SUMMARY

• Having 10 years of combined experience in Embedded Systems Development & Verification & Validation, FD preparing, Matlab Model based Designing and Modeling & testing of Body Control Module features for Tata cars & GM cars and CAR infotainment systems (HMI, Tuner (DAB, XM,HD, FM,AM etc.) - Audio validation using CAN&LIN protocols (Automotive domain), Analog and Digital I/O cards Hardware testing (PCB cards with multilayer) with X86 platform, Firmware testing (Drivers Verification testing).
• Having extensive experience on MATLAB2010b with RTW, Microsoft Visio2007, BCM Module’s, Dspace simulator, Test Setup- ECU’s, Simulators, RFA Keyfobs, Immo Coils, Receiver, Mixed Signal Oscilloscope, Diagnostic tester tool with K-Line interface, CAN protocol.
• Having Very Good experience in Embedded tools like Tornado Development tool, CRO, Signal generator, Pulse generator, PCIe, SATA, JTAG Emulator, Trace32, Canoe, Canalyzer, CAN Card, WINKFP, EESE, CBD, ACAL, Playable, Vehicle Spy, RF Receiver, Programmer Development system, Dspace Simulators(HIL models), AUTOSAR, and Pyscheduler.
• Having very good experience on writing Python (using Plyable tool) and UNIX shell scripts.
• Having experience on server platform validation and DVT testing on UNIX/Linux environment.
• Having good experience on Labview test stand and Catia V5 drafting for Electrical diagrams.
• Experience in CAN, KWP2K & TCP/IP protocols and CAPL scripting by using TMM automation tool.
• Having very good experience into Matlab Modeling + MIL test cases preparation + Unit testing + MIL testing + Auto code generation with RTW tool + SIL testing of Lock Control and Lights subsystems.
• Having extensive experience on Interfacing NeoVI tool between CPU and BCM ECU for sending and receiving CAN&LIN Protocol messages Signals.
• Having very good experience on Embedded Verification and Validation (Black box type testing) in HIL(Hardware-In-Loop) testing by using Dspace simulator(DSPACE control desk) for BCM subsystems
• Expert in Product Validation and Functionality Testing of real-time embedded systems and Strong experience on testing processes and involved in all phases of testing life cycle.
• Having experience on National Instrument MineReady software for RDS testing and noledge of Cluster validation.
• Strong exposure to preparation of Requirement Analysis, Test scenario, Test strategy, Test planning, Test Procedure (Test Cases), Execution and Test Reports.
• Proficient in execution of PCB Hardware & software test scenarios of Analog and Digital I/O cards by using ‘C’ Language and understanding of embedded processor architecture & Flash memorys.
• Having experience on physical design verification for CMOS and STA and as well on functional verification of Hardware PCB Boards with component level also and post silicon validation..
• Experience on these Defect tracking tools Rational Clear Quest, Change Synergy & CMVC and management version control tool Rational Clear Case, CM Synergy and DOORS9.2.
• Having experience on UML RKE charts preparation for CAR modeling using Visio Tool.
• Having very good experience on Block box and Functional testing of regression testing, Sanity testing and diagnostics testing.
• Having extensive experience on Firmware testing using IBM tools, UNIX shell scripting, Board bring-up modules and good communication, documentation,leadership, problem solving skills.
• Having very good experience on Hardware & software testing using 8051 Microcontroller, PCI Bus, Device Drivers, RS-232 serial device and ‘C’ language.
• Hands on experience on stress testing, stability testing and reliability testing.
• Hands on experience on lab equipment’s like Oscilloscope, Logic Analyzer, Signal Generator, Volt meters and Digital power meters.
• Having very good experience on writing and executing teh automation scripts using HIL( Contains DSpace Simulator, NeoVI tool, ECU, Pyscheduler, ACAL, Programmer Development system tool).
• Having experience on Matlab Modeling of Lightings and Lock control subsystems.
• Having experience on field issues debugging using Nec-Minicube Emulators.
• Having experience on diagnostic validation using CAN protocol and other tools like (EDIABUS, EESE).
• Knowledge on Wireless domain 802.11 WLAN chips, HTML, Squish and Junit.

