SUMMARY

• Over 8 years of experience in the field of routing, switching, firewall technologies and troubleshooting of complex network systems.
• Experience in designing, installing, configuring and maintenance of Enterprise Networks using Cisco routers, Catalyst Switches and Load Balancers, Cisco Firewalls.
• Strong hands on experience in installing, configuring, and troubleshooting of Cisco Catalyst 6500, 4500, 3750, 2950 and 3500XL series switches, Cisco 7600, 7200, 3800, 3600, 2800, 2600, 2500 and 1800 series Routers.
• Experience with Juniper: EX - 2200, EX-4200, EX-4500, MX-480 Switches and M series Routers.
• Experience with Juniper SRX 210, SRX 240 firewalls.
• Experience with configuringNexus2000 Fabric Extender (FEX) which acts as a remote line card (module) for the Nexus5000.
• Experience working with Nexus 7010, 5020, 2148, 2248 devices.
• Experience with WiFi test equipment and isolation chambers
• Experience with F5 load balancers LTM, GTM series like 6400, 6800, 8800 for the corporate applications.
• Extensive experience in configuring and troubleshooting of routing protocols RIP v1/v2, EIGRP, OSPF, IS-IS, BGP and MPLS.
• Expertise experience in implementing and troubleshooting VLANs, VTP, STP, RSTP, DTP, Root Guard, BPDU Guard, Port Fast, Uplink Fast, Backbone Fast, Ether Channel, PAGP, LACP and 802.1Q.
• Extensive Experience in WAN Technologies, Switching Technologies along with Failover Mechanisms & Inter VLAN Routing types.
• Well Experienced in configuring protocols HSRP, GLBP, VRRP, ICMP, IGMP, PPP, HDLC, PAP, CHAP, and SNMP.
• Good at analyzing RF signals, interference and isolation techniques.
• Experience in installing and configuring DNS, DHCP server.
• Proficiency in handling Network Monitoring tools and Packet capture tools.
• Experience in installing and maintaining network monitoring tools like Cisco works, HP open view and network analyzers like Wire shark, Solar winds tools.
• Moderate knowledge in configuring and troubleshooting Cisco Wireless Networks: LWAPP, WLC, WCS, Standalone APs, Roaming, Wireless Security Basics, IEEE 802.11 a/b/g, RF spectrum characteristics.
• Working experience with Natting techniques on firewalls such as Cisco PIX, Cisco ASA appliance.
• Good knowledge of the basic RF parameters and signal flow.
• Good knowledge and experience in Installation, Configuration and Administration of Windows 2000/2003, HTTP,FTP,DNS,NTP,DHCP servers under various LAN and WAN environments.
• Efficient use of Microsoft VISIO/Office for technical documentation and presentation tools.
• Excellent analytical, organizational, problem solving & resolution skills.

TECHNICAL SKILLS

Routers: Cisco 2620, 2901, 3925, 3945E, 7201, 7613

Routing: OSPF, EIGRP, BGP, RIP, PBR, Route Filtering, Redistribution, Summarization, Static routing

Switches: Cisco Catalyst 2232, 2960, 3560, 4507R+E, 5596, 6509-E, 7009 Nexus 2232, 5596, 7009

Switching: LAN, VTP, STP, PVST+, RPVST+, Inter VLAN routing & Multi-Layer Switch, Ether channels, MPLS, Transparent Bridging, DMVPN

Juniper: EX-2200, EX-4200, EX-4500, MX-480, M Series, SRX210, SRX240

Wireless: RF, Bluetooth, WiFi.

Network Security: Cisco ASA 5540, ACL, IPSEC, Pala Alto.

Load Balancer: F5 Networks (Big-IP) LTM 6400, 1600

LAN: Ethernet, Fast Ethernet, Gigabit Ethernet

WAN: PPP, HDLC, Channelized links (E1/T1/E3/T3), Fiber Optic Circuits, Frame Relay.

