OBJECTIVE

• To obtain a Controls Engineer position in the field of engineering that will utilize my skills and experience

SUMMARY

• Designed LNG (liquid natural gas) pumping system to provide and communicate to locomotive tender car engine for Progressive Rail
• Designed an auto computer fill system for cylinders, tanks, and trucks for Red Ball, Air Liquide, and Lifegas
• Successfully designed automatic temperature - pressure filling and gas mixing system using PLC and HMI
• Successfully designed and installed the CareTaker system for Airgas using HMI/PLC base to print out the oxygen fill process data report that required by FDA
• Designed electrical control panels and MCC panel with PLC, HMI, and VFD for cryogenic pump systems
• Successfully improved EZ-Fill system to the new automatic fill control gas for Airgas
• Worked with a team to improve barrel lines plating systems by using HMI, improved heating controls for belt furnace, and improved bowl vibration systems with HMI and PLC controls
• Improved unloading conveyor for vibration systems by using actuator to replace motor drive
• Successfully designed and implemented a gas pump controller for gas stations
• Improved a saving electricity system for the high power supply panels for refinery factory

PROFESSIONAL EXPERIENCE

Confidential

Project Controls Engineer

Responsibilities:

• Support day to day issues in requirements, troubleshooting, technical support, and development of complex equipment controls and MES (Manufacturing Execution Systems) for Semi Auto Drum Brake Bench project, and Semi Auto Disc Brake Bench project.
• Provide electrical designs, programming, and drawing within applicable standards to build new and modify existing Driveline, Front Line, and Rear Line Assemblies.
• Responsible for changes to ladder logic and software including, but not limited to: Safety Systems, AB PLCs, PanelView HMIs, Ignition, and PC based logic.
• Program barcode scanner, badge reader, and torque tool controllers such as Atlas Copco, Stanley, Uryu, Arcadyne, and Sturtevant Richmont torque tool.
• Assist with defining MES/IGear/Aprisio solution architectures and develops detailed design specifications.
• Perform weekly updated project meeting with engineering team. Estimate, negotiate and maintain relations with vendors and subcontractors.

Confidential, Richburg, South Carolina

Electrical Engineer/Project Management

Responsibilities:

• Managed Maintenance Team and perform daily reports to Engineering and Maintenance Manager.
• Troubleshoot and edited AB PLC, VFD on Bead Winder, Bead Apex, and Wire Cutter.
• Provided support to Electricians for troubleshooting on Inner Liner, Sidewall, and Tread Line machines but not limited to DCS/PLC//HMI.
• Coordinated with PM Planner and Production Department to perform activities of preventive maintenances on all plant equipments.
• Improved Windup stations for Tread Line, Sidewall, and Inner Liner by using encoder instead of bar code scanner.
• Supervised equipment installation and perform pre-acceptance.
• Performed weekly update meeting with engineering personnel, including General Contractor.
• Estimated, negotiated and maintained relations with vendors and subcontractors.
• Maintain logs and supervise RFIs. Achieve RFQ to vendors and contractors.

Confidential

Electrical & Controls Engineer

Responsibilities:

• Managed the UL listed Electrical Shop and provide instruction to electricians to build panel as well as wiring
• Designed panel layout, assembly details, and develop new electrical control panels, pump skid, auto unattended pump PLC controlled panel, VFD (variable frequency drive) pump control panel, liquid hydrogen/nitrogen pump PLC controlled, ultraviolet control panel, cylinder polisher panel, liquid fill scale systems, heat rod panel as custom requested and provide documented test procedures for design verification to meet electrical codes NFPA.
• Programmed and edit ABB PLC, VFD and HMI, and Beckoff, Omron, RedLion, Allen Bradley PLC and HMI platform.
• Prepared of system layout drawings, and schematics by coordinating with engineering design, interpreting customer and functional requirements
• Developed and maintain the bills of materials for each electrical panel and estimate time for projects.
• Work with the vendors and other departments such as, sales, FAB shop, and Mechanical to develop cost effective, reliable, and easy to manufacture product
• Provided technical support to customers as well as perform service orders including travel to customer sites to resolve technical issues

Confidential

Electronics Maintenance Technician

Responsibilities:

• Installed new improved vibe panels for bowl vibration systems
• Edited Omron and Allen Bradley PLCs for the automatic plating system # 1, 2, and 3. Programmed Cutler Hammer VFD of vibrations, furnaces, and plating systems,
• Maintained and repaired electrical furnace systems and Troubleshoot pneumatics, hydraulics, mechanical and the automated electrical control systems
• Installed new equipments and repaired motors, VFD, HMI, computers, actuators, solenoid valves, magnet, de-magnet, encoders, inverters, power supplies, etc.
• Implemented preventative maintenance hydraulics, pneumatics, mechanical and electrical systems
• Ran electrical conduits for new installations, and repaired servos, liner scales, ball screws, support bearings, sandpiper pumps, spindles, gearboxes, and temperature controllers
• Performed preventative maintenance for waste treat system

Confidential

PLC Technician

Responsibilities:

• Edited Omron PLC for CNC and lathe machines: Tsugami, Tornes Bechler, Matsuura, H.Plus 300, Nakaguma TW-10
• Tested Omron PLC and its components. Performed the test procedures for CNC and lathe machines
• Maintained pneumatics, hydraulics, mechanical and electrical control systems of CNC and lathe machines