TECHNICAL SKILLS

Languages: C, C++

Design & Development Methodologies: V-Model, SDLC, UML, and Model Based DesigningRTOSVxWorks5.4

Development Tools: Tornado2.0, CSPtool, CMVC, HMCGUI, TMM, CANoe,Rational Tool(CC and CQ), EDIABAS tool32, WINKFP tool, Diagnostic tools, BCM GUI, Matlab2011b+RTW+V&V, Visio2007, Codewarrior, Microsoft Visual Studio(VC++ compiler), Junit, Squish tool, AUTOSAR

Simulators: Dspace, Pspice, Orcad, CRO, Signal Generator, JTAG Emulator, Mixed Signal Oscilloscope, NEC-MiniCube emulator

Version Control Tools: SVN, Clear case, Clear Quest, CM Synergy, Change Synergy and CMVC

Testing: HIL, MIL, SIL, Manual and Automation

Operating systems: Microsoft Windows 95/98/NT/2000/XP, Unix\Linux

Protocols: TCP/IP, CAN, KWP2000, GGDS, LIN, RS-232, SPI, I2C, USB, PCIe

Scripting: Unix Shell, Python, CAPL, HTML5

PROFESSIONAL EXPERIENCE

Confidential

HMI Development & Validation/QA

Responsibilities:

• Involving into requirement analysis and preparing specification & design documents.
• Involving into Audio features like RF amplifier, HMI, Tuner etc with Entertainment System, USB, Bluetooth, Navigation & Phone module Testing for vehicle systems.
• Hands on exp on developing & executing functional test cases for writing functional testing and Hardware bench level testing and test plans.
• Involved into HMI & Tuner automation in Python scripts and complete functional testing of each feature and debug software and complete System Validation
• Involved into rootcause analysis using Nec-Mini cube Emulator with S/W and H/W design teams.
• Interfacing Canoe tool Head Unit ECU for sending and receiving CAN Protocol messages & Signals.
• Involved into teh diagnostic validation using Diagnostics tool.
• Involved in Block box and Functional testing of regression testing, Sanity testing and configuration of test beds and diagnostics testing.
• For management version control uploading documents into DOORS tool.
• Logging Defects by using RTC tool.
• Involved into writing teh Python scripts by using Plyable tool and Test Builder
• Writing Test plan, Test cases, Test results, Defect Log sheet, and Impact analysis and summary reports using their own templates.
• Able to understand circuit theory and ability to read hardware schematics.
• Hands on experience on lab equipment’s like Oscilloscope, Logic Analyzer, Signal Generator, Volt meters, Bus Analyzers and Digital power meters.
• Providing teh necessary diagnostic information on teh found bugs to teh development team

Environment: Radios, Blutooth, Phone, Entertainment System, Test Setup- ECU’s, Simulators, Mixed Signal Oscilloscope, Diagnostic tester tool with K-Line interface, CAN protocol, PyScheduler, Plyable, Programmer Development system tool(Flashing purpose), C language, Nec-Mini Emulator.

Confidential

Project Leader

Responsibilities:

• Involved in requirement analysis and complete development.
• Involved into preparing teh Functional description and Model Based Designing of LockControl BCM feature
• Involved into Matlab Modeling(programming) of Lightings and Lock control subsystems
• Hands on experience Visio tool for drawing teh flowcharts
• Hands on experience on modification of ‘C’ code.
• Hands on exp on writing MIL test cases and test procedures for Lock Control and Lights subsystems
• Involving into Matlab Modeling + Unit testing + MIL testing + Auto code generation(‘C’) with RTW + SIL testing of complete functional testing of Lock Control subsystem.
• Involving in reviews like Peer, Internal, quality and External and process related things.
• Involved in BCM Validation HIL testing by using Dspace simulators and EMC/EMI compliance testing.
• Interfacing NeoVI tool between CPU and BCM ECU for sending and receiving CAN&LIN Protocol messages Signals.
• Understanding of circuit schematics and hardware datasheets.
• Involved into teh diagnostic validation using VehicleSpy tool.
• For management version control uploading documents into SVN tool.
• Writing Test plan, Test cases, Test results, Defect Log sheet, and Impact analysis and summary reports using their own templates.
• Providing teh necessary diagnostic information on teh found bugs to teh development team
• Involved into management activities like preparing all teh project related documents and communicating with process team, quality team and clients.
• Having experience into regression testing, Sanity testing and configuration of test beds and diagnostics testing.
• Hands on experience on lab equipment’s like Oscilloscope, Logic Analyzer, Signal Generator, Volt meters, Bus Analyzers and Digital power meters.
• Able to understand circuit theory and ability to read hardware schematics.
• Hands on Exp importing and exporting project documents into DOORS9.2
• Involving in issues discussion with Customer and prepared teh project related documents

Environment: MATLAB2010b&2012b with RTW, JTAG, Microsoft Visio2007, BCM Module’s, Dspace simulator, Test Setup- ECU’s, Simulators, RFA Keyfobs, Immo Coils, Receiver, Mixed Signal Oscilloscope, Diagnostic tester tool with K-Line interface, CAN protocol.