Gateway: HSRP, VRRP, GLBP

Various Features IOS and Features: IRDP, NAT, SNMP, SYSLOG, NTP, DHCP, CDP, TFTP, FTP

AAA Architecture: TACACS+, RADIUS, Cisco ACS

Network Management: Wireshark, SNMP, Ethereal

Operating Systems: Windows (98, ME, 2000, XP, Server 2003/2008, Vista, Windows 7)

PROFESSIONAL EXPERIENCE

Confidential, Philadelphia, PA

Network Engineer

Responsibilities:

• Designing, installing configuring and maintenance of networks using Cisco routers, Catalyst switches and Load balancers, Cisco firewalls.
• Installing, configuring and troubleshooting of Cisco Catalyst 6500 series switches, Cisco 7600, 7200 series routers.
• Responsible for the Global design, engineering, and level 2/3 support of existing network technologies services and the integration of new network technologies / services.
• Implemented antivirus and web filtering on Juniper SRX 240 at the web server
• Key contributions include troubleshooting of complex LAN /WAN infrastructure that include routing protocols EIGRP, OSPF & BGP.
• Providing daily network support for national wide area network consisting of MPLS, VPN and point-to point site.
• Worked with Cisco Nexus2148 Fabric Extender and Nexus 5000 series to provide a Flexible Access Solution for data center access architecture.
• Configuring Big-IP F5 LTMs (virtual servers, pools, SNATs, health monitors) for managing the traffic and tuning the load on the network servers.
• ConfigureVRRP & GLBP andVLANTrunking802.1Q & ISL, STP, Port Security on Catalyst 6500 switches.
• Configuring STP for switching loop prevention and VLANs for data and voice along with Configuring port security for users connecting to the switches.
• Worked on the security levels with RADIUS, TACACS+.
• Experience in analyzing system requirements and running test cases.
• Upgraded the IOS on the 6500 switch and saving the old system configuration and running-configuration.
• Carried out Route-redistribution between different routing protocols like OSPF, BGP, and EIGRP for increased efficiency.
• Administration of Cisco ASA firewalls in the DMZ and FWSM in the Server Farm to provide security and controlled/restricted access.
• Serve as part of a team of network engineers responsible for base wide network upgrade from Cisco Layer 3 Catalyst switches to Juniper Layer 3 EX4200 & EX3200 switches.
• Design, implement and administer IPv4/IPv6 enterprise network infrastructure utilizing Juniper routers.
• Expert in Microsoft Visio 2013.

Confidential - Chicago, IL

Network and Telecomm Engineer

Responsibilities:

• Worked on Network design and support, implementation related internal projects for establishing connectivity between the various field offices and data centers.
• Duties included monitoring network performance using various network tools to ensure the availability, integrity and confidentiality of application and equipment and to provide support for Cisco network.
• Configuring RIP, OSPF and Static routing on JuniperM and MX series Routers.
• Configuring VLAN, Spanning tree, VSTP, SNMP on EX series switches.
• Design and configuring of OSPF, BGP on Juniper Routers and SRX Firewalls.
• Performing the daily health Check in Telecomm and Networking.
• Worked on cisco policy trace, Access policies, and URL categories to either give or block the
• Worked on CLI to enable the ports and configuration of switches and routers.
• Upgrading the IOS to the newest version using the console, TFTP server on Firewalls, switches and Routers.
• Physically connecting the ports between the switches and the servers on to the racks.
• Setting up the WIFI connections whenever needed as per the users requests.
• Enabling the TCP, UDP, SMTP ports to allow the traffic from one server to another server by performing the trace route to find out where the traffic is blocked by the firewall.
• Performing tests on WiFi equipment, Performed testing of agent Extension mobility phones.
• Assigning the Channels to each agent on VOIP ULTRAVAM devices.
• Troubleshooting issues with vendors in case of failures in call recording.
• Troubleshooting connectivity issues to web links on both internal and external domains.
• Worked on configuring internet connection within the organization by consulting with different Vendors.
• ConfiguredJuniperMX480s, EX8200s, EX4500s, EX4200s, and SRX5800s from scratch to match design.
• Troubleshoot the BIG-F5 1600 LTM through constant contact with the vendor.
• Configuring and troubleshooting site-to-site IPSEC VPN tunnels onVPN concentrators and ASA firewallswith private vendors.
• Worked on commissioning and decommissioning of the MPLS circuits for various field offices.
• Network Cabling, dressing, labeling and troubleshooting various network drops onsite.
• Weekly documentation of updates on our technical work.

