OBJECTIVE

• Seeking a position as an Electronics Engineer in the Technology field where I can utilize my skills and experiences.

PROFESSIONAL EXPERIENCE

Confidential

Independent contractor

Responsibilities:

• Debug, fix electronics systems on customers
• Setup network printers and install network systems and wireless security systems in many sites
• Install cash registers in many different POS

Confidential

Hardware Test Engineer

Responsibilities:

• Hardware debug, testing switches (NC24, 72, 96)
• Bring up switches systems and routers
• Rework and take measurement for many modules
• Setup networks and VLans on different types of switches
• Used python, linux, TCL etc..
• Hardware debug, test and rework memory module
• Fine pitch rework and eco support
• Experienced using high end thermal chamber and mechanical testing
• Supported Wireless and tablet teams for bring up and testing
• Tested and debug wireless devices using scripts in windows and linux environment
• Tested 1Ghz, 10Ghz nic cards in linux setting using traffic generator to monitor data
• Built and fix different types of electronics modules supporting server base station
• Worked closely investigating thermal issues related to server base station
• Eco upgrade and firmware load in many settings
• Bring up and testing SoCs, server boards, windows tablets and many other systems
• Tested and troubleshoot WLAN Physical layer (PHY)
• Tested in Linux, Unix, Python and TCL.

Confidential

Technical support engineer

Responsibilities:

• International and US Support and setup network related issues
• Troubleshoot, debug software used in library for universities and counties
• Support servers like Sun Microsystems, HP, IBMs etc
• Experience in supporting Windows, Unix, linux, SUN Solaris, IBM, Oracle and MySql database
• Supported RAID features, UDP, HTTPs, Java, Web services etc...
• Network Administration, TCP/IP, Backup(Amanda, disks), Systems recovery, System upgrade etc.
• Systems restore and update to new version remotely
• Set up and troubleshoot Wireless network

Confidential

Engineering technical support

Responsibilities:

• Test, troubleshoot and rework memories module devices
• Used high end microscope to rework and debug in fine pitch environment
• Test setup and test variety of electronics devices Used, operated many RF test equipments (Network, Spectrum Analyzer, power meter etc.)
• Tested and characterized RF modules from 200Mhz up to 40Ghz (ADC, DAC, VCO, Mixers, PLL, Power Amplifiers, Synthesizer, Filters etc.)
• Bring up and probing high end RF devices using powerful microscope to probe tiny chips

Confidential

Senior PCBdebug Technician

Responsibilities:

• PCBA testing and assembly for medical devices used Express PCB to update and design layout test board using IPC standards
• Failures analysis and R&D electronics support
• Using high end microscopes (Meiji, Nikon) to assembly, to solder or de - soldering SMD and BGA components and modules.
• Clean room protocol with ISO 9001 and FDA certified under ESD free environment
• Trouble shoot and tested tiny devices used in medical field
• Rework repair and troubleshoot PCB board

Confidential

PCB-RF Technician

Responsibilities:

• Reworked and tested bare board modules according IPC 600, 610 using schematics and layout
• Built and tested cables with different connectors using TDR tester
• Tear down Bare and PCB board modules and update to new ECO
• Built, drill and test in house fixtures prototypes for future model
• Repaired, soldered and de-soldered various SMT components(0603, 0402, 0201 ) and BGA under the microscope with hot air vacuums
• Clean room protocol with ISO 9001 certified under ESD free environment

Confidential

PCB-RF Technician

Responsibilities:

• Using Schematics and layout I have been troubleshooting different Communication PCB modules at component level
• Reworked, tested and fixed various and complex RF modules and RF PCB boards using IPC standards
• Soldered and de-soldered various SMT components(0603, 0402, 0201 ) and tiny SMD and BGA under the microscope with hot air vacuums
• Fixed and assembled many kinds of intercom and Radio modules used in TV and military sectors.
• Built and tested data and voice cables with different connectors using TDR tester
• Updated and reworked to new ECO applying IPC 600, 610
• Clean room protocol with ISO 9001 certified under ESD free environment
• Tested and verified chips used to interface microphone and telecom devices
• Used, operated many RF test equipments (Network, Spectrum Analyzer, power meter etc.) to test, to characterize modules (ADC, DAC, VCO, Mixers, PLL, Synthesizers, Power Amplifier, Filters etc.).

