OBJECTIVE To obtain full-time employment where my education and experience could be best utilized.

Work History

May 2008 – july 2011 Confidential 
RMS ENGINEER ( contract)
Provided helicopter reliability, maintainability and safety analysis, calculations and recommendations. MTBF calculations, prediction based on Mil Standard 217, Relex software (fault tree analysis), FMEA, FMECA, FTA reliability prediction and calculations, reviews,PDR(preliminary design reviews), CDR (critical design reviews)developed and implemented HALT (highly accelerated life test) , Root cause analysis and issue resolution protocols safety and maintainability analysis for all lines of products,ARP4754,ARP4761.

Dec. 2006 - Apr. 2008 Confidential
SENIOR RMS Engineer
Responsibilities included, reliability modeling, MTBF calculations, Develop and implement HALT (highly accelerated life test) , Root cause analysis and issue resolution , design reviews, ,PDR(preliminary design reviews), CDR (critical design reviews),prediction based on Mil Standard 217, Relex software (fault tree analysis), FMEA, FMECA, FTA reliability prediction and calculations, safety and maintainability analysis for all lines of products, ARP4754,ARP4761. Position required occasional travel (traveled to Cedar Rapids, Ohio a few times).

Sept. 2005 - Aug. 2006 Confidential
senior reliability engineer
Responsibilities included Six Sigma analysis (6S), reliability modeling, Develop and implement HALT (highly accelerated life test) , root cause analysis and issue resolution , reviews,PDR(preliminary design reviews), CDR (critical design reviews),work with Relex software (fault tree analysis), FMEA, FMECA, reliability prediction and related calculations, ARP4754,ARP4761. Achieved RAYTHEON Six Sigma specialist status; involved in different projects.

Oct. 2004 – Jan. 2005 Confidential
RELIABILITY Engineer 
Responsibilities included Six Sigma analysis (6S), reliability modeling of aircraft, cost analysis, maintainability analysis, FMEA, FMECA, RELIABILITY CALCULATIONS. 

Mar. 2001 – Feb. 2004 Confidential. 
RELIABILITY-SENIOR QUALITY ASSURANCE ENGINEER 
Responsibilities included Six Sigma analysis, reliability modeling ,automation testing, script writing C language and SQL for Check reader, Card reader, Insert reader, Smart card reader and Micrimage (based on Mil Standard 217, FMEA, failure rate analysis, MTBF, Develop and implement HALT (highly accelerated life test) protocols, root cause analysis and issue resolution, design reviews,PDR(preliminary design reviews), CDR (critical design reviews)maintainability calculations testing). 

Oct. 1999 – Feb. 2001 Confidential. 
EMC TEst Engineer
Responsibilities included performing immunity and testing 61000-4-2, 61000-4-4, 61000-4-5, 61000-4-8, 61000-4-11, 61000-4-3, 61000-4-6, and emission testing 61000-3-2, 61000-3-3 for EMC standards. Products were computers, servers, remote servers, expansion boxes, controllers, etc.

July 1998 – Aug. 1999 Confidential
Quality Engineer
Responsibilities included Six-Sigma analysis and SPC, performing reliability tests for Optical Discs and DVD5 (included all Panasonic titles). Tested DVD cats features, performed variety of tests (Pier, Jitter, Servo, HF Signal); also compared the measurements between Pulsetek and DVD CATS and validated all parameters between the two machines. Worked on DIVX project (simulation software, server analysis, different DIVX players, decommissioning, etc). Performed a variety of tests on Pulsetek; ran DVD 9 tests; worked on WinNT 4.0 for dvd cats and DIVX project; performed internal ISO; trained operators (plastic material; clean room experience)

June 1991 – May 1998 Confidential, Orange, CA 
Test Engineer 
Responsibilities included monitoring the Vertical Thermal Reactor Systems. Performed a variety of tests including electrical system power up, vertical drive test, temperature control test (by profiling certain given set points), advanced robotics for silicon wafer handling tests and gas system interlock test (auto run with the help of UNIX operating system Cell Supervisor Workstation). The systems included atmospheric thermal and low pressure chemical deposition oxidation, POCL3 diffusion and low pressure chemical vapor deposition of Nitride, Poly and Teos. Prepared procedures for Optical Wafer Counter, Uninterruptible Power Supply (UPS) and Exhaust Controllers, Chemical Sensor Detector and an hour meter counter; gained clean room experience.

July 1990 – June 1991 Confidential
Service Engineer
Responsibilities included support, maintenance and repairing various types of base office equipment as well as handling over 35 service accounts. Duties included electromechanical repair of the following machines: Remittance Extractor (R/X), Mail-Ex Payment Processor, Automatic Document Counters, Automatic Wet Sealer, Fold Rite (Model 1217A), Profold Machine and Double Remittance Extractor. Other duties were responding to service calls and dealing with corporate management on job sites; writing reports and related administrative work.

EDUCATION BSEE 
Certificates: AutoCAD, web site development, HTML
(MTI College, Orange, CA—NATTS Accredited)

COMPUTER SKILLS MS Office (Word, Excel, Powerpoint); Windows 3.1, 3.11, Win95, Win98, Win2K, WinNT 4.0; C++, BASIC; Paintshop Pro, familiar with SPICE (simulation program with integrated emphasis)