We provide IT Staff Augmentation Services!

Network Design Engineer Resume

4.00/5 (Submit Your Rating)

TX

SUMMARY

  • 7+ years of experience in Networking and Security, including hands - on experience in providing network support, installation and analysis for a broad range of LAN/WAN/MAN communication systems.
  • Proficient in Cisco IOS for configuration & troubleshooting of routing protocols: MP-BGP, OSPF, EIGRP, RIP, BGP v4, MPLS.
  • Hands on experience in configuring Cisco Catalyst 2960, 3750, 4500, 6500 and Nexus 3000, 5000, 6000, 7000 series switches and Cisco 2600, 2800, 3600, 3800, 7200, 7600 series routers, Load Balancers & Cisco Firewalls.
  • Hands on experience in configuring and supporting site-to-site and remote access Cisco, IPSec, VPN solutions using ASA/PIX firewalls, Cisco and VPN client.
  • Knowledge of implementing and troubleshooting complex layer 2 technologies such as VLAN Trunks, VTP, Ether channel, STP, RSTP and MST. Implementation of HSRP, VRRP for Default Gateway Redundancy.
  • Involved in troubleshooting of DNS, DHCP and other IP conflict problems.
  • Responsible for Check Point and Cisco ASA firewall administration across global networks.
  • Experience in working with Cisco Nexus Switches and Virtual Port Channel configuration.
  • Worked on F5 LTM, GTM series like 6400, 6800, 8800 for the corporate applications and their availability.
  • Experience working with Nexus 7K, 5K, 2K devices.
  • Experience in testing Cisco routers and switches in laboratory and deploy them on site production.
  • In-depth knowledge and hands-on experience in Tier II ISP Routing Policies, Network Architecture, IP Subnetting, VLSM, TCP/IP, NAT, DHCP, DNS, FT1 / T1 / FT3 / T3 SONET POS OCX / GigE circuits, Firewalls.
  • Strong knowledge of TACACS+, RADIUS implementation in Access Control Network.
  • Worked extensively in Configuring, Monitoring and Troubleshooting Cisco's ASA 5500/PIX security appliance, Failover DMZ zoning & configuring VLANs/routing/NAT with the firewalls as per the design.
  • Experience with convert Checkpoint VPN rules over to the Cisco ASA solution. Migration with both Checkpoint and Cisco ASA VPN experience.
  • Experience in designing MPLS VPN and QoS for architecture using Cisco multi-layer switches.
  • Configuring BGP/OSPF routing policies and designs, worked on implementation strategies for the expansion of the MPLS VPN networks.
  • Expertise in creating groups and pruning traffic flow using VLAN, VTP, ISL, 802.1Q.
  • Working experience with REMEDY for ticket change management process.
  • Excellent in documentation and updating client’s network documentation using Visio.

TECHNICAL SKILLS

Network Configuration: Advanced switch/router configuration (Cisco IOS access list, Route redistribution/propagation) RIP, IGRP, EIGRP, OSPF, IS IS,BGP v4, MP-BGP

WAN Protocols: HDLC, PPP, MLPPP

T1/E1: T3/E3/OCX (Channelized, Fractional & full).

Packet Switched WAN: ATM, FRAME RELAY, MPLS VPNs

Security Technologies: Cisco FWSM/PIX/ASDM, Nokia Checkpoint NG, Juniper SRX, Palo Alto, Checkpoint, F5 Load Balancer

Cisco Routers: Cisco GSR 12416, 12418, Cisco 7200vxr, Cisco 3640, Cisco 3600

Redundancy and management: HSRP, VRRP, GLBP, RPR, NSF/NSR, Wireshark, Solarwinds, SNMP

Physical interfaces: Fast Ethernet, Gigabit Ethernet, Serial, HSSI, Sonet (POS)

Layer 2 technology: VLAN, HSRP,VRRP,GLBP,STP, RSTP, PVST+, MST, PVLAN, Optimizing STP (Port Fast, Uplink Fast, Backbone Fast, Root Guard, BPDU Guard)

Layer 3 Switching: CEF, MLS, Ether channel (PAGP & LACP, Load Balancing)

Switches: Catalyst 6500, MSFC, MSFC2, 7600, 3700, 3500

Operating Systems: Microsoft XP/Vista/7, UNIX, Linux (Red hat, Opens use, Fedora), Windows Servers 2003/2008Windows MS-Office. VMware ESX 5.1, VMware Vsphere client.

