SUMMARY:

• Twenty - four years of experience in piping design/field liaison Field engineer/field implementation/coordination,/Supervision /Oversight. planning, construction design/liaison representative.. Completed projects of new design composites, retro-fit design, field coordination, system validation, checking, fire protection, isometrics, system walk down, overhaul design, material take-off, component arrangements, pipe supports/spool sheets and piping specification development. Nuclear- Eighteen years experience in piping, civil/structural design modifications/ Planning, Field Engineer Decontamination and Decommission of units, radiological work in hot areas for Security projects, Supported craft in field installations/Resolved design issues as they occurred with field Implementations.
• Traceability of materials for all safety-related piping and components. Civil Six years of Wastewater treatment plants. Design of Roadways, Ditches, Site plans, Buildings. Site grading, drain water systems Fences, bollards, hardenpost, planter’s passive-resistive barriers. Electrical design Eight years experience industrial/commercial field. Responsible for conduit layout and routing design, sizing conduit, conduit matrix. Developed lighting and conduit layouts for commercial and private sector (nuclear). Generated detailed electrical equipment layouts. Nuclear Asset Management Suite/Passport 4 years.

WORK EXPERIENCE:

Confidential

Planner

Responsibilities:

• Planner for Mods. being implemented.

Confidential

Responsibilities:

• Field observation with craft working safely as work packages were being implemented.
• Making sure craft are doing with they are suppose to be doing.

Confidential

Field Engineer - Mechanical/Electrical Planner

Responsibilities:

• Mechanical work planner for Unit 1/Unit 2 Common FeedWater NFP-805 project.
• Develop detailed work plans for "NFP-805" modification packages.
• Develop and write detailed step by step work packages in "Asset Suites."
• Provided construction solutions and work with superintendents to develop craft estimates.
• Initiate and procure materials to support construction activities.
• Provided technical engineering support to resolve installation issues to ensure timely completion of field activities.
• Provided oversight to ensure contractors were using current documents, procedures, drawings, and work instructions, and were complying with the suite requirements provided in those documents including field installations.
• Lead Pre-job briefs.

Confidential

Mechanical/Electrical Field Engineer

Responsibilities:

• Conducted field walk downs for constructability review before inception
• Lead engineering walk downs to validate implementation was carried out as dictated by the design packages.
• Provided technical engineering support to resolve installation issues to ensure timely completion of field activities
• Developed specifications for procurement of materials for new construction
• Co-ordinate work activities with multiple construction and engineering work groups
• Outage work as field engineer in containment, control rm spent fuel rm.
• Provided oversight to ensure contractors were using current documents, procedures, drawings, and work instructions. And were complying with the site requirements provided in those documents including field installations.
• Lead Pre-job briefs
• Traceability of materials for all safety-related electrical / piping and components

Confidential

Electrical/Mechanical Field Engineer

Responsibilities:

• Conducted field walk downs for constructability review before inception
• Supervised\Oversight of craft (mechanical/electrical)for implementation of work packages.
• Developed specifications for procurement of materials for new construction
• Co-ordinate work activities with multiple construction and engineering work groups
• Outage work as field engineer in containment, control rm spent fuel rm.
• Supported craft in field installations/Resolved design issues as they occurred with field Implementations.
• Traceability of materials for all safety-related electrical / piping and components.

Confidential

Electrical/Mechanical/Civil Field Engineer

Responsibilities:

• Conducted field walk downs for constructability review before inception
• Supervised\Oversight of craft (mechanical/electrical)for implementation of work packages.
• Co-ordinate work activities with multiple construction and engineering work groups
• Outage work as field engineer in containment, control rm spent fuel rm.
• Supported craft in field installations/Resolved design issues as they occurred with field Implementations.
• Traceability of materials for all safety-related piping and components

Confidential

Electrical/Mechanical/Civil Field Engineer

Responsibilities:

• Conducted field walk downs for constructability review before inception
• Initiated work instructions utilizing Passport / SharePoint
• Security Upgrade Implementations
• Supervised\Oversight of craft (mechanical/electrical)for implementation of work packages.
• Co-ordinate work activities with multiple construction and engineering work groups
• Developed specifications for procurement of materials for new construction
• Procured materials and developed clearance orders
• Traceability of materials for all safety-related piping and components.
• Obtained site permits and co-coordinated acceptance with work groups
• Supported craft in field installations/Resolved design issues as they occurred with field

