OBJECTIVE:

• I am seeking employment as an Electro - Mechanical Designer, in which my experiences as a Satellite Communication Equipment Repairer and System Administrator, and Sr. Electro-Mechanical Designer will be an asset to the employer and provide opportunities for advancement.

TECHNICAL SKILLS:

• AutoCAD
• Pro-E
• Pro- Cable
• Pro- harness
• Intralink v3.4
• Pro-Diagram
• Routed System Designer
• Oracle PDM
• Catia v5

PROFESSIONAL EXPERIENCE

SR. ELECTRICAL DESIGNER

Confidential, Mooresville, NC

Responsibilities:

• My primary was demonstrating that the newly implemented SOLIDWORKS ELECTRICAL cad software upset could be used to route electrical wires and bundles.Responsible to the electrical team manager, I used SOLIDWORKS to access the Company PDM system (CMPRO) to retrieve drawings that require review and/or change. Researched and reviewed drawings and 3D assembly models when developing new solidworks electrical assemblies and parts models and drawings. Retrieved component/assembly models from the product data management system and incorporated new changes.
• Released revised models to update component, sub-assembly, assembly, and kit drawings. Demonstrated understanding of detailed aircraft wire routing drawings, wire diagrams, and block diagrams. Created new drawings that met required standard documentation requirements in accordance with Company standards.
• Investigated drafting practices required to facilitate the creation, storage, and maintenance of commonly used components. Defined. Created product design data, including component drawings, assembly drawings, and installation drawings.
• I routinely Communicated with cross-functional departments to establish understanding of electrical and mechanical requirements.
• Provide basic to team members. MS OFFICE and other support software Are required daily.

SR. ELECTRICAL DESIGNER

Confidential, Duluth MN

Responsibilities:

• Individually responsible for using/creating and modifying schematics and harness bundle drawings to create CAD models of electrical harnesses. I use simplified represents to create and modify harnesses for a newly Designed jet airplane.
• Expert knowledge of windchill, CREO 2, CAPITAL Harness (CHS), MS OFFICE and other support software Are required daily.

SR. PACKAGING ENGINEER

Confidential, Sealy, TX

Responsibilities:

• At Confidential, my daily task involved integrating and testing of the Autonomous Mobility Appliqué System (AMAS), a multiplatform kit that integrates low-cost sensors and control systems onto
• Tactical vehicles to assist drivers or enable autonomous operation in convoys. As a designer Iam responsible for the design, documentation, and modification of prototype harnesses in production, test and evaluation environments.

SR. PACKAGING ENGINEER

Confidential, Sterling, VA

Responsibilities:

• I create installation, assembly, part, and detailed drawings, and complete electrical drawings of complex components and assemblies from notes, verbal instructions, and rough or detailed sketches.
• Studying the operation of systems to select electrical connectivity components which meet functional and operational requirements is required daily.
• I determine the optimum location, arrangement, and routing from a design, manufacturing, and service standpoint of electrical wire harness components. Daily tasks required expert knowledge and use of Pro-E, and PRO CABLE, WF 4 to model electrical harness systems and components, and create complex routing designs and layouts.

PROJECT ENGINEER

Confidential, Peoria, IL

Responsibilities:

• Responsibilities require the exercise of initiative, latitude and judgment, and the ability to design independently with only general technical direction. Design work requires individual creativity, application of advanced drafting techniques, and broad understanding of automotive manufacturing processes. Daily tasks include:
• Performed multiple, complex design assignments with minimum assistance and/or supervision.
• Investigate, analyze and make recommendations to improve design. Review and comply with specifications, and standards on assigned projects including layouts, arrangements, design, computations, and selection of material and components.
• Ensure accuracy, completeness and compliance with Company, customer, and industry standards and specifications to include ASME Y14.41, GD&T/ANSI Y14.5, CAN communications network and protocol
• Prepare freehand sketches of basic engineering concepts and design solutions from which layout and/or detail drawings can be made. Utilizes RSD, Pro-E, PRO CABLE, to model electrical harness systems and components, and create complex routing designs and layouts.
• Determines design characteristics and component configuration; investigates pertinent design factors such as, interchangeability; evaluates and resolves design deficiencies.
• I Prepare bills of materials, technical reports, correspondences, and project progress reports for review by appropriate management and engineering personnel.

SR. E/M PACKAGING PRO-E HARNESS DESIGNER

Confidential, Woodbridge, VA

Responsibilities:

• Responsible for revising all documentation and Pro Cable models of electrical assemblies and parts. Created Installation, assembly, harness, and part drawings, and models of on-car electrical assemblies, and communication electronics units’ cables, and wires.
• Checked mechanical assemblies, for technical completeness and company standards compliance using Pro- E WF3 and Intralink 3.4, and ORCAD. Additional duties were to research, and update electrical and mechanical drawings per ECNs. Knowledge of and the ability to use ASME Y14.41 and Mil-Std-100, GD&T/ANSI Y14.5, and Oracle CAN PLM Inquiry software was required daily.

SR. E/M PACKAGING PRO-E HARNESS DESIGNER

Confidential

Responsibilities:

• Individually responsible for using schematics and harness bundle drawings to create CAD models of electrical harnesses. I Design sheet metal parts, for packaging of electrical and mechanical components and assemblies.
• I created the installation documentation with drawings, pictures and instructions using Pro E WF3, MS Word, and other photo editing software. I use PRO-CABLE simplified represents to create and modify harnesses for long-haul trucks. Knowledge of Pro E WF3, and PRO INTRALINK 3.2 and other support database software were required daily.

