SUMMARY

• 8 years of experience in Networking, including hands - on experience in providing network support, installation and analysis for broad range of LAN/WAN/MAN communication systems.
• Proficient in Cisco IOS for configuration & troubleshooting of routing protocols: MP-BGP, LDP, EIGRP, RIP, OSPF, MPLS and BGP v4.
• Excellent knowledge in Routing, Switching, Firewall and Gateway technologies, system design, wireless design, data network design, capacity management and network growth.
• Hands on experience in installing, configuring, maintaining and troubleshooting Cisco Switches, Cisco Routers, Juniper EX Switches, Juniper Routers and Cisco Nexus Switches.
• Involved in troubleshooting of DNS, DHCP and other IP conflict problems.
• Responsible for Check Point and Cisco ASA firewall administration across global networks.
• Experience in working with Cisco Nexus Switches and Virtual Port Channel configuration.
• Knowledge of implementing and troubleshooting complex layer 2 technologies such as VLAN Trunks, VTP, Ether-channel, STP, RSTP and MST.
• Implementation of HSRP, VRRP and GLBP for Default Gateway Redundancy.
• Experience in testing cisco routers and switches in laboratory and deploy them on site production.
• Expert level knowledge on OSI model and TCP/IP protocol suite.
• Worked on Network Topologies and Configurations, Routers, Frame Relay, Token Ring, ATM, Bridges, Switches, Hubs and Repeaters.
• Strong knowledge of TACACS+, RADIUS implementation in Access Control Network.
• Experience in Designing and assisting in deploying enterprise wide Network Security and High Availability Solutions for ASA.
• Worked extensively in Configuring, Monitoring and Troubleshooting Cisco's ASA 5500/PIX security appliance, Failover DMZ zoning & configuring VLANs/Routing/NATing with the firewalls as per design.
• Worked on Extensively on Cisco Firewalls, Cisco PIX (506E/515E/525/) & ASA 5500(5510/5540) Series.
• Responsible for Checkpoint and Cisco ASA firewall administration across our global networks.
• Strong knowledge of Cisco and Juniper software (IOS/XR and JunOS) and hardware.
• Installation, configuration, and management of WAN optimizer, Riverbed Steelhead.
• Experience with hardware load balancer administration and support, preferably with F5 and Cisco ACE load balancers.
• Experience with convert Checkpoint VPN rules over to the Cisco ASA solution. Migration with both Checkpoint and Cisco ASA VPN experience.
• Experience with Brocade switch
• Experience in layer-3 Routing and layer-2 Switching.
• Experience with VOIP and QOS implements and support.
• Experience in installing and configuring DNS, DHCP server.
• Good Knowledge in troubleshooting issues on NAT.
• In depth understanding of Ipv4 implementation of subnetting
• Experience with Putty, Exceed, Secure CRT, GNS 3 and Cisco Packet Tracer.
• Adept in preparing Technical Documentation and presentations using Microsoft VISIO/Office.
• Ability to Install, Manage & Troubleshoot Large Networks & Systems Administration on Windows & Linux platforms in Development, Lab & Production Environments.
• Excellent customer management/resolution, problem solving, debugging skills and capable of quickly learning, effectively analyzes results and implement and delivering solutions as an individual and as part of a team.

TECHNICAL SKILLS

Network Configuration: Advanced switch/router configuration (Cisco IOS access list, Route redistribution/propagation).

Routing Protocols: RIPV1, RIPV2, IGRP, EIGRP, OSPF, BGPv4, MP-BGP, Redistribution, Summarization, and Static Routing.

WAN Protocols: HDLC, PPP, MLPPP

Circuit switched WAN: T1/E1 - T3/E3/OCX (Channelized, Fractional & full).

