SUMMARY:

• Dynamic and enthusiastic Network Security and Control Engineer, Electrical, Test and Instrumentation Engineer with Five years plus of experience in Network Security, Controls & Instrumentation, Electrical Power, Automation, Test and Research Analysis.
• Ready to implement my experience at a growth oriented company by immediately contributing to all technical aspects including but not limited to testing, control systems design, electrical schematic development, P&ID, automation, quality control and research analysis.
• Working knowledge of PLC,RTU,SCADA,DCS (Distributed Control System),Delta V, CISCO, ARUBA,VPN (S2S,SSL), Firewall,OSPF, BGP, RIP,EIGRP, Juniper Network, DNS, DHCP, PROXY, ARUBA, IPS/IDS and HMI systems design, iconfig, IPX (Internetwork Packet Exchange) protocol, Modbus. Profibus, Iconic Configuration.
• LAN & WAN Knowledge, Proxy Servers, Networking Knowledge, Network Design and Implementation, Network Troubleshooting, Network Hardware Configuration, Network Performance Tuning
• Skilled in the use of hand tools and measuring instruments such as oscilloscope, Avometer, Frequency generator, Bridges and so onto quickly test, detect/troubleshoot electro - mechanical equipment. knowledged of ISA,ANSI,NEC,IEC,FEMA, NEMA standards and security practice ( ISO 17799, NIST, etc.)

SKILL:

• Microsoft Office
• MATLAB
• C++
• LabVIEW
• TCPIP
• Networking
• DSP
• OSPF
• EIGRP
• System Generator
• Multisim
• Xilinx
• EPlan
• VHDL
• AutoCAD
• FPGA
• PLC
• HMI
• Dspace reading of blueprints and schematics single-line diagram power word and Load flow calculation.

Confidential, Folsom, CA.

Network & Security Engineer

Responsibilities:

• Designed and implemented Access Control Lists, IDS/IPS, Virtual LAN, Routing, Switching, S2S VPN and Firewall.

• Designed and implemented various networking devices to ensure best practices, security protocols, and configurations are installed.
• Maintained accurate documentation of firewalls and network security support activities and upgrade processes
• Established and maintained network performance by building net configuration like Firewall rulesets and connections; troubleshooting network problems
• Worked primarily with Cisco, Checkpoint, Stonesoft, Extreme, F5 and Juniper Firewall products to help design, confirm, determine, upgrade and/or troubleshoot Firewall traffic flows.
• Maintained Juniper/Junos SSL appliances and supply remote access to internal/external users using SSL VPN technology

Confidential, Houston, TX

Responsibilities:

• Analyzed, troubleshooting and correcting network problems remotely and on-site and provided end user training

• Applied, changed, revoked and periodic review of end user access to applications, file servers, VPN access, Internet access and Active Directory
• Maximized network performance such as firewalls and intrusion detection systems by monitoring performance; troubleshooting network problems and outages; scheduling upgrades; collaborating with network architects on network optimization.
• Secured network system by establishing and enforcing policies; defining and monitoring access
• Monitored and maintained Firewalls, IPSec gateways and any other related equipment and services.
• Available on-call, to rapidly troubleshoot any problems resulting from the changes include LAN, WAN, wireless and remote networking issues.
• Provided reports to management regarding the effectiveness of network and data security and making recommendations for the adoption of new policies, procedures and technologies as required
• Planned, scheduled, and implemented network upgrades, implementations, and migrations in a timely manner, and during times that will have the minimum impact on the users of the affected networks & systems
• Wrote technical reports that include suggested resolution for identified problem areas and perform operational risk assessment.
• Updated job knowledge by participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations.
• Engineered, implemented, and monitored security measures for the protection of computer systems, networks and data with support for cloud computing e.g AWS, Azure e.tc.

Confidential, TX

Graduate Research Assistant

Responsibilities:

• Responsible for various research not limited to industrial control applications, FPGA, PLC, HMI, DCS, Filters & drive systems

• Diagnosed and solve system/software problems, install applications software as related to research needs and development
• Analyzed research thru presentations &databases as related to FPGA & PLC implementation on Motor & Conveyor module
• Assembled, tested, documented, and maintain circuitry of electronic control systems according to engineering instructions and technical manuals using test instruments.
• Utilized Failure Mode and Effects Analysis (FEMA) and Root Cause Analysis (RCA) to identify equipment failure modes, determine the effects, identify, and prioritize actions to reduce the risk of failure and improve detection.

Confidential

Network Control & Instrumentation Engineer/Intern

Responsibilities:

• Responsible for designing, developing, installing, testing, managing equipment used to monitor and control engineering systems & machinery using EPLAN and other tools.

• Designed schematic and P&ID using EPLAN for IS & non-IS systems to control specific aspects of an operating plants
• Produced and reviewed design e.g. process flow diagrams, device tags, instrument loops, instrument index etc.
• Carried out extensive Factory Acceptance Test FAT) and Site Acceptance Test (SAT) for completion purposes
• Knowledge of control and industrial communication systems and standards like Modbus, Profibus, (Ethernet, ControlNet, DeviceNet), temperature sensors, valve, NEC, IEC, ISA, FEMA, IEEE, ANSI and API standards
• Set up & programmed control systems like PLC hardware, HMI development, managing I/O lists

Confidential

Network Security Testing & Validation Engineer

Responsibilities:

• Tested, validated, and monitored SeaONYX Blowout Preventer Control system and operate within standard

• Designed and specified instruments to indicate process plant and produced detailed documents including I/O lists
• Wrote and developed programs to automate and monitor and communicate any quality alerts as necessary
• Interfaced with GE Proficy Cimplicity HMI software to monitor, calibrate and evaluate GE Mark Vie control system & Root cause FA, FMEA report analysis
• Maintained strong, effective working relationships with vendor engineering resources
• Carried out extensive Factory Acceptance Test FAT) and Site Acceptance Test (SAT) for completion purposes

Confidential, Houston, TX

Responsibilities:

• Maintenance and daily upkeep in the lab by insuring that the labs systems are functioning properly

• Analyzed, troubleshooting and correcting BOP problems remotely and on-site and provided end user training
• Performed and analyzed basic and advanced testing for product development activities in the Engineering Lab.
• Programmed Allen Bradley PLC, knowledge of DCS, NEC, IEC, ISA, FEMA, IEEE, ANSI, API and industry standards.
• Applied ASPENTech InfoPlus.21 to collect and store process data for analysis and reporting for production
• Performed and completed Lab Work Requests (LWR) assigned by the Lab Supervisor on GE Mark Vie Control System and other third party supported tools.

Confidential

Test Technician

Responsibilities:

• Responsible for testing, analyzing & interpretation of manual, data, schematics, and documentation of test procedures.

• Set up and tested all aspects of the product/system and checked orders and specifications to determine work procedure
• Applied ASPENTech InfoPlus.21 to collect and store process data for analysis and reporting for production
• Tested existing product changes, new product developments and Analyzed weekly data test results
• Used existing tools and techniques to execute test and script new tools for performing testing/validation function.
• Troubleshoot, performed reliability and FMEA to identify root cause of issues and possible resolution techniques
• Recommended and developed improved testing processes and techniques
• Programmed Allen Bradley PLC and knowledge of DCS, NEC, IEC, ISA, FEMA, IEEE, ANSI and API standard