Confidential

Electrical/Mechanical/Civil Planner - Field Engineer

Responsibilities:

• Conducted field walk downs for constructability review before inception
• Initiated work instructions utilizing Passport / SharePoint
• Security Upgrade Implementations
• Supervised\Oversight of craft (mechanical/electrical)for implementation of work packages.
• Co-ordinate work activities with multiple construction and engineering work groups
• Developed specifications for procurement of materials for new construction
• Procured materials and developed clearance orders
• Communicated with outside vendors
• Obtained site permits and co-coordinated acceptance with work groups
• Supported craft in field installations/Resolved design issues as they occurred with field
• Implementations.
• Traceability of materials for all safety-related piping and components

Confidential

Designer III/Field Engineer

Responsibilities:

• Performed field walk-downs to determine the need and depth of work to be implemented
• Prepared work orders utilizing Nuclear Asset Management Suite
• Supervised\Oversight of craft (mechanical/electrical)for implementation of work packages.
• Supported craft in field installations/Resolved design issues as they occurred with field Implementations. Traceability of materials for all safety-related piping and components.

Confidential

Field Engineer/Electrical/Civil Planner

Responsibilities:

• Co-ordinate project with Operations and Engineering Departments
• Performed field walk-downs to determine the need and depth of work to be implemented
• Supervised\Oversight of craft (mechanical/electrical)for implementation of work packages.
• Prepared work orders utilizing Nuclear Asset Management Suite
• Supported craft in field installations/Resolved design issues as they occurred with field Implementations. Traceability of materials for all safety-related piping and components..

Confidential

Field Engineer - Tech. Spec./Civil/Structural Designer - Electrical Designer/Planner

Responsibilities:

• Conducted field walk-down/design layout and detailing of fencing, hardenpost, bollards detailed rebar, design/detailed Foundations, design/detailed Armory plans, and configuration of buildings. HVAC systems layout and design of duct work, and equipment for modifications .
• Field walk-down for electrical project for new Security bldg modifications
• Verified and updated conduit cable runs, trays, one - line diagrams, mcc security alarm for fencing. control panel fabrication.
• Co-ordinate project with Operations and Engineering Departments
• Performed field walk-downs to determine the need and depth of work to be implemented
• Prepared work orders utilizing Nuclear Asset Management Suite

Confidential

Piping Design/Field Engineer

Responsibilities:

• Conducted field walk downs and verified all existing piping instrumentation and equipment layouts. Designed new piping layouts for new piping and equipment arrangements; surveyed existing columns and buildings for Elevation information.
• Supervised\Oversight of craft (mechanical/electrical)for implementation of work packages.
• Supported craft in field installations/Resolved design issues as they occurred with field Implementations. Traceability of materials for all safety-related piping and components.

Confidential

Piping Designer/Mechanical Planner

Responsibilities:

• Performed field walk downs verifying equipment, piping, instruments and piping supports. Field coordination, produced complex three dimensional drawings.
• Utilized Plant 4-D to route piping and placement of new equipment. Develop flow diagrams and P&IDs; work from concepts, ideas, or rough sketches from field walk downs. Co-ordinate project with Operations and Engineering Departments
• Traceability of materials for all safety-related piping and components.
• Prepared work orders utilizing Nuclear Asset Management Suite

Confidential

PDS Piping Designer

Responsibilities:

• Designed and routed pipe utilizing Smart Plant 3D
• Located piping supports and equipment utilizing Smart Plant 3D
• Revamped unit per customer specifications, produced complex three dimensional drawings
• Back checked drawings per flow diagrams and P&ID’s, specifications
• Traceability of materials for all safety-related piping and components.