PROFESSIONAL EXPERIENCE:

Confidential, TX

Network Design Engineer

Responsibilities:

  • Experience with manipulating various BGP attributes such as Local P, MED, Extended
  • Communities, Route-Reflector clusters, Route-maps and route policy implementation.
  • Deploying and decommission of VLANs on core ASR 9K, Nexus 7K, 5K and its downstream devices.
  • Performed OSPF, BGP, DHCP Profile, HSRP, IPV6, Bundle Ethernet implementation on ASR 9redundant pair.
  • Configured CIDR IP RIP, PPP, BGP, MPLS and OSPF routing.
  • Assisted in MPLS migrations, implemented a backup for the existing WAN connection using site-to-site IP sec VPN tunnels.
  • Experience with WCS predictive maps and RF Engineering Planning.
  • Switches Replace branch hardware with new 2851 routers and 2960 switches.
  • Conversions to BGP WAN routing. Which will be to convert WAN routing from OSPF to BGP (OSPF is used for local routing only) which involves new WAN links.
  • Convert Branch WAN links from TDM circuits to MPLS and to convert encryption from IPSec/GRE to Get VPN.
  • Configuring routing protocols OSPF, EIGRP, RIP, MPBGP, LDP and BGPV4.
  • Configuring HSRP between VLANs, Configuring Ether-Channels, Port Channel on 6500 catalyst.
  • Involved in the configuration & troubleshooting of routing protocols: MP-BGP, OSPF, LDP, EIGRP, RIP, BGP v4. Configured IP access filter policies.
  • Worked extensively on Cisco ASA 5500(5510/5540) Series, experience with convert PIX rules over to the Cisco ASA solution.

Environment: Cisco 2948/3560/4500/3560/ 3750/3550/3500/ switches and Cisco 3640/120007200/3845/3600/2800 routers, Cisco Nexus 7K/5K, Cisco ASA 500, Checkpoint, Windows server2003/2008, RIP, OSPF, BGP, EIGRP, LAN, WAN, VPN, HSRP.

Confidential

Network Engineer

Responsibilities:

  • Configured RIP, PPP, BGP and OSPF routing.
  • Involved in the configuration & troubleshooting of routing protocols: MP-BGP, OSPF, LDP, EIGRP, RIP, BGP v4. Configured IP access filter policies.
  • Creating and provisioning Juniper SRX firewall policies.
  • Created standard access lists to allow SNMP, NTP and logging servers.
  • Documented new VPN enrollments in a database and create standard procedures for further improvement.
  • Troubleshoot traffic passing managed firewalls via logs and packet captures.
  • Managed fast Layer 3 switched/routed LAN/WAN infrastructure as a part of Network team. The LAN consisted of Cisco campus model of Cisco 3550 at access layer, Cisco 6513 at distribution/core layer.
  • ConfigureVRRP & GLBP andVLANTrunking802.1Q & ISL, STP, Port Security on Catalyst 6500 switches.
  • Negotiate VPN tunnels using IPSec encryption standards and also configured and implemented site-to-site VPN, Remote VPN.
  • Provided proactive threat defense with ASA that stops attacks before they spread through the network.
  • Cisco ASA/Checkpoint Firewall troubleshooting and policy change requests for new IP segments that either come on line or that may have been altered during various planned network changes on the network.
  • Modified internal infrastructure by adding switches to support server farms and added servers to existing DMZ environments to support new and existing application platforms.
  • Responsible for Checkpoint and Cisco ASA firewall administration across global networks.
  • Generating RCA (Root Cause Analysis) for critical issues of layer1/layer2/layer3 problems.
  • Work on Physical site Inventory verification, gather information of various Cisco Network devices and Security Devices to develop Run book and Spec Book.
  • Cisco ASA/Checkpoint Firewall troubleshooting and policy change requests for new IP segments that either come on line or that may have been altered during various planned network changes on the network.
  • Configuration and troubleshooting of Cisco catalyst 6509, 7613 with supervisor cards.

Environment: Cisco 3750/3550/3500/2960 switches, Cisco 3640/12000/ 7200/3845/3600/2800 routers, Cisco ASA5510, Checkpoint, Palo Alto, Cisco Nexus 7K/5K, 2248/3560/5020/6509, ASA, Checkpoint, LAN, OSPF, BGP, RIP, EIGRP.