Packet Switched WAN: ATM, FRAME RELAY, MPLS, VPNs

Security Technologies: Cisco FWSM/PIX/ASDM, Nokia Checkpoint NG, Juniper SRX, PAP, CHAP, Cisco PIX, Blue Coat

Cisco Routers: Cisco GSR 12416, 12418, Cisco 7200vxr, Cisco 3640, Cisco 3600

Cisco Switches: Cisco 2960, Cisco 3560, Cisco 3750, Cisco 6500 series

Juniper EX Switches: EX8200, EX4500, EX4200, EX3200, EX2500, EX2200 Series

Juniper Routers: E, J, M and T- Series

Cisco Nexus Switches: Cisco 7010, Cisco 7018, Cisco 5020, Cisco 2148, Cisco 2248

Layer 3 Switching: CEF, MLS, Ether Channel

Layer 2 technology: VLAN, VTP, VMPS, ISL, dot1q, DTP, Spanning-tree, PVST

Physical interfaces: Fast Ethernet, Gigabit Ethernet, Serial, HSSI, Sonet (POS)

Redundancy and management: HSRP, RPR, NSF/NSR

QOS: CBWFQ, LLQ, WRED, Policing/Shaping.

VoIP Devices: Cisco IP phones, Cisco 5500, 6500 series controller, Avaya 3000, 6000, 7200 series Controllers

Switches: Catalyst 6500, MSFC, MSFC2, 7600, 3700, 3500

LAN Technologies: Ethernet, Fast Ethernet, Gigabit Ethernet, & 10 Gigabit Ethernet, Port- channel, VLANS, VTP, STP, RSTP, 802.1Q

WAN Technologies: Frame Relay, ISDN, ATM, MPLS, leased lines & exposure to PPP, HDLC, and CSU/DSU

Protocols: TACACS+, RADIUS.

Gateway Load Balancing: HSRP, VRRP, GLBP, EBGP

Network Management Tools: Wireshark, Netflow Analyzer, Cisco Works, Ethereal, SNMP, HP open view, SM, SM9, Traverse, Infoblox, Infoblox net MRI,Infoblox Grid Manger, Cisco NCS, Cisco prime infrastructure, Cisco ACS

Facilities: DS0, DS1, DS3, OCX, T1/T3

Firewall & Security: ASA Firewall (5505/5510),Checkpoint, Cisco ASA, juniper net screen(500/5200), Juniper SRX (650/3600), Pix(525/535), McAfee Web Gateway, Checkpoint (R62, R65, R70, NGX), Palo Alto, Juniper SRX, Fortigate5000-series, Cisco ASA 5500-X (Fire power)

Load Balancers: Cisco CSM, F5 Networks (Big-IP)

WAN Optimizer: Riverbed Steelhead Appliance

IPSEC/VPN Configuration: PIX to Router, Router to Router, PIX to VPN wildcard client, Router to VPN wildcard client, PIX to PIX, fully meshed configurations

Cabling: CAT 5, CAT 5e, CAT 6, CAT 6a

Programming Languages: C, C++,Verilog, Matlab

Operating Systems: Microsoft XP/Vista/7, UNIX, Linux (Redhat, OpenSuse, Fedora) Windows Servers 2003/2008, Windows MS-Office

PROFESSIONAL EXPERIENCE

Confidential, Alpharetta, GA

Sr. Network Engineer

Responsibilities:

• AS successful Network Engineer my Support is responsible for the support of the all physical network system and the hardware used to establish the WAN connectivity at each location.
• This includes providing tactical and strategic input on overall network planning and related projects
• I am responsible for support of all data and voice cabling within each branch as well as the support of the routers and switches that are used for communications at each location.
• Responsible for documenting the infrastructure for each location, the Network Engineer develops processes and procedures that will ensure that documentation is up-to-date and accessible.
• Ialso review the infrastructure at each location to ensure compliance to corporate standards and cost effectiveness
• Responsible for working with customers and vendors on making sound judgments, prioritizing and resolving issues in an appropriate and timely manner.
• Assist network and/or server administrators, desktop support and end users with resolving problems and restoring the system back to a working configuration. Provide the necessary written instructions or revised documentation for problem resolutions
• Evaluates new technologies and makes recommendations for new standards
• Provide daily verbal or e-mail updates of issues that may affect project target dates.
• Provide a weekly written status of current projects and critical issues
• Responsible for all cabling, patch panels and rack infrastructure design and management in data rooms throughout the organization
• Selecting vendors to perform cabling and hardware installations and maintenance activities based on requirements, company standards and cost
• Migrating from Dell and Adtrans to Cisco Networks
• Implemented and maintained Big-IP F5 load balancing solution across multiple datacenter’s
• Configured inside ACL and interfaces, outside ACL and interfaces.
• Worked on Core switch migration in data center (3650 ), which supports cloud.
• Experience working on Cisco 3500, 3800, 4500 and 6500 series access layer switches
• Involved in RE-IP project of migrating ports from old vlans to new data and voice vlans.
• Experience with solar winds network management tool for access and distribution layer of switch
• Worked on access, trunk, HSRP, GLBP, GRE tunnel migration of all access layer switches throughout all campuses.
• Worked closely with the migration project team and helped them with all medical devices, computers and IPphone migrations as well as identifying and documenting network changes needed to be done.
• Port migration and troubleshooting on Cisco 3500, 3800, 4500, 6500 switches. Designing MLAN projects. Adding data center switches
• Project involved RE-IPof a 6 building campus, reconfiguration of 90 closet switches using GBIC Backbones, 140 new VLans and routing advertisement
• Supporting remotely large environmental different locations.
• Worked on change Management process, SM9. (HP)
• Provision a plethora of routers, switches and network interface devices (NIDs) to Traverselayer II traffic across the FNC footprint.
• Supported Infobloxappliances grid environment for DNS, DHCP and IP Address Management tools (IPv4), for the State Farm enterprise network.
• Worked on creating and maintaining new subnets, host with several record entries like CNAME, PTR, A, etc) with DHCP scopes using Graphical User Interface as well as IBCLI (Infoblox command line interface).
• Managing the changes through export/import of CSV spreadsheets on Infobloxweb interface.
• Worked on Infoblox. Network control with secure DNS, DHCp and IPAM
• Knowledge of implementing and troubleshooting complex layer 2 technologies such as VLAN Trunks, VTP, ISL/ 802.1q, Ether channel, Port Security, STP, RSTP and MST.