Confidential

Sr. Piping Designer - PDS Designer/Checker

Responsibilities:

• Designed general facility piping and instrumentation drawings,
• Redlined flow diagram /P&ID’S & Models after cross checking them against each other
• Traceability of materials for all safety-related piping and components.
• Supported craft in field installations/Resolved design issues as they occurred with field Implementations.
• Decontamination and Decommission of units.
• Extracted ISO’S from Model. produced complex three dimensional drawings
• Checked equipment layout using equipment modeling for equipment items
• PDS/Smartplant software. Systems included HVAC duct work, floor and sanitary drains, breathing air, fire protection and potable water.

Confidential

Sr. Piping Designer/Field Engineer - PDS Designer

Responsibilities:

• Redlined flow diagrams/P&ID’S & Models after cross checking them against each other
• Generated and routed new utility piping in Model and on P&ID’s
• Supervised\Oversight of craft (mechanical/electrical)for implementation of work packages.
• Supported craft in field installations/Resolved design issues as they occurred with field Implementations. Traceability of materials for all safety-related piping and components
• Decontamination and Decommission of units.
• Checked piping area drawings, included civil, structural and instrumentation elements
• Extracted ISO’S from Model. produced complex three dimensional drawings
• Checked equipment layout using equipment modeling for equipment items
• Designed and checked all building service piping in the BAP/BSR Buildings utilizing PDS/Smartplant software. Systems included HVAC piping, floor and sanitary drains, breathing air, fire protection and potable water

Confidential

Sr. Piping Designer/Field Engineer

Responsibilities:

• Field walk-down/design layout of new flow/P&ID system per client spec’s
• Developed material review/specification for total system check
• Implemented complete design/checking for all building service piping (retro-fit) using micro station V-8.Systems included HVAC piping, floor and sanitary drains, Breathing AIR, fire protection, and potable water, Field coordination.
• Supervised\Oversight of craft (mechanical/electrical)for implementation of work packages., scheduling work modification projects
• Decontamination and Decommission of units.
• Supported craft in field installations/Resolved design issues as they occurred with field Implementations.

Confidential

Sr. Field Piping Designer/Checker/Field Engineer

Responsibilities:

• Field walk-down/ design layout of new flow/P&ID system per client spec’s
• Supervised\Oversight of craft (mechanical/electrical)for implementation of work packages., scheduling work modification projects
• Field coordination
• Supported craft in field installations/Resolved design issues as they occurred with field Implementations.
• Traceability of materials for all safety-related piping and components.

Confidential

Sr. Piping Designer/Mechanical Planner

Responsibilities:

• Designed and checked all building service piping high purity piping and site plans for waste water treatment plants in Iraq. field walk-down/ design layout of new flow/P&ID system per client spec’s, detailed specifications.
• Traceability of materials for all safety-related piping and components
• Utilized PDS/Smartplant to produce complex three dimensional drawings
• Co-ordinate project with Operations and Engineering Departments
• Field walk-downs to determine the need and depth of work to be implemented
• Prepared work orders utilizing Nuclear Asset Management Suite.

Confidential

Sr. Piping Designer/Mechanical Planner

Responsibilities:

• Design of new piping & steel arrangements, updated existing piping and instrumentation information on existing PID’s, PFD’s.
• Traceability of materials for all safety-related piping and components.
• Field routed new pipes from tank farm to equipment in new/existing buildings.
• Co-ordinate project with Operations and Engineering Departments
• Performed field walk-downs to determine the need and depth of work to be implemented
• Prepared work orders utilizing Nuclear Asset Management Suite

Confidential

Sr. Field Piping Designer/ Field Engineer

Responsibilities:

• Conducted field walk down to verify all existing piping, instrumentation, and equipment. Designed piping layouts for new piping and equipment arrangements, surveyed existing columns and buildings for elevation information.
• Supervised\Oversight of craft (mechanical/electrical)for implementation of work packages., scheduling work modification projects
• Supported craft in field installations/Resolved design issues as they occurred with field Implementations.

Confidential

Sr. Piping Designer

Responsibilities:

• Design of new and existing P&ID’s, PFD’s and Equipment arrangements. Using Pegs system-intelligent drawings. Re-routed piping due to interferences in the field.

