Network Analyst Resume
3.00/5 (Submit Your Rating)
SUMMARY
- Over Ten (10) years’ experience in Telecommunication Industry.
- Management of WAN Network Protocols (VPRN, VPLS, IP/MPLS, Frame Relay, PPP, OC3/OC12/OC48, T1/E1, DS0, GigE and Ethernet), Wireless technologies (WIMAX, Wi - Fi) and QoS.
- Experienced with GSM, CDMA2000-1X/EV-DO, LTE, UMTS/HSPA, WiMax and IP/MPLS Network.
- Knowledge of cisco IOS-XR operating system for network converging system
- Knowledge of SCADA (RTU, Supervisory station, and Communication infrastructure and Methods).
- Good knowledge of Computer Networks (OSI/Internet Protocol Stack, TCP/IP, LAN, WAN, WLAN, Mobile IP, MPLS), Routing Protocols (OSPF, BGP, EIGRP, RIP) and Access controlled list (ACL).
- Knowledge of SD-WAN (Software Define Networking) and Cisco ACI (Application Centric Infrastructure)
- Coordination of Engineering and construction activities in Oil & Gas and Telecommunication Industries.
- Management of Wireless Network Technologies (GSM, Fiber Optic Technology, Wi-Fi, WIMAX, UMTS)
- Experienced with Ericsson Mini Link TN, Harris True point, Alcatel MPR and Ceragon Microwave Radios.
- Configuration and Maintenance of Alcatel 7750 & 7450 routers, Juniper Routers, Cisco Switches and Routers, and Firewall & VPN Implementation. Knowledge of CWDM/DWDM and direct fibre to the Node.
- Knowledge of VoIP Networks and Protocols (SIP, SCCP, H.323, RTP, TCP, UDP)
- Knowledge of Verint (Witness) Workforce Management (WFM) and Viewer Application.
- Proficient in using of MS Word, Excel, Access, Project and Visio
- Good understanding of Call Recording and Quality Monitoring Solution (VoIP Environment)
PROFESSIONAL EXPERIENCE
Confidential
Network Analyst
Responsibilities:
- Implemented Networking technologies such as TCP/IP, MPLS, Frame Relay, Wireless Communication and Voice & Data Communication Technologies.
- Handled Implementation of cisco Application Centric Infrastructure -ACI (APIC, Spine and leaf switches), cisco next generation firewall (firepower).
- Handled the installation, configuration, and maintenance of Cisco Network devices, Switches (Catalyst 3500, 3600, 3700, 4500, 6500) and Routers (Cisco 7206, 3900, 3800, 2800, 2900, 1800, 1700)
- Implementing Cisco AAA, TACACS+, RADIUS, and cisco ASA Firewall.
- Implemented and configured network security on Cisco ASA with inside and outside interfaces
- Created Access control list to permit and deny access on the DMZ firewall and core firewall using cisco ASA
- Implemented site-to-site VPN tunnel through DMZ firewall using cisco ASA.
- Handled the configuration of F5 BIG-IP and Cisco ACE Load Balancer
- Configured GRE tunnel, VPN IPSEC tunnel (IKEV1 and IKEV2), and Remote Access with Cisco Easy VPN
- Implemented Network layer 3 Routing Protocols (OSPF, EIGRP & BGP) and layer 2 Switching protocol (VLAN, 802.1q & VTP) on Cisco network devices.
- Handled implementation, change management, and execution of testing methodologies.
- Implementation of DNS and DHCP and Orion Solarwinds
- Used ITSM and Confidential Tivoli ISM ticketing tool to open changes request
- Producing network utilization reports.
Confidential
Network Designer
Responsibilities:
- Designed IP/MPLS Network for the National Core transmission Network Implementation.
- Configured Alcatel 7750 & 7450 Routers, Juniper Ex-4200 & Ex-3200 Routers and Cisco switches and routers.
- Create VPLS (Layer 2 VPN) and VPRN (Layers 3 VPN) on Alcatel 7750 and 7450 Routers, bound SDP on the VPLS to create Tunnel between Provider Edge (PE) devices.
- Designed and implemented Telus Fiber-to-the-Home (FTTH) Network (GPON).
- Handled fiber splicing for very high speed internet access (VDSL) and 5HD IPTV transmission at FDH and NAP.
- Designed and Implemented fiber transmission path (CO, FDH, NAP) for broadband services (OSP).
- Provisioned broadband services for customer high speed internet access (HSIA), IPTV (1HD, 3HD, and 5HD services), pots and derived voice (ISP).
- Provisioned gateway modem, ONT and Wired and wireless digital set up boxes for IPTV and internet services.