Confidential, Iselin, NJ

Network Engineer

Responsibilities:

• Responsible for the Global design, engineering, and level 2/3 support of existing network technologies services and the integration of new network technologies / services
• Key contributions include troubleshooting of complex LAN /WAN infrastructure that include routing protocols EIGRP, OSPF & BGP.
• Providing daily network support for national wide area network consisting of MPLS, VPN and point-to point site.
• Racking, stacking, configuring NEXUS 5K and 2K and 7K.
• Worked with Cisco Nexus2148 Fabric Extender and Nexus 5000 series to provide a Flexible Access Solution for data center access architecture.
• User authentication and resource allocation with Cisco ACS server using Radius and TACACS+ protocols for administrative control.
• Configuring Cisco ACS 4.0 along with TACACS+ server authentication.
• Creating, adding and deleting new rules and objects on Checkpoint firewalls R65/ R75.
• Troubleshoot network issues using Checkpoint tracker tool.
• Documentation involved preparing MOPs, Work Orders, DCE cabling and NEMS request. Also creating and submitting Remedy tickets and Homer work orders.
• Configuring and troubleshooting site-to-site IPSEC VPN tunnels onVPN concentrators and ASA firewallswith private vendors.
• Configuring STP for switching loop prevention and VLANs for data and voice along with Configuring port security for users connecting to the switches.
• Involved in L2/L3 Switching Technology Administration including creating and managing VLANs, Port security, Trucking, STP, Inter-Vlan routing, LAN security.
• Worked in Configuration and extension of VLAN from one network segment to other segment between different vendor switches (Cisco, Juniper).
• Worked on commissioning and decommissioning of the MPLS circuits for various field offices.
• Updated the HP open view map to reflect and changes made to any existing node/object.
• Handled SRST and implemented and configured the Gateways, Voice Gateways.
• Network Cabling, dressing, labeling and troubleshooting various network drops onsite.

Confidential

Network Engineer

Responsibilities:

• Worked as part of a team to manage Enterprise Network Infrastructure as a Tier 3 Support Engineer.
• Involved in Configuring and implementing of Composite Network models consists of Cisco 7600,7200,3800 series routers and Cisco 2950, 3500,5000, 6500 Series switches.
• Configuring Firewall switch module on Cisco 6506 distribution layer switches.
• Configuring VTPs, Trunking, inter-Vlan routing, port fast, uplink fast, and backbone fast on access layer switches.
• Implemented a backup for the existing WAN connection using site to site IPsec VPN tunnels.
• Configuring and troubleshooting OSPF routing protocol on the corporate network.
• Worked on the migration of Frame Relay based branches to MPLS based VPN for customer’s WAN infrastructure.
• Worked on the migration of existing PIX firewall to ASA firewall. PIX OS upgrade from 6.3 to 7.0 (x)
• Has done the Configuration on BIG IP (F5) Load balancers and also monitored the Packet Flow in the Load balancers.
• Managing enterprise BGP setup by configuring and troubleshooting BGP related issues. My responsibility was also to add new BGP peers for remote branch offices and business partners.
• Scaling of IGP and BGP in the core.
• Troubleshoot issues related to VLAN, VLAN Trunking, HSRP failovers, related issues.
• Configuration of NAT.
• Maintain effective communications with vendors, peers and clients in resolution of trouble-tickets, equipment RMAs, and support requests.
• Planning for upgrade of IOS on devices and performing the upgrade.
• Assisted in the architecture, evaluation and recommendations related to purchasing and installing hardware, software related to IP Networking.
• Monitored network traffic and developed capacity planning initiatives, making necessary recommendations for additional resources or hardware.
• My responsibilities also include writing and executing Test Plan, Desk level procedures and Test Case Documents for smooth network operations of the remote location, assisted in design guidance for infrastructure upgrade.