Confidential

Piping Designer/Electrical Designer/ Electrical Planner/ Field Engineer

Responsibilities:

• Design of P&ID’s equipment locations, piping turnout’s, Rerouted existing piping for new design. Re-routed conduit layout to support power to new piping and turnouts. Placement of fences and design of new access road around the lake. For the Owns Lake Dust Mitigation Project. Revised grading plans. Using PDS.
• Supported craft in field installations/Resolved design issues as they occurred with field Implementations.
• Co-ordinate project with Operations and Engineering Departments
• Performed field walk-downs to determine the need and depth of work to be implemented
• Prepared work orders utilizing Nuclear Asset Management Suite.

Confidential

Tech. Spec./ Civil Designer/Sr. Piping Designer/ Field Engineer

Responsibilities:

• Conducted field walk-down/design layout and detailing of fencing, hardenpost, bollards Planters, Armory plans, k-rail placement and configuration of buildings. Drain water systems.
• SENIOR PIPING DESIGNER/ELECTRICAL DESIGNER.
• Conducted field walk-down design layout and detailing for of all FeedWater & High Flow Mud Piping System. Traceability of materials for all safety-related piping and components.
• Field walk-down for electrical project of North Security Bldg. Field measurement,
• Verified and updated conduit cable runs, trays, rec.
• Prepared final detailed layout of assembly drawing. Designed final details of electrical and piping safeguard drawings.
• Decontamination and Decommission of units.
• Supported craft in field installations/Resolved design issues as they occurred with field Implementations.

Confidential

MicroStation Piping Designer/ Field Engineer

Responsibilities:

• Conducted field walk-downs for of all terminal and pipe line piping and instrumentation systems while verifying equipment and safety devices
• Redlined and updated P&IDs by field sketches; converted sketches to an isometric system by utilization of MicroStation J. Control panel fabrication.
• Supervised\Oversight of craft (mechanical/electrical)for implementation of work packages., scheduling work modification projects
• Checked designs for final design spec’s for piping, civil, and some electrical..
• Supported craft in field installations/Resolved design issues as they occurred with field Implementations. Traceability of materials for all safety-related piping and components

Confidential

MicroStation & AutoCAD Designer/ Field Engineer

Responsibilities:

• Design seismetic pipe supports for nuclear power plants
• Updated Isometrics drawings for compliance utilizing MicroStation J and AutoCAD 2002
• Updated piping isometrics
• Traceability of materials for all safety-related piping and components
• Supported craft in field installations/Resolved design issues as they occurred with field Implementations.

Confidential

MicroStation & AutoCAD Pipe Designer/Checker/ Field Engineer

Responsibilities:

• Designed and routed Main Gas Piping from headers to turbine in compressor station. Located ESD stands, designed ditches and roads in site drawings. Located and routed air water, ESD lines through compression and auxiliary building. Located and designed domestic and fuel gas separation design domestic water lines for auxiliary building. Utilized MicroStation J, AutoCAD Release 2002 to update drawings to ISO 9000 compliance.
• Checked drawings for final design.
• Supervised\Oversight of craft (mechanical/electrical)for implementation of work packages., scheduling work modification projects
• Traceability of materials for all safety-related piping and components
• Supported craft in field installations/Resolved design issues as they occurred with field Implementations.

Confidential

MicroStation Piping Designer/Checker

Responsibilities:

• Verified Piping & Instrumentation system as-built by field walk-downs for hazard analysis while redlining and creating field sketches for changes
• Updated Equipment & Safety Device Databases for ISO 9000 compliance
• Contacted Vendors for Equipment Information
• Designed piping, equipment, site grading (expansion) fences. Buildings, and storm water drainage system Checked drawings for final design.

Confidential

MicroStation Piping Designer/Field Engineer

Responsibilities:

• Conducted field walk-downs for hazard analysis of all plant piping and instrumentation systems while verifying equipment and safety devices
• Redlined and updated P&IDs by field sketches; converted sketches to an isometric system by utilization of MicroStation SE for ISO9000 compliance
• Supervised\Oversight of craft (mechanical/electrical)for implementation of work packages., scheduling work modification projects
• Storm water drainage systems, site grading, design /layout of new piping and equipment.
• Supported craft in field installations/Resolved design issues as they occurred with field Implementations.