• Extensive experience in Layer 3 routing and Layer 2 switching. Experienced dealing with router configurations like 7200, 3800, & 2800 and switches 6500, 4500, 3750, 2900 and 3500XL series
• In depth understanding of IPV4 and implementation of Sub netting.
• Well Experienced in configuring protocols HSRP, ICMP, IGMP, PPP, PAP, CHAP, and SNMP.
• Experienced in DNS, DHCP, SMTP, FTP, HTTPS and web security architecture.
• I was part of Data Center design and build team. As part of data center refresh project, I performed migration from Cat 6513 Switches with Sup 720 and WS-X6148A-45AF Line cards of version Cisco IOS Release 12.2(33)SXI2 to Nexus 7009 and 7018 Switches with Nexus 7000 Supervisor 2E, N7K-F312FQ-25 F3, N7K-M206FQ-23L M2 line cards of version NX-OS Release 5.2(1), Nexus 5548UP Switch and Nexus 2232TM-E Switches.
• Responsible for entire LAN and WAN maintenance and troubleshooting of the companynetwork. Involved in the Team of Data Center Level 2 support to perform duties like deployment and troubleshooting of Cisco Routers Switches, Load balancer and Firewalls according to the organization requirements.
• Configure various LAN switches such as CISCO 2900, 3550, 4500, 6509 switches and Access layer switches such as Cisco 4510, 4948, 4507 switches for VLAN, Fast Ether Channel configuration.
• Configured Site-to-Site IP sec VPN tunnels to peer with different clients and each of client having different specifications of Phase 1 and Phase 2 policies using Cisco ASA 5500 series firewalls.
• Configure Virtual Servers, Nodes, and load balancing Pools in F5 Big IP LTM.
• Configured routers and coordinated with LD Carriers and LECs to turn-up new WAN circuits. Configuring, Maintaining the Routers and Switches and Implementation of RIP, EIGRP, OSPF, BGP, QOS routing protocols and troubleshooting.
• Configuration and troubleshooting of EIGRP, OSPF, BGP.
• Design OSPF areas for reliable Access Distribution and for Core IP Routing.
• Extensively used TCP/IP tool like TELNET for remote login to the routers and SSH for secure login.
• Has expertise in LAN/WAN technologies (fast Ethernet, Layer2 & 3 switched/routed LAN, and Frame Relay).
• Configure various LAN switches such as CISCO CAT 2900, 3550, 4500, 6509 switches.
• Configuring access layer switches such as Cisco 4510, 4948, 4507 switches for VLAN, Fast Ether Channel configuration.
• Configured and troubleshooting Juniper devices such as Juniper MX960, Juniper SRX, EX Series Routers and Switches
• Group Bridge, WIPS, ISE/Prime/PI/CMX, VoIP, QoS, etc..
• Wi-Fi / Software DevTest Engineer. Performance testing and configuring of wireless LAN Controllers (CiscoIOS-XE & Aironet) with Spirent, Ixia and VeriWave.
• Wireless (802.11 / Wi-Fi) testing and debugging of Ciscoclients, passive clients, CiscoWork Group Bridge (WGB), voice, CiscoVoIP clients (7921, 7925, 7940, 7970 phones), video, Ciscowireless security (WIPS WIreless Intrusion Prevention - AirMagnet), Cisconetworking, scale and performance.
• VoIP testing and configuring of CiscoCall Manager, handsets, wireless (802.11 / Wi-Fi) and wired hard phones and soft clients, VoIP protocols. Setup CiscoVoIP testbed and generate VoIP traffic with softphones, Ixia VeriWave, etc. experience working on CiscoWireless (Wi-Fi) Controllers and Access Points, Wi-Fi Clients, Work
• Maintain Cisco Network switches, routers and Palo Alto firewalls
• Troubleshooting utilizing tools such as Cisco call manager, NetCool, NCCM, WWOLSR, Palo Alto, Splunk, BMC Remedy, etc.
• Architect and design networks for Web security with Checkpoint, Palo Alto Network, Cyberoam, Sonicwall, ASA, Watchguard,
• Install, Configure and Manage Layer 7 Palo Alto networks firewall - Pan 2050 with UTM

