SUMMARY:

• I feel I am well respected as an upstanding, hard - working and ethical individual who can be counted on to get the job done and do it well.
• While my resume is detailed and comprehensive, it cannot fully demonstrate the manner in which I achieved success. My character and my work ethics can be evidenced in a personal meeting.

PROFESSIONAL EXPERIENCE:

Confidential

SubSea Engineer

Responsibilities:

• I was placed in a special Subsea Engineer group that consisted of less than 24 engineers to go on separate rigs and assist in special needs that couldn’t be accomplished with the usual personnel on board for either not having enough knowledge or the job needed to be completed in a short period of time. As a Subsea Engineer my role was to help maintain, observe, and to train the individuals on board the safest and correct way to work on all subsea equipment. I was responsible for assisting in preparing BOP for launching, from pressure testing to complete tear down and rebuild of any part on a BOP and locating all well information for set up of hydrostatic and surface pressures. Trained and assisted in maintaining high pressure unit to working specs, diverter panel, fluid reservoir unit and all surface equipment related to the BOP.
• Worked with Direct Riser Tensioners, Wireline Riser Tensioners, and Active Heave Compensator systems, maintain proper working specification and setting up the proper functionality of equipment depending on water current and riser angle and assist in any needs to ToolPusher and Driller for making jobs safer and more efficient. Ensure that all working APVs, standby APVs are in proper specs.
• Assist and prepare riser joints for rundown, ensured that all bolts, seals, sealing areas, buoyancy packets are in proper working conditions. Prepared all tools for proper torque of bolts on riser joints.
• Assisted subsea personnel on board to maintain choke and kill manifold, ensure that all valves are working correctly and perform any overhaul if needed and to assist driller in any situation when needed.
• Had meetings with Senior Subsea Engineers to assist in creating procedures that were more efficient and safe for tasks that were needed to be completed and for any testing that needed to be carried out.
• Maintained daily check list and report of all equipment while I was on the rig, ensuring all equipment had proper fluid/air pressures, ensure that no equipment had any evidence of damage which could cause drastic failure.
• Trained, assisted, and carried out high pressure testing of equipment and also to help personnel have a better understanding on how the job is supposed to be done by company standards.
• Worked with several software programs to assist personnel to keep equipment maintenance dates in order plus record of what was done in the database, and also programs which work orders are being saved and updated to perform daily, weekly and monthly tasks.
• Main goal was to help and keep Subsea personnel on each rig up to date with the new ways of maintaining equipment the proper way and assisting to get the job done in a faster and safer manner to keep down time at a minimum.

Confidential,

Carolina

SubSea Engineer

Responsibilities:

• As a Subsea Engineer my role is to maintain all subsea equipment.
• I am responsible for preparing BOP for launching, from pressure testing to complete tear down and rebuilt of any part on BOP and locating all well information for set up of hydrostatic and surface pressures. Maintain high pressure unit to working specs, diverter panel, fluid reservoir unit and all surface equipment related to BOP.
• MRT and CMC system, maintain proper working specification and setting up the proper functionality of equipment depending on water current and riser angle and to assisting any needs to driller for making job safer and more efficient. Ensure that all working APVs, standby APVs are in proper specs.
• Prepare riser joints for rundown, ensured that all bolts, seals, sealing areas, buoyancy packets are in proper working conditions. Prepared all tools for proper torque of bolts on riser joints.
• Maintain choke and kill manifold, ensure that all valves are working correctly and perform any overhaul if needed and to assist driller in any situation when needed.
• Responsible for creating procedures for tasks that are needed to be completed and for any testing that needs to be carried out.
• Carry out a daily check list and report of all equipment, ensuring all equipment has proper fluid/air pressures, ensure that no equipment has failure.
• Carry out testing periodically of all equipment.
• Working with AMOS, a program which work orders are being saved and updated to perform daily, weekly or monthly tasks. I also used to input any part order requisitions and updated what parts were in stock and which needed to be ordered.
• Use of proper steps to ensure task can be completed correctly and safely, insert a permit to work with JSA and carry out pre-work safety meetings with assistants.

Confidential, Houston, Tx

Lead BOP Specialist

Responsibilities:

• As a Lead Tester I was to make sure that all the equipment on the BOP Stack functioned correctly.
• I managed four employees. Any problems or issues that came upon during the FAT test (factory acceptance test) was my duty to trouble shoot and make it function correctly, from crossed functions, leaks, the wellhead connector, my job was to make sure that this equipment work perfectly.
• I worked with JDE Edwards a software program to find parts that I needed to rebuild the equipment.
• I mastered at reading schematic drawings, assembly drawings and understanding any form of procedures familiar to the process of building, functionality, and testing of any equipment.
• Assemble and breakdown, rebuild and replace all BOP Stacks components. Rebuild regulators, SPM valves, 1 1/2 - 2" ball valves, shear seals valves, shuttle valves, check valves, and re-ran tubing.
• I worked with MMI and QNX software
• Maintained HPU to its proper working configurations. Made sure that the glycol/water mixture was in its proper specs.

Confidential, Houston, Tx

Assembly Specialist

Responsibilities:

• Well-verse in the art of bending tubing and pipe fitting. Mastered assembly/flow schematics/blue print reading and building per drawing specification also carry out each job with safety and quality a top priority.
• Charge accumulator bottles to specs.
• Trained on proper torque base, on protocol and procedures of torque equipment (e.g., hytorc gun, J-Gun, various size torque wrenches)
• Proper trained on crimping Parker hoses and running cable trays
• License to operate many different types of heavy machinery; JLG lifts, scissor lifts, up to 45K forklifts, 30 ton to 250 ton cranes.