SR. ELECTRO/MECHANICAL DESIGNER

Confidential, Griffin, GA

Responsibilities:

• Used the company's functional specification and interviewed the customer's senior electrical engineer to understand the customers' concept and design specification. I independently selected/designed, parts, and packaged, a low voltage power distribution system. Supervised drafters and modelers (outsourced) creating assemblies, Pro harness models and part drawings. Used Pro-e sheet metal to design enclosures, and mounting assemblies. On a daily basis
• I used Pro E WF3 to create sketches and drawing layouts and redlined drawing. I also contacted vendors and suppliers for technical information daily. I was responsible for scheduling design reviews and creating PowerPoint presentations. The ability to use the customers design tools and software to include RSD and PDM software (Team center) was required daily.

ELECTRO/MECHANICAL DESIGNER

Confidential, Hornell, NY

Responsibilities:

• I was responsible for designing all documentation for electrical assemblies including installation, assembly, harness and part drawings. Duties included selecting parts, and materials per customer and industry standards.
• Proofed and edited Test and Inspection procedures for on-car electrical assemblies, and communication electronics. I checked mechanical assemblies, for technical and company standards compliance using AutoCAD LT, and R14.
• Additional duties were to research, and update electrical and mechanical drawings per ECNs. I modified PRO-E 2KI2 models of rail car frame assemblies to generate design, installation, and parts specification drawings.
• Knowledge of, and the ability to use design tools and software to include company parts database software was required daily.

ELECTRO/MECHANICAL CAD DESIGNER

Confidential . Oriskany, NY

Responsibilities:

• Responsible for designing electrical harnesses, sheet metal parts, flat patterns and documenting installations with drawings and instructions using AutoCAD R2000.
• Additional duties were to research, update electrical and mechanical drawings per EICs. I modified PRO-E 2KI2 models of bus frame assemblies to generate design, installation, and parts specification drawings. Extensive parts searches required knowledge of Pro Intralink and other support databases.

ELECTRO/MECHANICAL CAD DESIGNER

Confidential, Wichita, KS

Responsibilities:

• Responsible for designing electrical harnesses, sheet metal parts, flat patterns and documenting installation with drawings and instructions using AutoCAD r2000. Additional duties were to update electrical and mechanical drawings per

ECRs.PROJECT ENGINEER

Confidential, Memphis, TN

Responsibilities:

• Responsible for manufacturing material handling equipment from purchase order to shipment. The ability to analyze RFQs, purchase stock parts, and select drive components was necessary. AutoCAD r12/14 drawing and data files were generated for downstream processes daily.
• The ability to manage multiple projects was also demonstrated.

ELECTRO-MECHANICAL DRAFTER/DESIGNER

Confidential, Conway, AR

Responsibilities:

• Duties were to design electrical and mechanical parts for commercial and school buses, Knowledge of automotive wiring harnesses and sheet metal parts was requested daily. The ability to use MS OFFICE and other software was also requested.

MECHANICAL DRAFTER/DESIGNER SHEET METAL CNC PROGRA

Confidential, Stone Mountain, GA

Responsibilities:

• Duties were to design and program sheet metal parts for industrial cabinets and enclosures. My primary duties also include walking down unit assemblies for correctness of modifications to design drawings.
• A working knowledge of piping assembly, electrical and mechanical drawing was necessary on a daily basis. I used AutoCAD R11/14 and Metal-soft's FABRIWIN to design and generate NC G code.

MECHANICAL DRAFTER/DESIGNER

Confidential, Atlanta, GA

Responsibilities:

• Duties were to update and create mechanical systems DWG's (AutoCAD r13) from existing design drawing and physically walk down ducts, piping, and unit locations, sizes, and material.

MECHANICAL DRAFTER/DESIGNER-SHEET METAL CNC PROGRAMMER

Confidential, Marietta, GA

Responsibilities:

• Duties were to repair 3D models and orthographic prints of sheet metal parts, received from Customers via the Internet, faxes, and/or E-mail. I used FabriVISION - The Flat Part Measurement & Digitizing scanner.
• FabriWIN was used to generate NC G code for punching, and cutting machines. If an order is taken, the model is unfolded to create flat pattern drawings. Orthographic prints are used to manually design flat patterns of parts.
• The ability to used sheet metal formulas for shrinkage and bent relief was required.

MECHANICAL DRAFTER/DESIGNER

Confidential, Peachtree, GA

Responsibilities:

• AutoCAD R l2 was used to design wastewater, soak, and recalculation tanks. Knowledge of welding symbols, sheet metal, and shop practices was needed. The design and modification of frames and supports structures was also necessary.

MECHANICAL DRAFTER

Confidential, Atlanta, GA

Responsibilities:

• Duties were to update and create mechanical systems DWGs from existing design drawing. Primarily, I converted CADAM drawing files to AutoCAD R14's format and standard.

SATELLITE NETWORK CONTROLLER

Confidential

Responsibilities:

• Provides technical assistance to subordinates stations in the operation and maintenance of satellite communication systems. Performed complex and multifaceted tasks associated with stressed and unstressed network operations.
• Supervised and performed alignment, control functions, and direct support maintenance on assigned communications equipment. Ensured backup equipment, spares, and repair parts are available to sustain system operations. Compiled system and network statistics for reports.