SUMMARY:

• Electronic Engineer with experience in mathematics, programming, Debugging, operating CAN CANOE CANALYZER and NEOVI, Matlab, Simulink, Mototunes, HIL, SW Validation, Rf / Lf communication, infotainment and mobile applications, Android Auto, Apple Carplay, data and networking, Scripting and programming, wireless communications,
• Microsoft office, reloading operating systems, building, analyzing, microscopic soldering SMT and through hole, and troubleshooting analog and digital circuitry.
• Strong team leader with ability to learn quickly and accomplish any task
• Proficient in ISO 26262, FMEA, DFMEA, FMEDA, ICD, FTA, and worst case analysis and root cause analysis
• Launched multiple Mechatronics modules for various OEM throughout whole process from mule to DV and warranty 5 years
• Developing and testing ECU reprogramming process.
• Proficient in automotive V process from system and architectural requirements creation to full validation verifying and satisfying.
• Responsibilities include reading wiring schematics to wire ECUs
• Worked with flashing and validating various modules and systems; PASE, EMC, BCM, TPMS, AHU, IPC, DSP, SCCM, APIM...
• Worked with multiple Tier 1 as well as multiple OEMs
• Fmea dfmea warranty and quality validation/ engineering
• Reloading Operating Systems and finding drivers to make new systems compatible
• Created procedures/specs for validation
• Built test/load boxes /benches /flash fixtures / hil modules
• Programming microcontrollers and debugging programs
• Scripting and coding in VBA, linux, bash, C, C++, I2C, SPI and various languages
• Programming PLC's, debugging software, and controlling motors
• Calculating and measuring resistance, current, capacitance, voltage, and inductance
• Creating and troubleshooting AM/FM/PM modulations to receive and transmit data through communications
• Team leader with ability to TEMPeffectively run teams of five or greater

TECHNICAL SKILLS

• Operating Microsoft Office; utilizing Microsoft Excel, Microsoft Power Point, and Microsoft Word, Vizio, Project, SharePoint
• Proficient in Doors, Borland, Silk Central, RTC, Jira, Mat lab, Simulink, SVN, PTC Integrity, Motohawk, PLM and change management SW
• Created test procedures, test specs, PowerPoint procedures, pivot table analysis
• Proficient with BT sniffers and GPS simulators, Frontline SW for BT analyzing BT protocols and stack, A2DP, HFP, PBAP, MAP, AVRCP phone functions
• Proficient in all CAN communication and programming DIDS PIDS creating interfaces and panels and analyzing messages with Linux, VBA, Intrepid, Vektor, and Bosch
• Proficient in various software operations
• Programming microcontrollers/ microprocessors in assembly, C++, and C languages
• Creating and Debugging programs using Pro View 32
• Programming PLC's using ladder logic to operate motors
• Debuggers CAN CANOE CANALYZERS

PROFESSIONAL EXPERIENCE

Independent Consulting

Confidential

Responsibilities:

• Independent Consulting for multiple NDA projects regarding clients requests
• Scripting and writing requirements in Doors and PTC Integrity
• Programming Linux devices for automation and data logging

Confidential, Rochestery Hills

Systems SW Validation Engineer

Responsibilities:

• Project software validation engineer responsible for development implementation and canoe configurations to test validate and implement all functionality of dcus from dtcs to Routine control to all validation of every release purely automated from task scripting in excel to parse into xml modules and vector VT systems cards fully automated with capl in canoe
• Scripting in various languages and coding and decoding SPI and I2C messages
• Responsible for developing and testing ECU reprogramming process
• Software and Mechatronics validation and troubleshooting and root cause analysis to the PCB level and schematics level.
• Responsibilities include reading wiring schematics to wire ECUs
• Read and understand blueprints, schematics, wiring diagrams
• Responsible for node creation, simulation setup, Tse or environment setup and complete automation and validation of Pcf file, parameters, cdd, uds diagnostic, can dbcs, lin ldf, jira issues, and full sweep of all functionality.

