, products flow, quality and reliability using scientific and statistical methods.
• Knowledgeable of Lean/Six Sigma principles and application methods
• Knowledge of continuous flow manufacturing using Lean techniques
• Experience with implementing Lean tools/methods (Standard work, 5S, cells, TPM, 1-piece flow, Set Up reduction, Poka Yoke)
• The ability to analyze data and make engineering decisions based on scientific analysis, which includes but is not limited to being proficient at DOE, DFMA, PFMEA, Kaizen, 5S, work instructionsvalue stream mapping, statistical data analysis, cycle time analysis, and root cause and corrective action. knowledge and experience performing full and partial FAI’s per AS9102.
• Experience with process improvement changes through Kaizen or other focused methods
• Familiarity with work standards and visual manufacturing instructions Strong skills with MS Office programs
• Experience working with MRP systems and inventory analysis
• Strong interpersonal skills and team building skills
• Ability to operate independently or as a team as the work dictates
• Develop, implement, maintain and improve methods, operation sequences, processes and applicable work instructions in the fabrication and testing of parts with a focus on e-factory execution • Provides oral and written reports on a weekly and monthly basis as required to describe project status and, identify potential problems areas and presents recommendations. Maintain records and reporting on analysis and improvement efforts.
• Team with customers and engineering to solve customer identified product Quality concerns.
• Ensure all internal manufacturing, development, supplier, and receiving inspection work instructions are correct to assure Program requirement and Quality Plan are meet.
• Provide daily and timely support to production teams in preventing and resolving manufacturing problems with timely communication to management on issues and resolutions. Support Customer in house with Customer PRE-CAP MIPs and Final MIPs.
• Create reports for Customers as OATK Orbital O3B, Orbital Star 2, JPL, Lockheed Martin, MS Sentinel, Galileo, Galileo OHB, Electra, Dart, Viper, etc.
• Act as the Program Interface for the Customer communicating Quality related issues to the program or Integrated Supply Chain Management.
• Interface with other functional groups as needed to assure Program requirements are meet.
• Participate in all Program meeting where Quality technical input is required (as needed - i.e.
• CCB, TRR, MRR, MRB, Rundown daily Program Meeting/status, OPS reviews, monthly auditsCustomer audits, internal and external audits, etc.)

Confidential, San Antonio, TX

Quality Systems Specialist

Responsibilities:

• NCM, CAR, RFA, CA, defects analysis, NCM, OWI, QADS, GAD system maintenance.
• Conduct SOOT's, CAR's, RFA's, AR's investigations and perform coding within NCM System on
• Commercial Airplanes. Participates in the investigation to determine root cause of nonconformance plans. Supports analysis to identify and evaluate the quality of products, operations and processes.
• Assists in review of proposals, contracts, regulatory, program and customer requirements to prepare
• Quality assurance plans and tests for hardware and software products.
• Maintain Quality directives, policies, processes, procedures and metrics to assure program, contractcustomer, regulatory requirements, international standards and working.
• Collect and verify data to support the identification of root cause routine problems.
• Assists with hardware, software and system level audits to determine compliance with QMS system standards, configuration assurance, related business, regulatory and Customer requirements.

Confidential, Reynosa, Tamaulipas

SMT Quality Engineer

Responsibilities:

• Resolve Quality issues at customer lines and Implement corrective actions at processes lines.
• Rework products as RMA 'S and Implement visual aids to improve Quality of product at manufacturing lines.
• Experience with SMT assembly processes and requirements, including AS9100/9102;
• IPC-610; and J-STD-001.
• Rework products as RMA 'S and Implement visual aids to improve Quality of product at manufacturing lines.
• Resolve Quality issues at different processes and manufacturing customer areas.
• Training people for processes lines, procedures on different areas, as rework.