Confidential, Pittsburg, PA

Network Engineer

Responsibilities:

  • Designed and implemented Cisco VoIP infrastructure for a large enterprise and multi-unit office environment.
  • Met aggressive schedule to ensure a Multi-office reconfiguration project which was successfully delivered.
  • Responsible for service request tickets generated by the helpdesk in all phases such as troubleshooting, maintenance, upgrades, patches and fixes with all around technical support
  • Supporting EIGRP and BGP based PwC network by resolving level 2 &3 problems of internal teams & external customers of all locations.
  • Upgrade Cisco Routers, Switches and Firewall (PIX) IOS using TFTP.
  • Updated the HP open view map to reflect and changes made to any existing node/object.
  • Handled SRST and implemented and configured the Gateways, Voice Gateways.
  • Configuring HSRP between the 3845 router pairs for Gateway redundancy for the client desktops.
  • Configuring STP for switching loop prevention and VLANs for data and voice along with Configuring port security for users connecting to the switches.
  • Ensure Network, system and data availability and integrity through preventive maintenance and upgrade.
  • Involved in L2/L3 Switching Technology Administration including creating and managing VLANs, Port security, Trunking, STP, Inter-Vlan routing, LAN security.
  • Worked on the security levels with RADIUS, TACACS+.
  • Completed service requests (i.e. - IP readdressing, bandwidth upgrades, IOS/platform upgrades, etc.)
  • Identify, design and implement flexible, responsive, and secure technology services.
  • Modified internal infrastructure by adding switches to support server farms and added servers to existing DMZ environments to support new and existing application platforms.
  • Configured switches with port security and 802.1x for enhancing customers security.

Environment: Net Flow, TACACS, EIGRP, RIP, OSPF, BGP, VPN, MPLS, CSM, SUP720, Ether Channels, Cisco 7200/3845/3600/2800 routers, Fluke and Sniffer, Cisco 6509/ 3750/3550/3500/2950 switches, Checkpoint firewalls (SPLAT).

Confidential

Network & System Engineer

Responsibilities:

  • Provided estimated bandwidth requirements for data replication, to best determine adequate timing for Migration service levels.
  • Configuring HSRP between VLANs, Configuring Ether-Channels, Port Channel on 6500 catalyst.
  • Switches Replace branch hardware with new 2851 routers and 2960 switches.
  • Implemented WLAN Aruba Wireless Access Points and its Controllers at various corporate sites fort
  • 11n Infrastructure and its legacy technologies.
  • Experience in working with Cisco Nexus 5000 series switches for data center.
  • Configured OSPF on CISCO devices with multiple routing processes and redistributed them. Tested and hands on experience in multi area OSPF topologies.
  • Configuring, managing and troubleshooting networks using routing protocols like RIP, EIGRP and
  • OSPF (Single Area And Multi Area).
  • Assisted with troubleshooting all network issues with routers and switches when necessary and consulted with on Call tech as needed for client.
  • Monitor, troubleshoot, test and resolve Frame Relay, ATM, MLPPP, PPP, and Dial-up.
  • Configuring/Troubleshoot issues with the following types of routers Cisco (7200, 6500, 4500, 1700,
  • 2600 and 3500 Series), to include: bridging, switching, routing, Ethernet, NAT, and DHCP, as well as assisting with customer LAN MAN, router/firewalls.
  • Wrote IOS and CAT OS upgrade procedures and Pre/Post checks for customer production upgrades.
  • Excellent Troubleshooting Skills and Customer Centric approach.
  • Actively participated in upgrading fast Ethernet, Layer 3 switched/routed LAN infrastructure from Cisco 3640 to Cisco 2811 ISR routers and switches at access level to 2950, 3550.
  • Configuring Vlan’s, VTP’s, enabling trunks between switches.
  • Configured VLANs with 802.1q tagging. Configured Trunk groups, ether channels, and Spanning tree for creating.

Environment: Cisco 7200/3845/3600/2800 routers, TACACS, EIGRP, RIP, OSPF, BGP, VPN, Ether Channels, Fluke, Sniffer.

Confidential

Network Engineer

Responsibilities:

  • Performed IOS upgrades on Catalyst 1900, 2900, 3500 series switches and 2500, 2600, 3600 series routers.
  • Responsible for maintenance and utilization of VLANs, Spanning-tree, HSRP, VTP of the switched multi-layer backbone with catalyst switches.
  • Implemented and configured routing protocols like EIGRP, OSPF and BGP.
  • Connected switches using trunk links and Ether Channel
  • Used Network Monitoring tool to manage, monitor and troubleshoot the network.
  • Configured Cisco IOS Feature Set, NAT and Simple Network Management Protocol (SNMP) for Network Security implementation.
  • Implemented redundant Load balancing technique with Internet applications for switches and routers.
  • Support Network Technicians as they require & support for problem resolution including performing diagnostics & configuring network devices

Environment: Catalyst 1900/2900/3500 series switches, 2500/2600/3600 series routers.

We'd love your feedback!