Confidential

Systems Engineer

Responsibilities:

• CAN Development Systems Engineer responsible for designing CAN database for European Taxi program as well as verifying all architecture and modules communication involving CAN or LIN.
• Responsible for developing and testing Mechatronics ECU reprogramming process
• Assembled, mount and integrate electronic equipment racks, cabinets and accessories for HIL testing of the vehicle Mechatronics ECU modules.
• Troubleshoot and diagnosed client vehicle concerns using vehicle schematics and electrical circuit diagrams
• Scripting in various languages and coding and decoding SPI and I2C messages
• Responsibilities include reading wiring schematics to wire ECUs
• Responsible for programming a WOODWARD controller using MATLAB, Simulink and Motohawk to receive decode and retransmit desired messages and payloads / IDs for manipulation of off the shelf modules used in the project as well as creating functions in MATLAB to achieve desired design needs due to limitations of modules used.
• Testing, Validating, Programming, Flashing and troubleshooting as well as harness creation and design for all modules and bus needs.

Confidential

Systems Infotainment Engineer

Responsibilities:

• Systems infotainment lead engineer responsible for managing a team of three on testing 911 assist, sync services, vhr, mobile apps, and other features of SYNC gen 1,1.1,2, and 3
• BT trace and log capturing and decoding using BT sniffers and GPS simulators, Frontline SW for BT analyzing BT protocols and stack, A2DP, HFP, PBAP, MAP, AVRCP phone functions
• · Scripting in various languages and coding and decoding SPI and I2C messages
• Responsible for Creating test cases, organizing over 50 phones multiple OS and multiple carriers, flashing, upgrading, creating CAN simulation as well as automation of test cases also system setup wire harnessing and basically a cradle to grave approach for all functionality.
• Debugging CAN, troubleshooting and capturing traces BT sniffer traces, Devlogs and documenting reproducing and fixing bugs / issues.
• Programming in Linux, VBA, creating scripts and macros for automation and testing QnX OS.
• Responsibilities include reading wiring schematics to wire ECUs
• Reprogram vehicle Mechatronics ECU and BCM due to repairs or update issuance.
• Verified circuit names for electrical systems and sub - systems in the schematics.
• Organizing schedules meetings and preparations needed to efficiently utilize all members of the team.
• DV / PV Validation programming chambers, power supplies and running various environmental testing at different voltages and temperatures to ensure module operation

Confidential

Infotainment validation engineer.

Responsibilities:

• Infotainment FORD AHU/ACM validation engineer responsible for creating developing proving test cases and documented recording and troubleshooting rtc issues at FORDS building 5 breadboards and in office benches and simulation using vector and intrepid CAN tools. Conduct software update capability of in-vehicle ECU's
• Troubleshoot and Design all the required circuit schematics
• BT trace and log capturing and decoding using BT sniffers and GPS simulators, Frontline SW for BT analyzing BT protocols and stack, A2DP, HFP, PBAP, MAP, AVRCP phone functions
• Responsibilities include reading wiring schematics to wire ECUs
• Neovi red/fire value can can case xl and vector1610 canoe simulation building panels using vehicle spy canalyzer canoe neovi engine and taking traces logs and decoding hexadecimal messages signals using motorala format.
• Building obd harnesses for hs hs2 hs3 and ms can at different baudrates 33k 125k and 500k single and dual wire. Scripting in various languages and coding and decoding SPI and I2C messages
• Communication with multiple Mechatronics modules sync apim bcm swc ipcs and multiple systems.Building breakout boxes boards and developing automated test sw boards utilizing just can messages

Confidential, Farmington Hills, MI

Electronic Test Engineer

Responsibilities:

• Calibrating, mapping, and troubleshooting FOBs, working with IGNMs and KINs in the RF lab to ensure the repeatability and functionality of all systems.
• Recording data using various Vector CAN tools and writing test procedures / reports to analyze and learn how to constantly enhance the product.
• Printed Wiring Board (PWB) assembly, requirements definition, detailed circuit analysis, schematics design, and component selection. Scripting in various languages and coding and decoding SPI and I2C messages
• Responsibilities include reading wiring schematics to wire ECUs
• Utilizing CANoe and other programs to communicate and simulate results.
• Creating HIL Mechatronics modules for algorithmic testing and working with Helmholtz, oscilloscopes, signal generators and load boxes to create an electromagnetic nT field at a carrier frequency of 125kHz to calibrate and ensure consistency of the X, Y, and Z axes. Purchasing and ordering materials and working with multiple groups of teams depending on the project at hand.
• DV / PV Validation programming chambers, power supplies and running various environmental testing at different voltages and temperatures to ensure module operation

Confidential, Warren, MI

Infotainment Sub-Systems Validation Engineer

Responsibilities:

• Preparing, executing, validating, and recording infotainment procedures to ensure repeatability and verifying operation of electronic sub-systems in vehicle simulations. Utilizing mobile applications to ensure performance and functionality of smartphones and applications with radios
• · BT trace and log capturing and decoding using BT sniffers and GPS simulators, Frontline SW for BT analyzing BT protocols and stack, A2DP, HFP, PBAP, MAP, AVRCP phone functions
• Responsibilities include reading wiring schematics to wire Mechatronics ECUs
• Performed all Troubleshooting, modification and repairs by blueprints and schematics.
• Vehicle Spy and Neo VI Fire to read/write; PIDS, CPIDS, DIDS, and numerous functional/physical messaging communicating over CAN, LIN, GMLAN, and multiple networks. Analyzing all hexadecimal communications from every module in a vehicle verifying proper functionality
• · Scripting in various languages and coding and decoding SPI and I2C messages
• Creating spreadsheets and recording documentation to further production ensuring repeatability of modules.

Confidential

Electronic Test Engineer

Responsibilities:

• Implementing, developing, calibrating, creating, and debugging controllers, Mechatronics modules and various components for automotive OEMs.
• Creating all harnesses and circuitry to allow communication from the ECU to the load box, and flash fixtures. Simulating vehicles to test for working functions.
• Microscopic soldering, replacing micros, ASICS, and various sensors (Oputina, Mesquite, TPM, and IMU). PV, DV, and Functional testing to validate operation.
• Responsibilities include reading wiring schematics to wire ECUs
• Flashing Safing and Main Micros verifying operation. Maintaining a full inventory of the lab and creating purchase requisitions to order parts from multiple distributers. Reading schematics, pin outs, and cad drawings to create various products.
• Creating spreadsheets and recording documentation to further production ensuring repeatability of modules· Scripting in various languages and coding and decoding SPI and I2C messages
• DV / PV Validation programming chambers, power supplies and running various environmental testing at different voltages and temperatures to ensure module operation

Confidential

EMC Test Engineer

Responsibilities:

• Working with RF generators, Tem Cells, Anechoic chambers, power amplifiers, electrostatic discharge, voltage and current probes, and various antennas, to check for electromagnetic compatibility, susceptibility, and immunity in infotainment systems and products.
• Troubleshoot and diagnosed client vehicle concerns using vehicle schematics and electrical circuit diagrams.
• Responsibilities include reading wiring schematics to wire Mechatronics ECUs
• Using opto-electronics to communicate over CAN, and LAN networks.
• Using audio analyzers, power supplies, and spectrum analyzers to measure and document trace averages and noise levels from 500 KHz to 20GHz bands. Setting up amplifiers, head units, and extension boxes, using GPS, Bluetooth, and USB capabilities to simulate in vehicle use· Scripting in various languages and coding and decoding SPI and I2C messages
• GFG Instrumentation, Ann Arbor, MI Short term contract August 2010 - December 2010 Electronic Service Technician,
• Servicing, troubleshooting, repairing gas detection monitors used in hospitals, military, and various businesses.
• Replacing circuitry surface mount and through hole soldering, updating firmware and EEPROM, zeroing and calibrating monitors to desired PPM levels