- Implemented Broadband Network Gateway (BNG) using Aruba Access Point for customer CPE connectivity.
- Provisioned gateway modem, ONT and Wired and wireless digital set up boxes for IPTV and internet services.
- Implemented QoS, Q-in-Q, and VPN & firewall policy implementation.
- Designed IP/MPLS for the Multi-service-site, and created VPLS and VPRN for each service instance.
- Provisioned SAP ports to interface Customer Edge (CE) to Provider Edge (PE).
- Designed Wi-Fi network and integrated into LTE/HSPA Network for Converged Edge (CE).
- Handled CE Migration from OSPF Network to BGP (Border Gateway Protocol) Network.
- Configured VLAN on Cisco switches and Implemented Access controlled list (ACL) on Cisco routers.
- Used Alcatel 5620-SAM for network management and monitoring.
- Implemented policy for customer access to the BRAS server.
- Provisioned Alcatel MPR radio and Ericsson Mini-Link Radio for 2+0, 2+2, 1+1 configuration and XPIC.
- Build copper transmission path (CO, SAC, PED and DEMAC) from Line equipment, multiplex with DSLAM and split with pot splitter at the DEMAC for broadband services.
- Installation and repair of POTs, xDSL, IPTV over copper and fiber transmission, and Wi-Fi services.
- Terminated fiber, cat 5,6 and coaxial cable for broadband transmission and converged edge services.
- Monitored Wi-Fi services using Wi-Fi analyzer, and configured appropriate channel and power for better signal reception.
- Carried out DSL expert test, ASAP (copper) test, OTDR test, Broadband Loop and Service Testing (BLAST), and insight test to ensure clean transmission path.
- Carried out link bonding to provide high speed for converged edge services in areas where there is no fiber access.
Confidential
Project Coordinator
Responsibilities:
- Maintain consistency in the engineering deliverables following Thermon EHT Project Design Guidelines and project specific guidelines.
- Assist both the PM and the project controls personnel with real time package progressing
- Liaising with contractors, site managers, field operators and clients for effective implementation of project work.
- Developing and maintaining project Request for Change and Bill of Material logs.
- Coordinated customer requests through RFI process and handled changes through change management process.
- Review engineering documents (PI&D, Piping Isometrics, and Line List) to ensure length changes between bid and actual detail design are consistent.
- Review Engineering documents to ensure length changes between bid and actual detail design are consistent.
- Review changes between the unstamped isometrics and the stamped ones on two separate projects
Confidential
Field Network Management
Responsibilities:
- Configured Haris Truepoint radio, Ericsson Minilink transmission equipments, and Ceragon IP radios.
- Carried out RF testing, check handoffs and signal strength analysis using Qualipoc and TEMs, and interference analysis using spectrum analyser.
- Provisioned and upgraded Cisco 7604 switches and Cisco ME 3800 switch.
- Configured Cisco router interfaces and sub-interfaces for Wide Area Network (WAN) implementation.
- Implemented VLAN, QoS, and OSPF routing protocol.
- Configured and maintained new Ericsson DUW Node-B (RBS 6601).
- Performed MAC process (Move, Add, Changes) through change management process.
- Carried out Maintenance on Ericsson GSM BTS, Ericsson Node-B and Motorola WiMax BTS
- Performed Microwave commissioning, Software upgrade & maintenance on Haris OC3 Truepoint Radio, Ericson Minilink TN transmission equipments, and Ceragon IP radios.
- Handled Network conversion from TDM to IP based network.
- Configured Multiplexer WideBank28 for DS3 to DS1 conversion and Fujitsu flashwave for OC3to DS3.
- Sent weekly Report on work progress on the field to the Regional Manager.
Confidential
Network Implementation Supervisor/Project
Responsibilities:
- Coordinated the infrastructures Roll-out of the core and access for the Edmonton Wind Mobile IP Network.
- Involved in performance of Quality Control & Quality Assurance Management.
- Provisioned Microwave Radio for various configuration mode and hot standby mode (1+1, 2+0, 2+2 etc.).
- Developed and maintained project schedules based on the estimate analysis, the work breakdown structure, and regular productivity/progress updates.
- Carried out call testing (E911), handoffs, and coverage analysis of a base station.
- Implemented VLAN, QoS, and OSPF routing protocol.
- Ensured project deliverables are completed on schedule and on budget, as well as meets client quality standards.
- Sent weekly report of Deployment activities to the Regional Manger.
- Reviewed RFC 2544 and Microwave ATP test reports to ensure meet the acceptance requirements.
- Carried out site verification checklist to ensure every component in place before infrastructural deployment.
- Performed verification to ensure the deployed infrastructures meet the company requirements.
- Scheduled work activities to be carried out on the IP Network.