Environment: Cisco 2948/3560/4500/3560/3750/3550/3500/2960, 6500 switches and Cisco 3640/12000/7200/ 3845/3600/2800 routers, Cisco Nexus 7K/5K, Cisco ASA 500, Juniper Routers and Switches, windows server 2003/2008: F5 BIGIP LTM, RIP, OSPF, BGP, EIGRP, LAN, WAN, VPN, HSRP, IDS, HP, SM9, SM, Traverse.

Confidential, Atlanta, GA

Sr. Network engineer

Responsibilities:

• Configured and deployed VDC and VPC between Nexus 7018 and Nexus 5548 switches along with FEX 2248. Deployed Horizontal connectivity using OTV. Have a good understanding of Fabric Path.
• Proficient hands on experience in configuring Cisco Catalyst 2900,2960, 3560, 3750, 4500, 4900, 6500series and Nexus 2248, 5548 and 7010 switches.
• Involved in the troubleshooting aspects of complex network infrastructure using the routing protocols like EIGRP, BGP.
• Worked on multiple issues like troubleshooting CE side VRFs and routing issues with BGP multi-homing across multiple MPLS Clouds.
• Experience working with 2600, 2900, 3600, 3900, 7200, 7600 series Cisco Routers.
• Expertise in Layer-2 Ethernet Switching deployment with technologies like STP, RSTP, PVST, RPVST along with trouble- shooting of inter-VLAN routing and VLAN Trunking using 802.1Q. Hands on troubleshooting experience with First Hop redundancy protocol like HSRP and GLBP.
• Worked extensively on Cisco ASA 5500(5510/5540) and experience with deploying rules to the Cisco ASA solution
• Manage project task to migrate from Cisco ASA firewalls to Check Point firewallsR 75
• Involved in migration of Cisco Pix firewall to Cisco ASA
• Involved in Configuration of Access lists (ACL) on ASA firewall for the proper network routing for the B2B network connectivity
• Experience with convert Checkpoint VPN rules over to the Cisco ASA solution. Migration with Cisco ASA VPN experience
• Worked extensively on Cisco ASA 5500(5510/5540) Series, experience with convert PIX rules over to the Cisco ASA solution.
• Worked on datacenter migration of existing PIX firewall to ASA firewall, PIX OS upgrade from 6.3 to 7.0.
• Worked extensively on Cisco ASA 5500(5510/5540) Series, experience with convert datacenter PIX rules over to the Cisco ASA solution
• Worked on extensive on Cisco ASA Fire power 5500-X(5506-X, 5506W-X,5508-X and 5516-X)
• Design, Implement & troubleshooting of Juniper switches, routers and FirewallsEX-2200, EX-4200, EX-4500, MX-480, M Series, SRX210, SRX240,SRX3600/650.
• Configuring and implementation of Juniper Firewall, SSG Series, Netscreen Series ISG 1000, SRX Series.
• Implementation of Site-to-Site VPNs and DMVPN over the internet using IKE Phase 1 and IKE Phase 2 based on traffic with ASA 5500 series Firewalls.
• Deployed Palo Alto Firewalls for web filtering and application control.
• Extensive use of NSM (Network and Security Manager),FortiOS 5 and CSM (Cisco Security Manager) for adding or modifying firewall policies for the firewalls in use
• Implemented site to site VPN in Juniper SRX as per customer.
• Implemented various EX, SRX & J series Juniper devices.
• Design and configuring of OSPF, BGP on Juniper Routers and SRX Firewalls.
• Strong working experience on Cisco ASA 5540 Series that includes rule deployment, configuration using Network & Port objects. Deployment of DMZ and troubleshooting ASA Cluster failovers.
• Performed load balancing and application level redundancy by deploying F5 BIG-IP LTM 3900.
• Involved in the configuration and maintenance of IPSec Site-Site VPN.
• Performed basic security and ACL administration on Juniper SRX firewalls. That includes day to day rule deployment, troubleshooting using data flow analysis and packet capture.
• Planned and implemented network designs, including WAN, LAN, MPLS.
• Background in network design, including Wide Area Networking (WAN), Local Area Networking (LAN), Multiple Protocol Labeling Switching (MPLS), DS3.
• Actively involved in fault management and change management of the network in order to provide high availability.
• Involved in the design and installation of Branch network systems, also maintained network documentation using VISIO.
• Responsible for entire LAN and WAN maintenance and troubleshooting of the company network.
• Involved in the Team of Data Center Operations to perform duties like administration and deployment of Cisco Routers and Switches according to the organization requirements and assisting with network capacity and high availability requirements.
• Involved in project planning and reviewing based on the requirements and deploying within the existing network. Used Riverbed appliance for Bandwidth optimization and application acceleration.
• Trouble-shooting duplex mismatch errors with steel head appliance.
• Reviewing all changes to network configuration for technical accuracy and provide solutions to Multi-Protocol Network problems.
• Configured and managed VLANs, 802.1Q Trunk, RPVST+, Inter-VLAN routing, HSRP and LAN security for Layer-2 and Layer-3 switching domains as per the organization's requirement plan. IP Allocation for all applications and servers with high availability throughout the company.
• Configured ASA 5540 to ensure high-end security on the network with ACLs and Firewall. Assigned a security level (0-100) on Cisco ASA and the number vary with the trust issues.
• For trusted it is 100 and less trusted it is 0. Worked with firewall SRX550 services gateway security for routing, switching and WAN connectivity.
• Used IPSec VPN tunneling to provide access to user machines and partners in other network.
• Provided application level redundancy and availability by deploying F5 load balancers LTM.
• Involved in designing and commissioning WAN infrastructure for redundancy in case of link failure.
• Responsible for technical evaluation, troubleshooting, overall project management, problem solving and turn-up of the service with the ISP.

Environment: RIP, OSPF, BGP, EIGRP, VLAN, MPLS, F5 Load Balancer 6400, STP, RPVST, LAN, WAN and HSRP, Juniper SRX, Juniper EX, LAN, WAN, VPN, DNS, DHCP, FTP, HTTP, CISCO ASA 5540,Cisco ASA 5500-X Fire power Juniper- net Screen 5200/500,EX-2200, EX-4200, EX-4500, MX-480, M Series, SRX210, SRX240, SRX3600/650, Checkpoint, Fortigate 5000-series windows server 2003/2008:

Confidential, Charlotte, NC

Sr. Network Engineer

Responsibilities:

• Working in high availability Nexus Environment and provide Level 3 Network Support.
• Configuring, upgrading and verifying the NX-OS.
• Basic and advanced F5 load balancer configurations, general troubleshooting of the F5 load balancers.
• Modified internal infrastructure by adding switches to support server farms and added servers to existing DMZ environments to support new and existing application platforms.
• Analyzed customer application and bandwidth requirements, ordered hardware and circuits, and built cost effective network solutions to accommodate customer requirements and project scope.
• Cisco ASA/Checkpoint Firewall troubleshooting and policy change requests for new IP segments that either come on line or that may have been altered during various planned network changes on the network
• Configuration and management of NEXUS network in the existing network infrastructure.
• Created LAB setup with 7k and 5K NEXUS switches for application testing.
• Hands on experience with Nexus Switches 2K.
• Involved in the deployment of Cisco Nexus 7k, 5k and 2K along with ASR 9K, 6509s (Sup 720), Cisco 4900, 3750, 2960 switches.
• Experience configuring VDC,VPC in Nexus 7010
• Provided firewall policy configuration and services with Juniper SRX 240 & 650 service gateways
• Understanding the JUNOS platform and worked with JUNOS upgrade of Juniper devices
• Troubleshoot and Worked with Security issues related to Cisco ASA, andIDS/IPS firewalls
• Perform Wireless Administration and troubleshooting for the corporate Wireless infrastructure.
• Build Logical design and Implementation of Wireless Solution
• Responsible forCheckpointand Cisco ASA firewall administration across global networks
• Experience working with Juniper EX-Series Ethernet Switches
• Experience working with Juniper SRX Series
• Configured routers and coordinated with LD Carriers and LECs to turn-up new WAN circuits.
• Providing Level 3 support to customers, resolving issues by attending to conference calls.
• Providing Level 3 Engineering and Support to other internal network engineers and contractors.
• Designing and installing new branch network systems. Resolving network issues, running test scripts and preparing network documentation.
• Performed OSPF, BGP, DHCP Profile, HSRP, IPV6, and Bundle Ethernet implementation on ASR 9K redundant pair.
• Actively participated in upgrading fast Ethernet, Layer 3 switched/routed LAN infrastructure from Cisco 3640 to Cisco 2811 ISR routers and switches at access level to 2950, 3550.
• Configured various Router interfaces like ATM interface, T3 & Channelized T1 interfaces
• Configuring and troubleshooting CISCO catalyst 6509, 7609, 7613 with Supervisor cards, Cisco 3640, Cisco GSR 12416,21418(with PRP and RPR processors)
• Excellent Troubleshooting Skills and Customer Centric approach.
• Working with BGP, OSPF protocols in MPLS Cloud.
• Providing daily network support for national wide area network consisting of MPLS, VPN and point-to-point site.
• Configuring HSRP between the 3845 router pairs of Gateway redundancy for the client desktops.
• Configuring GLBP, VLAN Trunking 802.1Q, STP, Port security on Catalyst 6500 switches.
• Responsible for service request tickets generated by the helpdesk in all phases such as troubleshooting, maintenance, upgrades, patches and fixes with all around technical support.
• Configuring BGP, MPLS in Cisco IOS XR.
• Configuring Virtual Device Context in Nexus 7010.
• Configuring multiple route reflectors within a cluster.
• Working on HP open view map for Network Management System and Ticketing
• Worked on extensive on Cisco ASA fire power 5500-X(5525-X,5555-X,5585-x)
• Involved in Configuration of Access lists (ACL) on ASA firewall for the proper network routing for the B2Bnetwork connectivity.
• To secure configurations of load balancing in F5, SSL/VPN connections, Troubleshooting CISCO ASA firewalls, and related network security measures.
• Designed and implemented DMZ for Web servers, Mail servers & FTP Servers using Cisco ASA5500 Firewalls.

Environment: Cisco 2948/3560/4500/3560/3750/3550/3500/ 0 switches and Cisco 3640/ 0/3845/3600/2800 routers, Cisco Nexus 7K/5K/2K, Cisco ASA5510,Cisco ASA 5500-X fire power Checkpoint, windows server 2003/2008: F5 BIGIP, LTM, OSPF, EIGRP, RIP, BGP, VLAN, VPN, Checkpoint, Juniper SRX

Confidential, Lees Summit, MO

Network Engineer

Responsibilities:

• Understanding project requirements and implementing the projects by gathering requirements from customers.
• Network design and architecture like device planning and capacity planning.
• Configuring Cisco 7600, 7200 series routers with dynamic routing protocols like BGP, OSPF and EIGRP
• ISP links monitoring and performing changes in the network devices.
• Configuring Cisco 4506, nexus 2K and brocade switch based on customer requirement
• Support the brocade vcs fabric and brocade ip fabric
• Support the brocade vdx data center switch
• Install the brocade EZ switch setup
• Deployment and troubleshooting with Brocade fabric vision technology
• Configuring ACL s to provide internet access and to advertise in ISP AS numbers.
• Configuring HSRP and VRRP to provide redundancy in the network level.
• Securing network by implementing firewalls and allowing access based on customer request.
• Configuring the Fortigate, Cisco and Sonicwall firewall models.
• Configuring VPN s like SSL, IPSEC vpn s for access servers through secure channel.
• Natting and patting the IP s to access servers from internet.
• Experience working with Cisco ASA 5585-X firewalls with Firewall rules, IPSEC VPN, NAT, Active-Standby Failover, OSPF and Any Connect VPN technologies
• Experience working with Nexus 7k, 5K, 2K with VPC, VDC, ISSU Software upgrades
• Working with Juniper JUNOS operating system and working on M/ MX/ series routers. And SRX devices
• Designing, Installation and configuration on Checkpoint, ASA, Net Screen and Juniper Firewalls
• Providing security by configuring three layer setups in network devices.
• Configuring Cisco, D-link and HP switches for server’s connectivity.
• Configuring HA setups from end to end setup.
• Providing LB servers on application layer on shared devices boarding number of customers.
• Worked on Radware and F5 devices.
• Providing WAF services to provide application level security by adding WAF services.
• Closing the tickets with in the SLA timelines.
• Generating the devices availability reports through MRTG.
• Project documentation and Network architecture with L3, L2 and data flow diagrams.
• Resolving all network related issues.
• Performing addition/modification in network devices without effecting existing setups.
• Following ITIL process.

Environment: Cisco 00 / 3600 Cisco 60 series switches, Cisco Routers 7000, 5300, 4000, 2500, 3000, 2600, NAT, PAT, DHCP, DNS, OSPF, EIGRP, ASR, TCP/IP, LAN, WAN, Fort iGATE, CISCO and Dell SonicWALL Firewalls.

Confidential, PA

Network Engineer

Responsibilities:

• Created scripts to monitor CPU/Memory on various low end routers in the network.
• Installed and maintained local printer as well as network printers.
• Completed service requests (i.e. - IP readdressing, bandwidth upgrades, IOS/platform upgrades, etc.)
• Identify, design and implement flexible, responsive, and secure technology services
• Modified internal infrastructure by adding switches to support server farms and added servers to existing DMZ environments to support new and existing application platforms.
• Providing support to networks containing more than 2000 Cisco devices.
• Performing troubleshooting for IOS related bugs by analyzing past history and related notes.
• Carrying out documentation for tracking network issue symptoms and large scale technical escalations.
• Ensure Network, system and data availability and integrity through preventive maintenance and upgrade.
• Involved in L2/L3 Switching Technology Administration including creating and managing VLANs, Port security, Trunking, STP, Inter-Vlan routing, LAN security.
• Worked on the security levels with RADIUS, TACACS+.
• Managing the service request tickets within the phases of troubleshooting, maintenance, upgrades, fixes, patches and providing all-round technical support.
• Commissioning and Decommissioning of the MPLS circuits for various field offices.
• Preparing feasibility report for various upgrades and installations.
• Configured switches with port security and 802.1 xs for enhancing customer’s security.
• Monitored network for optimum traffic distribution and load balancing using Solar winds.
• Validate existing infrastructure and recommend new network designs.
• Configuring and troubleshooting multi-customer network environment.
• Involved in network monitoring, alarm notification and acknowledgement.
• Implementing new/changing existing data networks for various projects as per the requirement.
• Troubleshooting complex networks layer 1, 2to layer 3 (routing with MPLS, BGP, EIGRP, OSPF protocols) technical issues.
• Handled installation of Windows NT Server and Windows NT Workstations.
• Handled Tech Support as it relates to LAN & WAN systems

Environment: Cisco 7609S series routers, Cisco 2900 routers, 6513E switches, Check point firewall, Radware Appdirector.