Confidential, Reynosa, Tamaulipas

Quality Corporate Engineer

Responsibilities:

• Monitor all customers' warranty tracking systems and ensure early detection and reaction to any negative trend or spike.
• Obtain samples, perform the analysis and coordinate corrective actions with responsible plants for all field concerns.
• Update Share Point Warranty site and Attend Warranty review meeting s with Customers as necessary.
• Incorporate warranty lessons learned into new programs (AQP).
• Maintain warranty records and Support North America Plants on any Quality or Warranty issues as necessary (including coordination of sorts at warehouse).
• Report on periodic basis on Warranty performance and issues to management.
• Implement corrective actions at processes lines and Implement visual aid to improve the Quality products at manufacturing lines.
• Apply corrective actions, 8D, SP, FTQ, MCS, at manufacturing lines.
• Responsible for PPAP, Quality issues, customer complaint, answer PRR'S, C1, C2, all related to customer complaints including return material authorization reworks, etc.
• Responsible for the following areas: Incoming Inspection, Dock Audit, End forming, Quality
• Processes and rework at warehouse.
• Training people for processes lines, procedures on different areas, as rework.
• Full support to-resolve Quality issues with Supplier Quality Engineering. Warehouse Supervisor responsible for the following duties:
• Finish good reports, answer differences between FG and Plants.
• Warehouse maintenance, including forklifts, docks and building.
• Receiving and Shipping products, northbound, RMA, etc.
• Training people related with warehouse issues.

Manufacturing/Process Engineer

Confidential, Edinburg, TX

Responsibilities:

• MPM and deck screen printers.
• Hands on technical experience with SMT assembly processes and requirements, including
• AS9100/9102; IPC-610; and J-STD-001.
• Fuji CP II, CP IV, IP II, pick and place parts machines.
• Heller/reflow/cure convection oven and Process Engineer for Auto Insertion and Prep area including: Universal Dip machine, Dynapert VCD machine and conformal coating processes improvements.
• Development improve and updating manufacturing processes.
• Implement visual aid, manufacturing instructions and lay out.
• Time studies, line balancing, IPC 610 Standard.
• Process and manufacturing fixtures and tools designs.
• Implement visual aid to processes and manufacturing production lines.
• Resolve Quality issues during the processes and manufacturing lines. Electronics test equipment technician, lead technician personnel.
• Responsible for the troubleshooting and analyzing printed circuit boards from all production lines including: Analyzing and repair electronics test equipment as HMU, Vacuum test and electronic equipment
• Improve and implement electronics test equipment, as In-circuit test, Gen rad, HMU. Vacuum teste
• Testing and analyzing RMA's printed circuit boards, from customer.

Confidential, Houston, TX

Quality Technician

Responsibilities:

• Production lines and Power supplier auditing.
• Analyze and make a report of failures.
• Keep Production line running without LVPS failures.

Confidential, Houston, TX

Production Coordinator

Responsibilities:

• Daily production schedule and Tracking material in warehouse.
• Request material for production lines and Inventory and analysis of production lines.
• Daily delivery production report and material requesting report for manufacturing production.
• Maintain production and factory performance in assigned work areas. Identify, analyze and implement corrective actions to reduce labor, scrap and rework, improve yields, products flow.

Confidential, Reynosa, Tamps

Quality Engineer

Responsibilities:

• Resolve Quality issues at customer house and Implement corrective actions at processes lines
• Rework products as RMA'S and Implement visual aids to improve Quality of product at manufacturing lines.
• Ample knowledge of data collection and statistical techniques including ability to implement
• Statistical Process Control.
• Resolve Quality issues at different processes and manufacturing customer areas.
• Responsible for Quality Customer Test
• Familiarity with work standards and visual manufacturing instructions
• Knowledge of Corrective Action and failure reporting processes
• Provides oral and written reports on a weekly and monthly basis as required to describe project status identify potential problem areas and presents recommendations. Maintain records and reporting on analysis and improvement efforts
• The ability to analyze data and make engineering decisions, which includes but is not limited to being proficient at DOE, DFMA, PFMEA, 5S, work instructions, statistical data analysis, cycle time analysisand root cause and corrective action. knowledge and experience performing full and partial FAI’s

Confidential, Reynosa, Tamps

Technical Support Group Engineer

Responsibilities:

• Resolve and implement corrective actions at manufacturing and processes lines.
• Analyze problems during the processes and take corrective actions.
• Updating processes and manufacturing work instructions.
• Customer failures analysis, defects and rework as RMA'S.
• Electronic Test Equipment Technician responsible for the following duties:
• Maintenance of electronic test equipment as: stress tester and functional tester.
• Repair and calibration of electronic test equipment.
• Development of procedures for electronic test instructions for testing.
• Responsible for thru-hole area, test equipment and functional area.
• Responsible for Quality and Calibration equipment area.
• Resolve Quality issues at customer lines and Implement corrective actions at processes lines.