SUMMARY:

• 10 years’ experience in Hardware Board Design based on Digital, Analog and mixed circuit. Proficient in designing complex high speed board design based on FPGAs/CPLDs, PowerPC, ARM Processor, DDR, Micro - controller as well as layout guideline methodology and signal integrity, Worst Case circuit analysis (WCA), logic & timing simulation.
• Hands on experience on VHDL/Schematic entry, Schematic design using ORCAD/Altium/DxDesigner, Simulation tools like PSpice, LTSpice Simcad and directing PCB layout using Mentor Tools Expedition & Cadence tools Allegro, hardware board bring-up, testing & debugging, design verification & validation, BOM preparation include component selection, documentation for design & production.
• Experience in design, development and testing of FPGAs/CPLDs (Altera Devices) using Quartus II Design software based H/W boards for systems & products.
• Experience in Schematic design using ORCAD, DxDesigner and Altium.
• Experience in PCB layout directing and board viewer using Cadence Tools Allegro, Mentor Tools Expedition and UPD Sigrity.
• Experience in Simulation tools like PSpice, Simcad, LTSpice
• Experience in Digital, Analog and mixed signal hardware designing.
• Experience in worst case circuit analysis (WCA)
• Experience in high speed board design for multilayer board keeping signal integrity concept for impedance controlled PCB design.
• Experience in design of Industrial products with Industrial protocols like PCI, I2C, SPI, QSPI, USB, OTG, CAN, Flex ray, Ethernet-MII,RMII GMII, JTAG, E1/T1, UART-RS232 & RS485, ARINC429 etc.
• Experience in processor & Micro controller based design like 8/16/32/64 bit processor/PowerPC/DSP.
• Experience in Debugging and diagnostics using oscilloscope, MSO, Logic analyzer
• Design validation (DV), Product Validation (PV), DFMEA, FTA, HW metrics analysis and Testing for production.
• Experience in EMI/EMC design guidelines.
• Experience in Power supply design for various electronics systems.
• Experience in Firmware debugging & System integrations with Hardware & Software.

TECHNICAL SKILLS:

Tools: Quartus II V8.2-(Altera), ORCAD, Allegro & Expedition PCB, Altium Design, VHDL, PSpice, Simcad, Cadence Allegro Viewer, Sigrity UPD Design viewer, Keil Complier, DxDesigner, SDK, Xilinx ISE, Code Composer, Green Hills Debugger, DOORS etc.

Processors/Controllers: LPC2132, PIC24F256G106, STM8S207K6, SPC560, Cygnal 8050F000, PowerPC Processor 8560, 8540, 8260, TMS320DM8148, Zynq7020, MobilEye EyeQ3, ARM966E, K10 MCU etc.

Testing Tools: Logic Analyzer, Oscilloscope (MSO and DSO), digital multimeter etc

EMPLOYMENT:

Confidential

Sr.Technical Lead

Responsibilities:

• Responsible for Hardware board design includes requirement capture, hardware architecture, High-level design, component selection, and Schematic design entry, PCB layout guidelines for stack-up, placement and routing.
• Preparation of documentation for design, testing and production.
• Hardware board bring-up, testing and debugging for various board for their functionalities.
• Team coordination for Hardware engineer and PCB Engineer.

Confidential, MI

Skill Used: DxDesigner and Expedition Mentor Tools, LTSpice, Corlis Tool, Green Hills Debugger etc

Responsibilities:

• Schematics design and Layout guidance.
• Design review and prepared list of ECN changes.
• Test Plan preparation.
• Script development to test hardware boards using Corelis Tools.
• Brought up all the hardware modules and debugged each of them for their functionality
• “Hardware development of Integrated Module Control (IMC) for Aerospace”.

Confidential, NY

Skill Used: DxDesigner and Expedition Mentor Tools,LTSpice, Green Hills Debugger etc

Responsibilities:

• Design analysis to meet product requirement & brought up all the hardware modules and debugged each of them for their functionality.
• Prepared documentation for Interface control document and detail test procedure.
• Design review and prepared list of ECN changes.
• Design validation as per requirement and system integration testing.
• Written low level script to test hardware boards using Green Hills Debugger.
• Accuracy testing for system to meet product requirement.
• “Hardware Design analysis of DAS camera S-CAM3”.

Confidential, TRW, MI

Skill Used: DxDesigner and Expedition Mentor Tools,LTSpice.

Responsibilities:

• Design analysis for their functionalities and requirement.
• Design analysis for their fault analysis and detection for functional safety requirement as per ISO26262.
• Prepared design change note for circuits
• Prepared documentation for testing and done testing for fault insertion for safety analysis.
• “Design and development of Driver Assistance System (DAS) for Stereo Vision Camera”.

Confidential

Sr.Technical Lead

Skill Used: DxDesigner and Expedition Mentor Tools,LTSpice, Isograph etc

Responsibilities:

• Designed from product requirement & brought up all the hardware modules and debugged each of them for their functionality.
• Prepared documentation for design, testing and production.
• PCB fitment study and placement feasibility analysis with mechanical team.
• Conduct design reviews and implementing the review comments.
• Preparation of layout constraints and coordinating with layout team.
• Board bring up, design validation and system integration testing
• Worst case Analysis for various circuits and DFMEA.
• Thermal analysis for entire product.
• Fault Tree Analysis (FTA) using Isograph
• “Design and development of DAS camera for fleet management system.”

Confidential

Sr.Technical Lead

Skill Used: DxDesigner and Expedition Mentor Tools, LTSpice.

Responsibilities:

• Designed from product requirement & brought up all the hardware modules and debugged each of them for their functionality.
• Integrated the system along with the firmware for all functionality of the device
• Prepared documentation for design, testing and production.
• PCB fitment study and placement feasibility analysis with mechanical team.
• Board requirement capture and High level design analysis.
• Power supply design and simulation.
• Schematics entry and Layout support
• Worst case Analysis for various circuits.
• Thermal analysis for entire product
• Design and development of Evaluation Mother & daughter board and DASLIP.

Confidential

Skill Used: ORCAD, Allegro, Sigrity UPD Design viewer, Quartus Design (Altera).

Responsibilities:

• Designed from product requirement & brought up all the hardware modules and debugged each of them for their functionality.
• Integrated the system along with the firmware for all functionality of the device
• Prepared documentation for design, testing and production.
• Design analysis for SIP and Schematic Entry, PCB Layout guidance.
• CPLD Implementation, Compilation, Synthesis and Simulation
• Thermal Analysis for SIP packaging
• Power supply design DC-DC Convertor and simulation.
• Board bring up, debugging and Functional testing.
• Design and development of Data acquisition systems.

Confidential

Skill Used: ORCAD, PSpice, SimCad, FilterPro, Allegro, Quartus Design.

Responsibilities:

• Designed from product requirement & brought up all the hardware modules and debugged each of them for their functionality.
• Prepared documentation for design, testing and production
• Design analysis and Schematic Entry, PCB Layout guidance.
• Filter design and simulation using FilterPro.
• Amplifier design and simulation using PSpice, SimCad
• “Product Development & Testing of Integrated Control Card.”

Confidential

Skill Used: Quartus Design software, Allegro, BDI Debugger, MSO, Keil Software

Responsibilities:

• Designed from product requirement & brought up all the hardware modules and debugged each of them for their functionality.
• CPLD Implementation, Compilation, Synthesis and Simulation.
• Design analysis and Schematic Entry, PCB Layout guidance.
• Integrated the system along with the firmware for all functionality of the device
• Prepared documentation for design, testing and production
• Designing of power supply with DC-DC converter
• “Design & Development of Control Board.”