Confidential

Telecom /DSL/network & R&D Engineering Technician

Responsibilities:

• Troubleshoot, installed and tested DSL for customers (business/residential), solved many technical issues related to software and network problem
• Built and tested data and voice cables with different connectors using TDR tester
• Used, operated many RF test equipments (Network, Spectrum Analyzer, power meter etc.)
• Tested, characterized modules from 10Mhz to 20Mhz (ADC, DAC, VCO, Mixers, PLL, PA, Filters etc.).
• Designed, assembled, reverse engineered PCB boards, used Express PCB and Mentor Graphic PAD designer software to layout PCBs
• Used high end microscope assisted with hot air vaccum to assembly and rework fine pitch components
• Hand soldering of SMD parts (0201, 0402, 0603) using microscope and handheld heat guns (MetCal, Weller etc.)
• Research and Kitted parts from BOM and assembled drawings to implement rework from redlines or schematics
• SMT rework including fine pitch BGA, QFN, QFP, TQFN and using small rework station (soldering, de-soldering)
• Used and read schematics to troubleshoot and to test different stages of PCB boards
• Building of cables, connectors and harnesses
• Used and operated lasers workstation to check and verify deficiencies for pins or soldering integrity (shorts and open)
• Clean room protocol with ISO 9001 certified and ESD free environment

Confidential

Intern Test Engineer

Responsibilities:

• Tested, assembled transponders for different companies, Cisco, Alcatel, Foundry, Extreme and others.
• Optical-Mechanical assembly and computer testing of transponders using Labview software
• Optical-Mechanical alignment and troubleshooting
• Building of sub-assembly of optical and system level Test Platforms
• Clean room protocol (ISO 9001) and ESD free environment

Confidential

Control Room Service Technician

Responsibilities:

• Monitored national wide Lucent Technology campus security access.
• Made ID badges for all employees, visitors, and customers.
• Took picture and identification for all employees for our security database control
• Controlled access to laboratory by verifying and checking Lucent’s employees’ database.

Confidential

DSL Technician

Responsibilities:

• Tested various DSL modem via remote mechanical testing.
• Assisted and discussed with customers to solve different problem.
• Analyzed problems and dispatched field technicians in customer’s house if necessary.
• Installed and tested modems on customer’s front end.
• Building of cables, connectors and harnesses using TDR and others testing cables

Confidential

Laser Electronics Technician

Responsibilities:

• Tested electronics PCB boards interfaced with laser tubes that are ready after final stability test.
• Used schematics and layout to troubleshoot and test different stages of PCB boards
• Building of sub-assembly and system level Test Platforms
• Optical - mechanical component Aligned, calibrated, assembled and tested lasers tubes by following some specification of heat and resistance stability.
• Used Labview Software to test and control optical laser power intensity with different source.
• Reworked and Retested Lasers and boards after failing the final assembly stage.
• Tested and assembled different optical component and laser elements.
• Used high end microscope assisted to assembly and rework on PCB and Bare board that control laser and optical component
• Used and operated lasers workstation to check and verify deficiencies for pins or solder integrity (shorts and open)
• Basic Clean Room protocol (ISO 9000) and procedure and ESD free environment.

Confidential

Electronics and Fiber optics Supervisor

Responsibilities:

• Aligned, tested and assembled optical fiber glass and optical component element using high end microscope
• Train and guide electronics technician
• Install and setup various test benches
• Used and operated many optical instrument like microscopes, wavelength multimeter and laser equipment.
• Specialist in aligning, in assembling and repairing broken fiber using tiny optical tools.
• Setup and trained workstation for new Fiber optic Technicians.
• Used and operated lasers workstation to check and verify deficiencies for pins or soldering integrity (shorts and open)
• Used high end microscope assisted to assembly and rework on microscopic optical fiber
• Basic Clean Room protocol and procedure and ESD free environment.
• Operated in ISO 9000 standards guide lines