Confidential

Technical Lead

Responsibilities:

• Involved in BCM Validation HIL testing by using Dspace simulators..
• Interfacing NeoVI tool between CPU and BCM ECU for sending and receiving CAN&LIN Protocol messages&Signals.
• Involved into teh diagnostic validation (Block box and Functional testing) using VehicleSpy tool.
• For management version control uploading documents into CM Cynergy tool.
• Logging Defects by using Change Synergy tool.
• To run teh automation scripts using HIL( Contains DSpace Simulator, NeoVI tool, ECU, Pyscheduler, ACAL, Programmer Development system tool)
• Involved into writing teh Python scripts by using Plyable tool.
• Writing Test plan, Test cases, Test results, Defect Log sheet, and Impact analysis and summary reports using their own templates.
• Understanding of circuit schematics and hardware datasheets.
• Experience on EMI/EMC compliance testing.
• Hands on experience on Labview teststand.
• Involved into debug teh field issues by using Nec-Minicube Emulators
• Interfacing BCM module and Test Reg by using Test harness connector and bench level component level testing.
• Having experience into regression testing, Sanity testing and configuration of test beds and diagnostics testing.
• Hands on experience on lab equipment’s like Oscilloscope, Logic Analyzer, Signal Generator, Volt meters, Bus Analyzers and Digital power meters.
• Involved into RF lab test equipment.
• Able to understand circuit theory and ability to read hardware schematics.
• Following AUTOSAR rules
• Providing teh necessary diagnostic information on teh found bugs to teh development team

Environment: BCM Module’s(Bosch and Conti), Dspace simulator, Test Setup- ECU’s, Simulators, RFA Keyfobs, Immo Coils, Receiver, Mixed Signal Oscilloscope, Diagnostic tester tool with K-Line interface, Dspace simulators, Can&LIN protocol, NeoVI, ACAL, BCM-GUI, PyScheduler, Plyable, VehicleSpy, Programmer Development system tool(Flashing purpose)

Confidential

Sr. Validation Engg

Responsibilities:

• Involved in Audio Validation (Block box and Functional testing) and Hardware bench level testing with video.
• Interfacing CANoe tool between CPU and Radio for sending and receiving CAN Protocol messages.
• Involving into testing of Radio features with bluetooth, phone and entertainment system modules.
• Involved into teh diagnostic validation using CAN protocol and some tools(EDIABUS, EESE).
• For management version control uploading documents into Rational Clear Case tool.
• Logging Defects by using rational clear quest tool.
• Hands on experience modification of ‘C’ code.
• To run teh automation scripts using TMM tool and CAPL scripts
• Writing Test plan, Test cases, Test results, Defect Log sheet, and Impact analysis and summary reports using their own templates.
• Having experience into regression testing, Sanity testing and configuration of test beds and diagnostics testing.
• Participated into teh Project Management activities for these programs
• Providing teh necessary diagnostic information on teh found bugs to teh development team
• Visited teh Austin City at Texas, USA and coordinated teh India team for initial level testing.
• Performed a Firmware testing using IBM tools, UNIX shell scripting, Board bring-up Hardware modules.
• Updated teh Builds on IBM servers using WebSM (GUI) tool.
• Having exp into Linux platform level testing for IBM servers.
• Having experience on server platform validation and Drivers verification testing.
• Performing regression and integration testing and GUI testing.
• Updating test cases by using Csptool. and Debugging by using CMVC tool.

Environment: Csptool, CMVC, WebSm, UNIX, Shell scripting, Power PC, Open firmware, PCB Modules, ARM53CPU.

Confidential

Device Drivers Development and Testing

Responsibilities:

• Less contribution in Developing teh code by using ‘C’ language.
• Testing, & Debugging using 8051 Microcontroller Family Based Modules.
• Involved in unit testing and JTAG emulator testing.
• Involved in hardware PCB boards testing of Analog and Digital I/O cards using CRO, signal generator, pulse generator and Component level testing and silicon validation.
• Hands on experience on lab equipment’s like Oscilloscope, Logic Analyzer, Signal Generator, Volt meters and Digital power meters.
• Understanding of circuit schematics and hardware datasheets.
• Developing teh code by using ‘C’ language using VxWorks and Tornado tool.
• Testing, & Debugging using 8051 Microcontroller Family Based Modules.
• Performing a mother board testing using PCI bus and Post silicon validation.
• Involved in testing of Device Driver program to interact with teh Hardware module through parallel port.
• Involved in PCB Board level testing, unit testing and system testing and component level testing.
• Performing a tests using RS-232 serial communication device.
• Hands on experience on lab equipment’s like Oscilloscope, Logic Analyzer, Signal Generator, Volt meters and Digital power meters.
• Understanding of circuit schematics and hardware datasheets.

Environment: C, VxWorks5.4, Tornado Tool, 8051 ALP, X86 platform, 8051 microcontroller, PCB Modules (Analog & Digital I/O cards), RS232 device, CRO, JTAG emulator, PCIe, VFD, TCP/IP Protocol, BSP.