We provide IT Staff Augmentation Services!

Research And Development Resume

Long Beach, CA

SUMMARY

  • Performed first article inspection and final inspection of finished products.
  • Responsible to read and understand drawings, schematics, blueprints, build instructions and test procedures.
  • Initiated and completed non - confirming material reports to ensure appropriate disposal of nonconforming material and Ship.
  • Reviewed Device History (DHR) records for sign-off of completion of operation and accuracy.
  • Performed Modification, Testing, Troubleshooting and Calibration procedures on Transducer Test Fixtures for the NGVS production line.
  • Tested and troubleshot VGA, HDMI and S-Video, Tested, Install OS, Application and Repair Medical Device Computers
  • Tuned and tested handpieces, utilized high speed camera to measure wet-stroke displacement
  • Tested and troubleshot AC-AC, DC-DC, AC-DC converters PCB’s and power supplies.
  • Tested finished medical devices, read blue prints, integrated boards based on schematics.
  • Performed Safety Test on Constellation Systems, Pre-Ship which consist of visual, inspections of final product to ensure that products conform to all specifications, drawings and procedures.
  • Performed Installation Qualification, Operation Qualification and Performance Qualification (IQ/OQ/PQ) on testing equipment.
  • Identified and troubleshot potential production issues including manufacturing defects.
  • Conducted failure analysis and provided recommendations for corrective actions.
  • Has experience of operating specialized RF test instruments and equipment including Network Analyzers, Spectrum analyzers, Signal Generators, Power Meters, O -Scopes, Digital Multimeter
  • Hypot Tester, Safety Analyzers, Flowmeters and Digital Pressure Meters (DPM).
  • Utilized, Calipers and Micrometers
  • Functional Tested Laser, Assembled and tested Illuminators
  • General knowledge of manufacturing processes, materials and testing procedures.
  • Hands on experience with mechanical assembly and soldering.
  • Worked in a Lean manufacturing environment and practiced good manufacturing practices (GMP's).
  • Proficient with Microsoft Office, JDE Database, Windchill, Excel, LabVIEW and Python
  • Fluent in Spanish and English.

PROFESSIONAL EXPERIENCE

Confidential, Long Beach CA

Research and Development

Responsibilities:

  • Performed testing and troubleshooting on Hydrafacial Tower, Hydrafacial Allegro systems
  • Performed reliability testing and validation and verification on Hydrafacial Tower and Allegro systems
  • Performed root cause analysis on Single Board Computer (SBC) modules

Confidential

Research and Development

Responsibilities:

  • Performed inspection on 23, 25, 27 gage probes using a conventional microscope as wells Keyence Digital microscope
  • Utilized autoclave to sterilized Phaco and Centurions handpieces
  • Utilized Convection ovens, Autoclaves, Vulcan Furnace, Bransonic Ultrasonic cleaners for research
  • Utilized Miele Auto-wash to sterilized Phaco and Centurions handpieces
  • Performed preventive maintenance on Miele Auto-wash machine
  • Tested Phaco and Centurions handpieces using LabView
  • Performed IQ/OQ on software upgrades for the probe drivers
  • Performed reliability testing on new designs
  • Performed Verification Validation

Confidential

Engineering Technician

Responsibilities:

  • Performed inspection, testing, calibration, vibration testing, environmental testing and troubleshooting on different types of displays for the military such as 4”, 6.5”, 10.4”, 12.1”, 15”, 17” and 21”.
  • Inspected and performed wavelength measurements with a software in a dark room on different types of LED’s

Confidential

Engineering Technician

Responsibilities:

  • Performed torque to failure test on filling valves and flush valves according to established test protocols.
  • Performed life-cycle test on flush valves
  • Wrote laboratory reports
  • Provided comprehensive test reports and ensures technical accuracy of provided test data.
  • Communicated test results to appropriate personnel.
  • Followed protocol for storage of test reports on database so that data can be readily retrieved for evaluation and analysis.
  • I followed procedures and industry test standards.
  • Identified equipment issues to prevent capturing of invalid data.
  • Responsible for laboratory organization and cleanliness.

Confidential, Irvine CA

Quality Technician

Responsibilities:

  • Performed Document Control on Device History Files (DHF’s) and Check For Accuracy
  • Build test fixtures, Teste proportional valves, Pneumatics and Pumps.
  • Tested and troubleshot AC-AC, DC-DC, AC-DC converters PCB’s and power supplies.
  • Loaded Operation Systems and Application into the Host.
  • Experienced with ISO 13485, Performed first article inspection and final inspection of finished products.
  • Responsible for Pre-Test Constellation Systems with ATE, Constellation Burn-In Cycle, Constellation Post-Test with ATE.
  • Performed Safety Test on Constellation Systems, Pre-Ship which consist of visual, inspections of final product to ensure that products conform to all specifications, drawings and procedures.
  • Practiced good manufacturing practices (GMP's).
  • Reviewed Device History (DHR) records for sign-off of completion of operation and accuracy.
  • Initiated and completed non-confirming material reports to ensure appropriate disposal of nonconforming material and Ship.
  • NGVS- Utilized testing equipment such as Scope, DPM, Power Supplies, Data Acquisition Systems and Flowmeters.
  • Performed Pre-Test, Post-Test, troubleshooting on Constellation Systems, Pneumatics Module, Diathermy Module and Fluidics Module.
  • Performed Modification, Testing, Troubleshooting and Calibration procedures on Transducer Test Fixtures for the NGVS production line.
  • Assisted on the development of Tether Test Fixture, Burn-in Fixture, AC Power Fixture and wrote the Fixture Specification procedures.
  • Worked as a ESD coordinator and performed testing chairs, test benches, racks, foot-stools and wrist straps.
  • Research and ordered components from suppliers. I assist Test Engineering on Test Fixture development and Validation such as NGUV Probe Driver for the NGVS production.
  • Assisted Confidential &D regarding troubleshooting modules, Constellation systems and process issues.
  • Assisted QA with Test Fixture troubleshooting issues.

Confidential

Test Engineer

Responsibilities:

  • Built and tested cable harnesses, assembled and tested NG Probe Fixture.
  • Performed validation procedures on Infiniti Footswitch Tester.
  • Performed validation procedures on Infiniti Footswitch.
  • Assembled, tested and calibrated a Load Box using two different Accurus Power supplies.
  • Reversed engineer electrical schematics for Accurus power supply.
  • Upgraded and troubleshot Aqualase Engine Seal Test Fixture.
  • Assembled, upgraded and performed IQOQPQ on 15 Torsional DTF’s.
  • Troubleshot and repair G3 Cassette holder and control PCB’s.
  • Assembled an Infiniti ATE. I am currently working on a Footswitch Calibrator Tester Design.
  • Built 2 Laureate Cart Test/Burn-in Fixtures.

Confidential

Research and Development

Responsibilities:

  • Performed animal studies with a NearVision CK System.
  • Performed Installation Qualification, Operation Qualification and Performance Qualification (IQ/OQ/PQ) on testing equipment.
  • Wrote Laboratory reports.
  • Developed and performed preventive maintenance and calibration procedures for company's equipment.
  • Maintained Calibration Manager database.
  • Utilized testing such as Optical Comparator, Calipers, Microscopes and DMM's.

Hire Now