SUMMARY:

• Seeking employment as a Network Engineer with 10 years of experience in network, desktop, infrastructure design and installation.
• Dickinson ND rail terminal M&A project: As a member of a merger and acquisition team, I installed and WAN hardware to include cellular router/WAN router, LAN switches. I configured a wireless bridges system for teh separate process control network.
• Firewall installations and configuration for Western Refining. I configured and installed firewalls to support business access to teh Internet. I also configured segmentations firewalls for refineries and process control networks.
• Campus core switch upgrade for Western Refining Tempe AZ datacenter and main office. As lead engineer I worked with a team to replace Cisco 6500 switches with L3 Nexus 9K switches.
• North Pole AK M&A project. As a member of a team dat replaced end of life routers and switches and wireless access points. Besides replacing hardware, I configured Cisco ISE for WIFI, implemented
• DMVPN for Internet WAN.
• Routers and switches for Marathon Petroleum pipeline network. As lead engineer, I determined hardware requirements, ordered VSAT connectivity with Hughes and Verizon, activated Cellular service with Verizon. LAN switches and routers were also configured, shipped. I remotely supported teh installation.
• I was teh lead network engineer for City of Phoenix network upgrade. I designed a campus network to replacing an ageing ATM system (LS1010) system with L3 core switches.
• LAN for California Air National Guard: during deployments I configured teh WAN router and installed field LAN switches.
• Switch replacement for General Dynamics Scottsdale, AZ.: As lead engineer I designed and implemented teh replacement of ageing network equipment

PROFESSIONAL EXPERIENCE

Network Engineer

Confidential

Responsibilities:

• Configured and coordinated teh installation of Cambium microwave radio bridge systems.
• Support industrial networks: SCADA and Process Control.
• Support teh business WAN which is a CenturyLink core with BGP.
• Wireless technologies: Wireless LAN Controller, light - weight APs and autonomous APs.
• Implemented employee Wi-Fi with digital certificates.
• LAN to LAN IPSEC VPN with business partners and remote office locations. Remote office connectionsare being converted from pre-shared-key to PKI.
• Developed and implemented WAN QoS to include marking and queuing based on DSCP values.
• Implemented Solarwinds for network performance monitoring and configuration management.
• Configuration of Cisco Secure ACS and ISE (TACACS and Radius) for network equipment access andremote wireless autantication.
• MPLS conversion of enterprise network from Frame-relay. Include BGP4 implementation and routeredistribution.
• Cisco ASA firewalls: configuration for access control lists, address translations (NAT and PAT),Sourcefire.
• Remote access IPSEC VPN using Cisco Client and Cisco ASA
• Cisco Call manager and Unity admin.
• Supported Tempe core switch upgrades. Replacing 6500 chassis with Cisco Nexus 9K switches.

Senior Network Engineer

Confidential, Tempe, AZ

Responsibilities:

• Projects for business and government entities in Tucson, Phoenix, Seattle WA, Lancaster TX:
• Implemented NMS tools including CiscoWorks LMS and Solarwinds for various customers
• Configuration and troubleshooting of L2L VPNs for customers
• For multiple customers: designed LAN networks and installed Cisco 6500 switches with EIGRP routing,
• Ethernet trunks, Port aggregation
• LAN re-designs and switch replacement/deployments

Network Engineer

Confidential - Tempe, AZ

Responsibilities:

• Frame Relay link analysis using SNMP tools
• Overseeing teh Implementation of a new Network Management tool: Info Vista
• Developing new security Architectures such as Business to Business VPN
• Analysis of network latency problems using sniffer captures

Consultant

Confidential, Sacramento, CA

Responsibilities:

• Implemented Cisco Network Intrusion Detection. IDSM blades and 4250 Appliance Sensors with IDSManager
• Network troubleshooting to include IPX SAP and routing, IP routing, and Firewall issues.
• Used Concord Network Health to analyze LAN and WAN issues
• Coordinated with California Health and Human Services Data Center to resolve routing, LAN and WANproblems
• Installed and configured a Linux server with MRTG network monitoring tool to baseline network usage.
• WAN and critical backbone link usage analysis
• OSPF routing protocol optimization
• Equipment and link Redundancy Analysis
• Developed Unix shell scripts to analyze proxy webserver logs.

Network Engineer / Consultant

Confidential, Sacramento, CA

Responsibilities:

• Troubleshooting and maintained a network with 900 plus Cisco routers
• Used HP Openview in analyzing SNMP traps
• Concord Network Health: Used to analyze links for usage and errors
• CiscoWorks 2000
• Frame-Relay link troubleshooting: (LMI, PVC status)
• Data Link Switching (DLSw): for IBM protocols
• Remote Source Route Bridging (RSRB): for IBM protocols
• IPX (EIGRP, RIP, SAPs)
• IP Routing (EIGRP, RIP)
• Appletalk routing (EIGRP, RTMP)
• Developed shell scripts to manage Cisco devices
• Trained CA state personnel on network troubleshooting and proactive monitoring
• Marshall Hospital (Placerville, CA)
• Installed and configured a Cisco firewalls with IPSEC VPN support
• Configured Cisco VPN clients for IPSEC and PPTP VPN
• Longs Drugs (Walnut Creek, CA)
• Installed and configured CiscoWorks 2000
• Imported information for over 2000 devices into CiscoWorks including wireless networking devices
• Trained Longs Drugs Network Operations personnel on using CiscoWorks 2000
• Waste Connections (Folsom, CA)
• Installed and configured a Cisco firewall to secure Internet access
• City of Concord (Concord, CA)
• Converted city's network from public addressing to network 10 to accommodate ISP change
• Installed and configured DNS servers
• Designed and configured a Multi-layered-Switched network including Cisco 6006 with MSFC, Token Ring
• Designed and implemented access policies through PIX 515 firewall
• California Department of Motor Vehicles: Sacramento, CA
• Installed and configured Cisco 6500 Multi-Layer switches
• Designed and implemented IP and AppleTalk routing network
• Converted SNA transport from RSRB to DLSw
• Trained DMV personnel on troubleshooting techniques for DLSw and bridging
• Quest Media (North Highlands, CA)
• Installed and configured Linux DHCP and DNS servers
• On-call support for managed services group to include PIX, routing, VPN troubleshooting.
• Moved teh Internet connection to a new ISP. dis included firewall changes, turning up a T1 Link, routerchanges, and DNS Server configuration changes.
• and repair.

TECHNICAL SKILLS

• Routers, Layer - Three Switches and Associated Technologies
• Policy Based Routing
• HSRP and HSRP influenced by IPSLA and/or interface link-status
• QoS marking and policing VPN and Security Technologies
• Dynamic Multipoint VPN (DMVPN)
• LAN to LAN IPSEC VPNs using Cisco routers and ASA firewalls
• Cisco ASA firewall configuration for NAT, PAT, access-lists, DMZs
• Autantication Servers: TACACS+ and Radius Wireless Networking
• Lightweight access points and autonomous access points
• RADIUS based autantication with Cisco ACS and Cisco ISE
• Industrial radios such as GE MDS iNet 900
• LAN extension with Cambium and Cisco bridges LAN Technologies
• Multi Mode and Single Mode fiber interfaces (SFP and GBIC)
• Port Channel
• VLANs / Trunking protocols: ISL and 802.1q
• Spanning Tree
• DHCP snooping / Dynamic ARP Inspection
• Portfast / BPDU Guard / Root Guard
• PACL / VACL
• Cisco Catalyst, Nexus and industrial platforms Network Management Tools and Technologies
• Automated Configuration Management: NCM
• Performance Monitor: NPM
• IP Address Manager: IPAM
• Topology Mapper: NTM
• Cisco NetFlow: NTA
• Wireshark Documentation